2008 Ford F-450 Super Duty Truck Bed Rail Caps

The pin box on your 2023 Heartland BigHorn 3970RL is a Lippert 1621. The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR will fit the bolt pattern but I'm not 100% sure it is the correct capacity. You need to make sure…

We do have the exact suspension enhancement you are looking for your 2007 GMC 2500HD Classic with the Roadactive kit part #RAS3611-HD. This kit gives you improved ride quality loaded and unloaded, has an easy install, is adjustable, and improves…

Thanks for the information. I checked with TruXedo and to replace just the cover on your 2012 Ford F-150's 5-1/2' bed you will need the Replacement Cover for TruXedo Lo Pro Soft, Roll-up Tonneau Cover item #TX5671-CVR. You will want to put…

You will want the hitch to be set at the height that 1) allows the trailer to be level, and 2) allows you a minimum of 6 inches between the bottom of the trailer loft and the top of the bed rails. The fifth wheel hitches offer several inches of up…

When adjusting the arms of the #BWRVK3305, you have the option of setting up so the king pin will sit 3 inches forward or 1 inch forward of the axle. I'd set it up at the tallest height, 18-3/4 inches above the floor of the truck bed and 1 inch…

The Underside Tie Down Point #RRS606 will fit into the tracks on the underside of a Rhino-Rack Pioneer Platform Rack like the #RR78AB. Regular tie-downs #RR43VT and eye bolts #RR46XP are also available for the top channels on the rack.

Yes, we carry the 1706707 as the TruXedo Stake Pocket Covers #TX86QV, which will come with six stake pocket hole covers for a 2022 Ram 3500 with an 8' bed. For a short bed you would need the TruXedo Stake Pocket Covers #TX22AR, which would come…

I spoke with Super Springs about the Coil SumoSprings Custom Helper Springs part #CSS-1145R for your 2012 Toyota Highlander Hybrid. The issue is not that it is not a fit but rather they have not yet had a Hybrid model in to test them on. If you are…

There are 2 basic tie-down style accessories made for your Rhino-Rack Pioneer Platform Rack: - Eye Bolt Kit #RR43178 - Tie-Down Anchors #RR43VT The eye bolts provide more of a rigid and established point while the anchors have more of a sleek design…

I would not recommend the part #RAS3611-HD for your 2017 Nissan Titan XD. This kit is designed for heavier duty vehicles so it would make your suspension harsh. The part #RAS3611 is the correct kit you'd want. It will give you the suspension…

You cannot tow the trailer with the slider hitch in the maneuvering position. The trailer should actually be centered directly over the rear axle or a few inches forward of it but not behind it at all. That will cause all sort of issues such as…

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box - Lippert 1621/1621 HD - Auto Latch - 25K #GY66FR you were looking at is a confirmed replacement for your Lippert 1621 HD pin box and will not require any shims. The #GY66FR has the same…