Summer Starts Here - Save up to 70%
# 1
Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs
I have had a problem with my carrier for my mobility scooter. It has always been too low. With the D210 receiver it raised the carrier another four inches. The quality of the product is excellent.
I am using the hitch for a car dolly and a bike rack. The fit is a little loose for the bike rackmI'll see it really works when get on the road.
# 2
Curt Class II Euro Style Drawbar with 2" Ball - 3-1/8" Rise - 3,500 lbs
Incorrectly listed on etrailers as a 3-1/8” rise, when really this is a 5-1/8” rise (marked correctly on the item itself, but listed incorrectly on this website).
I am completely satisfied with the product. Great quality and excellent finish. Prompt shipping and excellent customer service. It is stylish and functional and will meet my needs for towing up to 3,500 pounds. I would definitely do business with this company again!!!
# 3
Brophy Drawbar for 1-1/4" Hitches - 5-1/2" Rise, 6" Drop - 7-1/4" Long - 3.5K
Quality parts, but the extra rise with this and the Curt Rocker Ball still wasn’t enough to avoid scraping the top of my inclined road while towing my boat.
Purchased a vehicle with a class 2 factory hitch installed. This was the proper drop to haul my band trailer. First trip went without an issue.
# 4
Curt Class III Ball Mount with 1-7/8" Ball - 4" Drop - 3,500 lbs
It will have to be returned. Not long enough!!!
Great price. Arrived a day earlier than expected. Well packed. Easily installed. Fit like a glove.
# 5
Curt Class II Drawbar - 3-1/8" Rise - 11-1/4" Long - 3,500 lbs
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
It did not fit . I had to grind it down so it would fit the reciver.
# 6
Curt Dual Length Ball Mount for 2" Hitches - 2-3/8" Rise, 3-5/8" Drop - 7,500 lbs
Fits my Forester dealer-installed 2 inch receiver perfectly with the pin (purchased separately) in the first hole. The gas tank is in the way so I can't push it in further to the second hole. It is impressively strong, so there is no problem with it extending rearward a bit, but ideally I would get a shorter hitch if I could have a do-over, just for ease of storage.
Purchased to extend the trailer away from the back of the vehicle, and increase the drop. Initially could not fit in to my receiver, eventually figured out that the end of the 2" square was mushroomed, had to remove excess metal with a rotary tool. now it fits as far as the first 5/8" pin hole. No issues with use - seems sturdy, metal finish seems durable. Didn't drop the trailer tongue as much as I had hoped, but that's on me - I was probably running a 3" drop before, but I thought it was 2".
# 7
Curt Class II Euro Style Drawbar with 1-7/8" Ball - 2-3/4" Rise - 3,500 lbs
Very nice product! Appears like the European models. That is what I was looking to obtain. Will be used for show on my 1957 Triumph TR3.
100's of miles on it and all is well.
# 8
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
Good price, fast order processing and fair shipping.
Easy ordering, fair pricing, prompt delivery...product arrived in excellent condition, very heavy duty drawbar for use with by 4ft x 8ft medium duty trailer.
# 9
Curt Class II Euro Style Drawbar with 2" Ball - 2-5/8" Rise - 3,500 lbs
It isbthe right size and helps with the height difference to make the trailer more even with the back end of my Accord.
Look and quality of the mount is awesome. Beefy in size as well. If using on my particular application, removal of rear diffuser is necessary. If they had extended it another inch it woulda been perfect. 2015 Audi a3 tdi. Wouldn’t let me add a third pic but it’s a finger tip space between the ball and bumper with diffuser removed.
# 10
Curt Class III Ball Mount with 2-5/16" Ball - 2" Drop - 7,500 lbs
It will have to be returned. Not long enough!!!
Great price. Arrived a day earlier than expected. Well packed. Easily installed. Fit like a glove.
# 11
Curt Class I Drawbar - 5/8" Rise, 1-1/4" Drop - 6-3/4" Long - 2,000 lbs
It did not fit . I had to grind it down so it would fit the reciver.
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
# 12
Curt Class II Drawbar - 5" Rise - 9-5/8" Long - 3,500 lbs
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
It did not fit . I had to grind it down so it would fit the reciver.
# 13
Curt Class I Drawbar - 5" Rise - 9-9/16" Long - 2,000 lbs
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
It did not fit . I had to grind it down so it would fit the reciver.
# 14
Curt Multi-Ball Mount for 2" Hitches - Solid, Black Powder Coated Shank - Black Balls
Weights a ton. Seems very strong...10,000 pounds using the 2 5/16s balls. Good paint.
Functionally, this hitch has been great with no issues to date. Aesthetically, the black color did quickly fade to a gray color within a couple of months. Ball surface also presented rust after very minimal use. That being said, I did buy a hitch to tow trailers, not look pretty.
# 15
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs
Product delivery great
I love at the heavy duty construction of this ball mount and ball. I also like the fact that it came with the pin. I am definitely happy with this purchase!
# 16
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
Good price, fast order processing and fair shipping.
Items packed well delivered on time. Doesn't get much better that that.
# 17
Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 9-3/4" Long - 3,500 lbs
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
It did not fit . I had to grind it down so it would fit the reciver.
# 18
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Very easy process. Best price on hitch and accessories. Delivery was right on time. Only thing to check is ball size thread diameter. Hole in receiver is for 1" stud. I'm using a 1 7/8 " ball and still looking for ball with 1" stud. Definitely will order again.
The hitch was the correct one for the car, and the cable harness and receiver was correct also. Delivery was extremely fast: ordered on Wednesday, delivered on Friday. All necessary parts were included, including instructions for torquing down the bolts. I installed the hitch, 'without a hitch' on Saturday. It took about an hour, since I don't have any air tools. All in all, I am very satisfied, and would recommend your company. Thank you.
# 19
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Works great used for 3 different trailer we have handy it's heavy well made.
# 20
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
Appears to be as described...a top quality ball mount riser/extension for 1 1/4 x 1 1/4 in hitch opening. Perfect for my 2008 KIA Sportage. Very satisfied.
It did not fit . I had to grind it down so it would fit the reciver.
What our customers are saying:
"WOW! I compared prices with a local dealer and saved $85 over 25% on my purchase and had it delivered to my door."