# 1
Dexter Trailer Springs Over-Under Conversion Kit
I have a 99 cummins with 35s and a 5 inch lift. My 5th wheel now sits level and I even raised the king pin up another hole. I'd definitely buy this again
Kit arrived missing all but 2 of the ubolt nuts. No biggie, had some on hand. Went to install ubolts and they were too short. Bought new ones. Went to use top plate and it was too narrow. Had to make new ones. Only thing I used was the axle perches... Which you can buy anywhere. Total waste of money. Make your own kit like I ended up doing.
# 2
Dexter Trailer Springs Over-Under Conversion Kit
I ordered this kit to keep my 19' Coleman tent trailer from dragging the rear bumper on direveway approaches. Install was super simple, finished everything in about 40 minutes. I gained about 5 inches of added height. I chose to not tack weld the perches in case the next owner doesn't like the height. No problems with a few thousand miles of rough roads. Highly recommended.
It's not rocket science.... Very easy to install. I out these on a 20' big Tex trailer and did very small welds incase I decided to sell I can put it back to the original height. It raised the dovetail in the back 5 inches and couldn't be happier as we take a couple of rzrs in the mountains and it was tough getting this trailer in places without dragging it. I would recommend this kit
# 3
Nylon Bushing - 9/16" Inner Diameter, 11/16" Outer Diameter - 1-3/4" Long
Parts arrived in a timely manner and were as advertised...Great service from this company.
Excellent service and quick delivery and great price, all looks good, thanks for helping me out with these items that I can't find around my area anymore,AES
# 4
Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
Good quality delivered quick
New bolts made replacement of springs easy
# 5
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
Well hello, I dont do many reviews but I will have to say that the people at etrailer are very nice and very easy to deal with and they know there business for sure , I havent installed my parts yet and they arrived dead on time and I knew every step the parts made along the way to me . So far I am very pleased and that is hard to do with me as 99 percent of the time nothing is ever the way suppliers say it going to be until now with etrailer , very nice job guys and thank you and I will be installing everything this weekend and will do another review and will have some pics along the way, And by the way thank ou for keeping the prices affordable for us out here in the field trying to keep our equipment rolling and safe , with your prices no reason to be able to do just that , again great job guys .
Suspension parts worked just as expected and shipping was prompt. Good experience.
# 6
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 6,000 lbs
After a year and 20,000 miles, this was one of the best upgrades in towing and ride on my 42' fifth wheel. It took out a lot of the small bumps that would open cabinet's and knock things over in the shelves. Another great advantage is the bronze bushings are greasable and do not squeak like the OEM plastic, the OEM bushings had around 3000 miles and we're already worn through, the bronze if kept greased will probably last the life of the trailer.
You can tell a company that you want to do business with when something goes wrong. They did the right thing and upgraded the shipping so we can make our vacation spot on time when these slipped through shipping some how. Anyways they have me as a customer for life now! THANK YOU Jennifer and George. You are the reason I am now a happy camper!!!
# 7
Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
Perfect replacement. Easy installation took about hr to install each side.
# 8
Spring Seat for Typical 3,500-lb, Round Trailer Axles with 2-3/8" Diameter
It looks like it will fit my 1954 Jeep CJ3-B Dana 44 axle tube, although it is 1/8" wider than ideal. Thanks
Spring perches as described
# 9
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
Nice upgrade kit to replace worn parts on a 3 horse tandem axle trailer. Having the beefier shackle straps, bronze bushings, and ability to grease the moving points is a beautiful thing.
During my yearly maintenance i found a issue with 1 of my spring equilizers and all of my bushings were worn out "got my moneys worth out of them" etrailer sent this kit and it only took me 2 hrs to install and get back on the road
# 10
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front/Rear, 2-1/2" Center
Great fit. I called to ask what I needed and etrailer made the right suggestions. Fast and friendly service for you trailer needs.
Rec'd item quickly along with new wheels I purchased. Items were packed very well. I installed my new wheels, tires, and equalizer kit the following weekend and my trailer was ready to go.
# 11
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
I really wanted to give this kit a 5 star review, however it fell short in more than one way. The parts are very nice and heavy duty looking and went together purrty good. However, when I went to grease the shackles none took grease it just came out around the fitting, so I changed the end on my grease gun thinking it was just worn out, still same problem. I had to hold the fitting on the zirk as hard as I could and finally got them to take grease, one still hasn't taken grease and not sure what I'm going to do. I left all hardware loose to this point to make sure there was no un nessesary pressure on anything hoping it would take grease easy. It's like the heads of the zirks are a size to small. After greasing everything the best I could I tightened everything up, during this process I had 2 nuts that the threads pulled out of... Just as they got tight they started to loosen up, I was using a standard length 1\2 drive craftsman ratchet, and I'm not hulk. I ended up having a few nuts and washers that worked but still this shouldn't have happened. Makes me wonder about the rest of the metals strength. Looks heavy duty but I'm starting to wonder about longevity.
After receiving my shipment yesterday, I was concerned that parts may have been missing due to the shape of the shipping box and the lack of packing material. During the installation of the shackles, the third shackle nuts/bolts stripped out when tightened by hand. The shackle had to be cut off since the nuts could not be properly tightened. I have emailed etrailer with this issue and hopefully we can resolve the issue quickly.
# 12
Single-Axle Trailer Hanger Kit for Double-Eye Springs - 1-1/2" Front, 7/8" Rear
Gracias
Excellent, had everything I needed and more for my trailer. Everything fit well!
# 13
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
Axles flipped, and going down the road.
The axles that I ordered last year are still working out great. But even better than the parts was the service I got from etrailer. It was so great working with a company who took the time to listen to my project and help me get the right parts I needed, especially coming right off the heels of a terrible experience dealing with bad information and wrong parts from a competitor. Even with some damages in shipping, the returns/ and replacements were no hassle, with most issues being quickly resolved and not even costing me any additional downtime. As a contractor keeping a small fleet rolling, your competency and professionalism have made me a customer for life!! You guys at etrailer will be my first stop for trailer parts.
# 14
CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
Arrived well packed and as advertised. I'm going to pull the azle out of the boat trailer and wanted to have this 'on hand' should I break some of my U bolts. I've bought from you before - always been happy, thanks
Worked perfect for mounting a storage box to my boat trailer.
# 15
Triple-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
Looks to be a perfect fit for the tri-axle trailer. Well made and packaged with fast shipping, as was expecting it several days later, surprised it arrived so soon. Thank you.
Customer Like this
# 16
Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers - 5,200-lb to 7,000-lb Axle
Arrived very well boxed, nice heavy brackets, fit well with exception of trying to get angle and length both correct. But after a bit of thinking and grinding and welding every thing worked out quit well. Will find out next week how much improved it will be, as we start our annual long trip estimate about 12,000 miles this trip out.
I got my parts yesterday and everything was packed properly and all there. The instruction sheet with a complete parts list along with bolts and other parts. It will be a few days before I install the kit but from the instruction sheets and the u-tube video, I think it will be a simple job to accomplish. E-trade seems to have made the kit and system for anyone with simple tools to install. Thank you for your quick shipping.
# 17
Dexter Bronze Bushings - Qty 4
Received parts on time.
Installed these with the Lippert AP wet bolt kit and Road Armor Shock Absorbing Equalizers. No more clanking and banging from the trailer going down the road and especially making tight turns.
# 18
Replacement Shackle Strap - 2-5/8" Long
Good product very satisfied
I was very disappointed when I received the shipment from etrailer and only half the parts were there. When I made the order I was told everything was in stock and would be shipped.
# 19
Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
Great upgrade for my Dexter axle. My old hangers were toast and of much lesser quality. I have about 40,000 miles on the old set.
My small travel trailer had an awful suspension system creak. It was embarassing to drive through a campground. Not only that, that noise must have indicated things were experiencing unusual wear. Since the suspension upgrade, the creak is gone. I had my upgrade installed by a mechanic, but someone reasonably handy could likely do the job themselves.
# 20
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
Delivery was as promised and all parts were there. Great service. Raised 5th wheel 4 3/4 inches so it would be level when hooked up to 2016 Ram 2500.
After a year and 20,000 miles, this was one of the best upgrades in towing and ride on my 42' fifth wheel. It took out a lot of the small bumps that would open cabinet's and knock things over in the shelves. Another great advantage is the bronze bushings are greasable and do not squeak like the OEM plastic, the OEM bushings had around 3000 miles and we're already worn through, the bronze if kept greased will probably last the life of the trailer.
What our customers are saying:
"I installed it today and it went very well. Thank you for your prompt response and very fast shipping. I am really pleased. I hope I will be able to do business with you again."