1974 GMC C/K Series Pickup Brake Controller

Features:

...don't need it Replacement wiring harness (sold separately) and replacement bracket (TK5906 - sold separately) required to swap controller between vehicles Specs: Application: trailers with up to 4 axles...

Installation Notes:

You need item ETBC7 ($129.02) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

...between vehicles Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Dimensions: 5-1/8" long x 3-1/8&quo...

Installation Notes:

You need item ETBC7 ($129.02) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

...trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Main unit dimensions: 3" long x 3-1/2" wide x 7/8" tall...

Installation Notes:

You need item ETBC7 ($129.02) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

...sold separately) prevents sway Tire Linc (C54VV - sold separately) monitors your tire pressure and temperature Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible...

Installation Notes:

You need item ETBC7 ($129.02) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

...vehicle-specific brake-control adapter (sold separately) available for select vehicles to reduce installation time Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric brakes...

Installation Notes:

You need item ETBC7 ($129.02) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.

Features:

...in any orientation - no drilling required Specs: Application: trailers with up to 4 axles (8 brake assemblies) Compatible with electric or electric-over-hydraulic trailer brakes Dimensions: 6-1/4"

Installation Notes:

You need item ETBC7 ($129.02) to install your controller.

Some models have the brake (blue) and hot lead (orange or red) wires already ran to the rear of the driver side frame rail. However, these wires are hard to access and additional wire will be needed. We still recommend using part ETBC7.

You may also need a 4-Flat connector to complete your wiring.