# 1
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
I had tested while driving with the hitch ball on it and with it on the lowest setting it would scrape against the ground when I am going down a slight slope. I had to switch it to the highest setting to avoid it, it still scrapes so I just leave it off until I need to start towing things.
Perfect fit hitch,wiring kit super easy, great price and shipping. We will be repeat customers when we purchase another vehicle!!!!!!!! Thanks for the great service!!!!
# 2
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
All in one kit is Very convenient. but before you order, ensure the rise/drop of this ball mount is correct for your hitch/trailer. Also - there is a gusset plate welded on the back of the ballmount (Drawtite 2953) in this kit, - on the 2010 Dodge Caravan with the Draw Tite Class III hitch,this plate just rubs/touches the bumper, so this draw bar can't be used on 2006-on Caravan.
Nice little bag to store the extra ball and the ball mount when it is not in use. This is an excellent product, pulled my trailer within minutes of installation without a problem. Great feature with the removable ball, includes the 1 7/8" and 2" ball, this is awesome. The 2 3/4" rise fits my Caravan and trailer like they were custom made for each other. The trailer rides almost PERFECTLY level with the trailer. Put an actual level on the trailer after hooking it up and it is only a hair off the level, and of course this is probably due to road conditions. Great product at a fabulous price! I have informed all of my friends and family where to go for all their trailer needs. Thanks ETRAILER.COM! ! !
# 3
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
I bought this separately when I bought a new hitch. It appeared to be less expensive to buy the hitch, ball mount, and ball all separately. there's not much to say, just get the one with the correct amount of rise/drop for your car and trailer. 2" rise is what I needed for my Grand Caravan and jet ski trailer.
All ordered parts arrived in good condition, and were correct. Impressed with on time delivery. Hitch and wiring harness were a perfect fit. Only had trouble finding correct wire from brake light switch on 2016 Dodge Caravan .
# 4
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
Works as it is supposed to, and delivered on time.
The web site is so informative with reviews and how-to videos that it made the decision very easy to determine what drawbar kit I needed for a 2012 Grand Caravan. I like the fact that I did not need to talk to customer service to figure out what I needed, all the information was available. Price and shipping was very competitive and I received the order in 3 days.
# 5
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
# 6
Drawbar for 1-1/4" Hitch - 2-5/8" Rise, 3-1/4" Drop - 7-3/16" Long - 3.5K
Works as it is supposed to, and delivered on time.
I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience.
# 7
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K
Works as it is supposed to, and delivered on time.
The purchase was what I expected, it was well packed and delivered very quickly. I would order from etrailer.com again.
# 8
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Looks well made and arrived very promptly
Ordered a Curt trailer hitch receiver to mount on a 2003 Dodge Caravan to pull an old Scamp trailer. Came promptly, installed easily and works well. Thanks
# 9
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Ordered a Curt trailer hitch receiver to mount on a 2003 Dodge Caravan to pull an old Scamp trailer. Came promptly, installed easily and works well. Thanks
This Curt draw bar is well made and finished to last. I also ordered a Draw Tite trailer hitch- and tried to use this draw bar from Curt- and it wouldn't fit into the other manufactures hitch- so I'll have to grind some of the paint off to get it to fit. If I had it to do over- I would have ordered a bar from the same manufacture as the trailer hitch. My order came quickly and undamaged. The specs and descriptions were helpful when ordering.
# 10
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
Raised receiver portion was exactly what I needed to attach my cargo carrier, as my Grand Caravan Receiver was too low to the ground.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 11
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
Ordered this hitch and it worked perfect for what I needed just bought a teardrop trailer. Couldn't open up the tailgate on my Jeep so I ordered this extended hitch and I brought the ball out past my spare tire and the tailgate opens up now I have no problems. And I looked everywhere couldn't find one of this quality and at this price very reasonable the other ones hundreds of dollars didn't want to spend that much.
This was the longest hitch ball mount I could find anywhere. I used it with a short extension for my 2021 T G so that I could open the back doors without hitting the trailer wheel crank. With my new trailer, Intact Flyer Discover, I don't need the extension and can still open the doors. Works well.
# 12
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
# 13
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs
Works as it is supposed to, and delivered on time.
Delivery was delayed from the manufacturer. Further delay was encountered when shipment was mis directed to Sheboygan. When it finally arrived there was a hole in the box and the receiver was poking out. Lucky the paint wasn't damaged. The part is what I ordered.
# 14
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
There were some UPS delivery issues, damaged in shipment. But, etrailer.com jumped right on sending out another shipment after it was apparent that UPS would not complete the delivery. The installation took longer, maybe 1-1/2 hours, because I did not have all my tools ready and I was working on the concrete floor in the dark to outside with a portable shop light. Everything fit well and it looks great. The 2" drop ball mount was the perfect height for my 2019 Toyota Highlander Hybrid. I love the look of the Curt black insert that makes the hitch looks like it belongs on the car, nothing embarrassing at all. Anything negative? Maybe. The flat plate was a little difficult to hook onto with the UHaul safety chains on a 5x8 trailer. That's hardly a negative, though, and I wouldn't have spent more on another brand choice because of this. Happy happy!
# 15
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
definitely solid as a rock
# 16
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Great product
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 17
Curt Ball Mount for 2" Hitches - 8" Rise, 9-1/4" Drop - 14" Long - 5K
The product came perfectly.. i didnt had a hard time to installed it by myself...
Was nice to have the ball attached to the receiver. one less thing to do in the installation process
# 18
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
Works as it is supposed to, and delivered on time.
I needed to find a hitch for a 2005 Dodge Caravan. I found this website and typed in the information needed (make, model, year) and up popped a detailed listing of the types of hitches I could use, with the prices and the amount of time needed to install the hitch. I ordered the hitch and received an email when the order was processed, plus an email with a tracking number as well. The unit arrived very quickly with no damage or scratches. The next day I installed the hitch according to the instructions included with the unit. I did this installation alone and it took less than 2 hours. The unit fit as advertised and looks very nice. I could not be more pleased with the hitch. I also bought the wiring harness for my vehicle and the drawbar kit as well. All items worked as they should. The instructions for the wiring harness were excellent as well. This was a one stop shop very simple a great experience.
# 19
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Great hitch, easy to use and a great value.
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
# 20
Curt Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-1/4" Long - 3,500 lbs
Ordered a Curt trailer hitch receiver to mount on a 2003 Dodge Caravan to pull an old Scamp trailer. Came promptly, installed easily and works well. Thanks
This Curt draw bar is well made and finished to last. I also ordered a Draw Tite trailer hitch- and tried to use this draw bar from Curt- and it wouldn't fit into the other manufactures hitch- so I'll have to grind some of the paint off to get it to fit. If I had it to do over- I would have ordered a bar from the same manufacture as the trailer hitch. My order came quickly and undamaged. The specs and descriptions were helpful when ordering.
What our customers are saying:
"Quick processing, and delivery. reasonably priced very satisfied"