Most Popular CURT for 2013 Chevrolet Equinox

Exactly what I needed to tow my boat trailer. So easy to find on web site and a very quick delivery time. Very pleased with the entire purchase process and quality of product.

Product delivered in a timely manner and I really like that it was already assembled and ball was tighten to factory torque specs leaving out guesswork. Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs Item # C45036

Everything was as expected. Installation was a piece of cake after watching the very much appreciated video on etrailer.com. The hitch is very sturdy and fit like a glove. I couldn't be happier with this purchase.

Great design, easy install. Runs a touch low but that's how the back of Ford Explorer is designed for after-market installs. I would have probably purchased a hitch with upright assembly if possible.

Very fast shipping. Videos were great for a rookie installer like me. Easy installation. I would definitely buy from etrailor again.

order # 105024469 - my order came in great shape & good service from etrailer--you may need to put foam on steel edges . ups throws boxes around . my order was in great shape .. thank You dan

Top-notch product. Just completed a 1400 mile trip pulling a trailer with my Chevy Equinox and my etrailer hitch: issue free! That's the best

Just recieved my order. Very fast delivery and well packaged. I will update one I have installed and used the items. I really enjoy the instructional videos. It makes life so much easier.

I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.

We sold our small motor home and purchased a small travel trailer. This hitch provided a perfect solution to how to use our bike rack while towing the trailer. It even allows room for the pickup tailgate to be lowered without removing the bikes from the rack. The hitch is very hefty with a high weight limit - plenty for the GVW of the trailer (7,000#) plus 125# of rack and bikes.

Very pleased with etrailer. Very easy to order from website. Fast delivery, easy to install ,perfect fit . Thanks. .

Perfect fit for 2 inch Draw Tite receiver. good price, fast shipping.

I haul a 5.5x10 open trailer w/ a 900 lb. ZTR, a push mower, and a handful of other tools 3 days a week. It is what it is. It does the job, no problem. A little finish wear and rust on the ball, but nothing major. I LIVE ON A DIRT ROAD, which is probably responsible for the wear.

Purchased for a 2006 Jeep liberty. the only issue I have is that it connects right below the spare tire, making trailer attachment more difficult that it should be. If I had gotten a slightly longer hitch, wouldn't have been an issue. It's not a deal breaker, and the hitch itself has works perfectly.

Installation was pretty easy, the tutorial was very helpful. Took me an hour to install everything. And best of all the pricing was the best on the market. Thank you so much!

Easy to install. On the road some other KIA Telluride shouted at me about where I got the hitch. I shouted back etrailer.com and shouted that I installed it myself and it was relatively easy.

Used on my 1999 Dodge Intrepid's CURT 12006 Class II 1.25 in. Receiver Hitch: 350lbsTW/3500 lbs GTW. I use this Curt Class II Drawbar - 3-7/8" Rise - 11-1/4" Long - 3,500 lbs to tow a 3,500+ GTW dual axle trailer. I have used it with the trailer FULLY loaded and it performs EXCELLENT. You have to make sure the trailer is loaded correctly so as not to put too much down force on the tongue/drawbar. I was skeptical that the SOLID 1.25" bar would not take the load, but it is super strong. I chuck it in the trunk when not in use to protect passerby's shins, but it sticks out far enough clear the Intrepid's bumper, and is solid with a 2" ball (required a bushing). etrailer got it out fast at a good price! I would totally purchase this again from them.

Simple as a hammer. Solid steel and quite heavy duty for the intended class.

Awesome service, Great prices and fast delivery. Ordered on a Sunday was notified later that day that my order has shipped and they upgraded my shipping at no charge. Got my stuff three days later. Definitely will be coming back when I need more stuff.

definitely solid as a rock

Good hitch

My order was missing installation parts, but the etrailer team were quick to correct the issue. Even without a lift, I was able to install the receiver and brake light cable quickly, thanks to their extensive video libray.

Hitch is solid and install was 2 hours

3.5 stars. Product looks like it should perform as advertised, but it arrived with several chips in the paint. This is most likely due to improper surface preparation and cleaning before the powder coat was applied. As you can see in the photos, there is already some surface rust on some of the areas, including the hole for the hitch pin. Ultimately the paint will get scratched up from use, but it would be nice to see some extra attention to detail from the factory.

I ordered this item just before midnight on a Saturday, it shows up Wednesday morning at 9am. Super fast shipping, reasonable prices, virtually any kind of towing anything that you could ever need, & the customer service was great. Computers are not my thing at all, but their website made my search and eventual purchase an absolute breeze. I highly recommend them, and I will most definitely shop here again!!

Just what I needed. Shipped and received when etrailer said it would. Not my first order and they are always one of my first visits when I need something for my trailer.

This draw bar in perfect for my John Deere X738 tractor. What I like about it is the ¾” rise it keep the draw bar height at about the same as the factory frame so the attachments height remain level. Thanks for the great product.

Well made, quality product.

The Class II Drawbar is working great with our 2016 Chev. Equinox. Thanks.

I needed to tow a trailer with a 2" ball. My original ball mount has a 1 7/8" ball installed. I had previously tried to change a ball on a hitch and destroyed the nut and damaged the underside of the ball mount. The lock washer had done a great job in keeping the nut from coming off. I dreaded trying to remove my 1 7/8" ball to install a new one that I would only use once. I decided to buy a new ball mount and mount the new 2" ball. This ball mount is so inexpensive that I realized I could have both ball sizes permanently mounted for use in either ball size.

Small footprint makes for classy look on my Equinox. Pulled my Bass boat no difficulties.

It is heavy duty and well-built. I am not disappointed at all and I get comments everyone smile from people who are used to traveling overseas asking where I got the European style hitch from. The only downside is the lack of interchangeability in the size of the ball itself but I don’t think that’s a big deal because I set it up for what I need it for and keep a vehicle vehicle for longer periods of time.

Received hitch receiver and accessories in perfect condition. Installation was very easy. (Especially if you have a lift). I fit this on my 2014 camry SE. Everything fit perfectly. The installation video helped a great deal with measurements. Shipping was fast. I searched around for the best price and etrailer.com had the lowest overall price. Big thanks.

All equipment was delivered on time. Hitch, wiring harness, receiver and ball. Watched video's on installation of harness and hitch. Went down to my garage and installed both with the help of my girlfriend. Very satisfied with the products and the installation. etrailer supplied the goods and the knowledge. I am very happy that I went this route.

The Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 2,000 lbs - C45019 is idle for pulling a utility trailer for most around the house yard work just remember to follow all safety rules.

Very well built and finished. Excellent value for the price. Curt builds an excellent product. Would highly recommend

I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.

I purchased this for use with a friction anti sway device I installed on an enclosed V nose trailer. It worked well.