Trailer Brake Controller Specs:
Features:
...circuit breaker (38630 - sold separately) for 6- to 8-brake applications Proportional Braking The Tekonsha Prodigy P3 brake controller comes equipped with proportional braking to give you the best towing...
Installation Notes:
You will also need item 30955 ($38.81) to complete your wiring.
No plug is present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash.
More Information >Trailer Brake Controller Specs:
Features:
...7- and 4-way brake controller installation kit (ETBC7 - sold separately). Proportional Braking The Tekonsha Prodigy P2 brake controller comes equipped with proportional braking to give you the best...
Installation Notes:
More Information >Trailer Brake Controller Specs:
Features:
...cord: 1-year limited Remote: 5-year limited Trailer-Mounted Brake Controller The Tekonsha Prodigy RF is a completely plug-and-play option that's easy to install and simple to use. It mounts on your...
Installation Notes:
You will also need item 30955 ($38.81) to complete your wiring.
More Information >Trailer Brake Controller Specs:
Features:
...cord: 1-year limited Remote: 5-year limited Trailer-Mounted Brake Controller The Tekonsha Prodigy RF is a completely plug-and-play option that's easy to install and simple to use. It mounts on your...
Installation Notes:
More Information >Trailer Brake Controller Specs:
Features:
...9506P - sold separately) for 2- to 4-brake applications 30-Amp circuit breaker (38630 - sold separately) for 6- to 8-brake applications Proportional Braking The Tekonsha Prodigy P2 brake controller comes...
Installation Notes:
You will also need item 30955 ($38.81) to complete your wiring.
No plug is present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash.
More Information >Trailer Brake Controller Specs:
Features:
...exclusive 7- and 4-way brake controller installation kit (ETBC7 - sold separately). Proportional Braking The Tekonsha Prodigy P3 brake controller comes equipped with proportional braking to give you the best...
Installation Notes:
More Information >Trailer Brake Controller Specs:
Features:
...Brake Controller The Tekonsha POD is designed to mount in any direction, and it's especially suited for mounting on near-vertical dashes. All the controls are on the front of the module, so you can...
Installation Notes:
More Information >Videos
for Trailer Brake Controller
Help Articles
for Trailer Brake Controller
Expert Answers
for Trailer Brake Controller
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
view full answer...The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…
view full answer...If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your…
view full answer...If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…
view full answer...You are correct, you should only be getting output when the brake is applied, or the override switch is activated. It sounds like the controller might be bad, but to make sure, you should probably bench test it before tossing it. Use a circuit…
view full answer...The OEM prep package consists of 4…
view full answer...Hey Rick, There isn't a custom-fit wire harness for your Chevy Express so…
view full answer...Yes, when installing the knob for the Redarc Tow-Pro Liberty Brake Controller item #RED24FR you will want to remove any extra material behind the insert. I am happy the video was able to help you out. I have linked a couple of pictures from the…
view full answer...All the brake controller needs to sense a trailer connection so that you can test it is a slight amperage draw on the output circuit. For that you can use a circuit tester like the part #PTW2993 with one pin grounded and the other on the output…
view full answer...Filter Products (7)
Contact and Help
What our customers are saying:
I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD