2014 Chevrolet Express Van Brake Controller

Features:

This time-delayed brake controller has a straightforward design that makes it easy to use. Includes an LED indicator and manual override. Activates brakes with a preset intensity.

Installation Notes:

Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.

If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.

Features:

This time-delayed brake controller has a straightforward design that makes it easy to use. Includes an LED indicator and manual override. Activates brakes with a preset intensity.

Installation Notes:

You need item ETBC7 ($129.49) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.

Features:

The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.

Installation Notes:

Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.

If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.

Features:

The large buttons and colored LCD display on this proportional brake controller make it easy to see and easy to use. Store and customize your settings so you can easily swap out trailers and drivers and get towing.

Installation Notes:

You need item ETBC7 ($129.49) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.

Features:

This proportional brake controller automatically syncs to your vehicle's computer network for smooth, precise braking. Low-speed brake adjustment gives you 2 settings for different speeds. Plug-and-play controller mounts in any direction.

Installation Notes:

Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.

If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.

Features:

This proportional brake controller automatically syncs to your vehicle's computer network for smooth, precise braking. Low-speed brake adjustment gives you 2 settings for different speeds. Plug-and-play controller mounts in any direction.

Installation Notes:

You need item ETBC7 ($129.49) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.

Features:

This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large digital LED display, fingertip gain control, a slide-bar manual override, and built-in safety features.

Installation Notes:

You need item ETBC7 ($129.49) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.

Features:

This proportional brake controller keeps it simple with intuitive controls that are easy to use. Includes a large digital LED display, fingertip gain control, a slide-bar manual override, and built-in safety features.

Installation Notes:

Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.

If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.

Features:

Power output and braking aggressiveness can be easily adjusted with built-in buttons on this time-delayed brake controller. Includes digital display and manual override. Activates brakes with a preset intensity.

Installation Notes:

Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.

If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.

Features:

Power output and braking aggressiveness can be easily adjusted with built-in buttons on this time-delayed brake controller. Includes digital display and manual override. Activates brakes with a preset intensity.

Installation Notes:

You need item ETBC7 ($129.49) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.

Features:

This proportional brake controller keeps towing simple with a straightforward design and user-friendly controls. Includes an LED indicator and a slide-bar manual override. Adhesive backing gives you the option of drill-free mounting.

Installation Notes:

You need item ETBC7 ($129.49) to install your controller.

You may also need a 4-Flat connector to complete your wiring.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.

Features:

This proportional brake controller keeps towing simple with a straightforward design and user-friendly controls. Includes an LED indicator and a slide-bar manual override. Adhesive backing gives you the option of drill-free mounting.

Installation Notes:

Vehicles with the 7-Way tow package have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.

If your vehicle has a round plug with a cap inside the driver's side frame rail instead of a bundle of wires in the jack storage compartment, use part # 30955.

Some models will require a wiring kit to run wire to the battery. This may require drilling a hole in the firewall to run the wire. You may use kit 5506 which includes 20, 30, and 40 amp breakers.

Tech Tip:

Some models will have the connection wiring taped and tucked under the driver side floor mat up towards the firewall.