The Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS) # Y07235 is the lock you are seeking. It is designed to work with the Replacement Hitch Bolt, Nut and Clip for Yakima Bike Racks and DryDock Load Assist - 2" Hitches # Y8780022 which is a fit for your BackSwing 4. view full answer...
The Advent Air RV Air Conditioner # ACM135 will be a direct replacement for your AC135 unit. This can be used for ducted or non-ducted applications and you won't need anything else to make it work.
I do, however, recommend also getting the Start Capacitor # ACMSCKIT to install with this unit simply because it greatly reduces the amount of power required to start the AC unit. A start capacitor is becoming more and more common as a standard feature on AC units so any time you have the opportunity... view full answer...
For the module you'll want the Replacement Sensing Control Panel for Power Gear Single Rail Above Floor Sofa Slide-Out # LC27WJ and for the harness you'll need the Replacement Wiring Harness for Lippert Power Gear Slide-Out Controller # LC99WJ. view full answer...
I went through the instructions and replacement parts for a Thule 9025 Apex 4 bike rack, but I was unable to find a replacement nut or washer. However, I did find the bolts and wrenches that are direct replacements. The # 852-311-5001 (M6-25mm Button Head Screw) and # 852-3136-001 (M8x30 Flat Head Screw) will be the replacement bolts, and the # 853-2430-02 (4MM Hex Key) and # 853-0930 (M5 Hex Key) will be the replacement wrenches. view full answer...
I recommend going with an entirely different tire for your application. When I reached out to Duro about the speed rating the reply I got back was that their standard trailer tires have a max 60 mph speed rating.
For your trailer I recommend going with the Taskmaster listed below:
- Taskmaster 4.80R12 Radial Trailer Tire # TT48012C
This is a Load Range C (990 lbs at 90 psi) like what you currently have, but it's also rated for 81 mph so you can safely travel at normal highway speeds.... view full answer...
The 1/2" Bolt # 337FCB050013200 will fit with the Trailer Hitch Spacer Block # RP3022, but if you're looking for replacement hardware for a trailer hitch that fits your 2012 Chrysler Town and Country, like the etrailer # e98854, then you actually need 10mm and 12mm bolts that have a hex fitting for the head instead of a rounded head like the 1/2" bolt you looked at.
For a complete replacement hardware set you can use part # RHK and then input your trailer hitch info and we can send you... view full answer...
The Dexter Heavy Duty Suspension Upgrade Kit # K71-358-00 is a great choice for an upgrade to your single axle trailer. This includes wet bolts, steel bushing, and 1/2" thick steel shackles straps that will last.
For your hangers, you will need to measure your current hangers to find the right height. This is the distance from the center of the bolt hole to the top of the hanger. For example, if you got a measurement of 3-1/4" you could use the # 28-5 for a replacement.
Regarding an... view full answer...
Your Kar-Rite cargo box can use Replacement Locks and Keys Kit # SR03807 from SportRack.
Thank you for the photo of the box underside showing it's mounting straps. We have never seen a cargo box that used straps for attachment so I expect this was possibly a home-brew modification. We suggest using replacement mounting kit # TH04997.
If you need to drill new holes to match the new hardware you can use a silicone sealant like # LT37467 to seal up any extra openings in the bottom of the box. view full answer...
I spoke with my contact at Thule and she stated that the Quick Grip Mounts consist of 3 parts. First, there is the assembly itself, # TH05738. There is also a cradle, # TH8523387001, and a slide strip, # TH05401. If additional hardware is needed, there is also screw # TH05728.
There has also an older system, Thule QM3 Quick On-Off Mounting Hardware Kit, # TH04997, that was used in some boxes. Instead of u-bolts or clamps like the other 2 kits above, this kit uses several brackets and 2... view full answer...
Thank you for the photo!
Since your current drum brake assembly is part 023-342-00 from Dexter Axle the replacement brake kit for both sides of your axles is part # 23-342-343. You will need one kit for each axle on your trailer. These are free backing 12" x 2" brake assemblies from Dexter Axle.
Attached is a review video for you to check out as well. view full answer...
We do indeed!
What you will need is our part number # RHK. All you will need to do is enter the hitch part number (76046 in your case) in the box above the "Add To Cart" button. This will then include all the bolts, washer, nuts, bolt leaders/fish wire, and spacer plates that would have come with the hitch originally. view full answer...
The only option we offer to replace the brake magnet spring on a Dexter Electric Trailer Brake Kit (23-434/23-435) part # 23-434-435 is with the Replacement Magnet part # BP01-306. We also offer the Replacement Brake Spring Kit part # K71-506-00 if you need any other springs. view full answer...
Yes. The Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black # 295-000019 and the Replacement Cam Lock Cylinder for RVs - Keyed Alike Option # 295-000003 will all come keyed the same when you select keyed alike from both products within the same order. view full answer...
Sears' Karrite rooftop cargo boxes were made by Thule and so Thule replacement keys will work fine for you. For a lock with code 2806 you will want to order part # THKEYN2806. This is sold as a single key so you might want to get a couple so you always have a backup spare. view full answer...
The replacement hardware kit for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75579 is under part number Item # RHK. This kit will include the bolts as well as all the other installation hardware.
If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item Number. You would enter part # 75579.
Next, select Draw-Tite from... view full answer...
To install a 7-way connector on your 2017 Pacifica you will need part # ETBC7. This plugs into the 4-way connector on the back of your vehicle.
Additional wires need to be run from the # ETBC7 as shown in the attached drawing. You can cap the wires you do not need to use. The kit does include a mounting bracket for the wiring connector you can use. If you do not want to drill holes to mount the trailer harness you can use the no-drill bracket like part # 18140.
If you need the 7-way... view full answer...
When we installed the Curt hitch # 13364 on a similar 2012 Chrysler Town and Country we found that from the ground to the bottom of the hitch is right at 9-1/2 inches. view full answer...
We do have a replacement hardware kit for the Draw-Tite Hitch # 75119. You will need the Replacement Hardware Kit for Trailer Hitches # RHK.
Make sure that in the pull down menus (below the Shipping Special box) that you insert your hitch number, 75119, and the manufacturer of the hitch (Draw-Tite) so that you get the correct hardware kit.
Pricing is available once you input all the necessary information. view full answer...
Yes you can get just the installation hardware for the trailer hitch for your 2013 Chrysler 200. You will need # RHK. Enter in the hitch number where indicated on that page then select the manufacturer of the hitch you have and the correct hardware kit will be assembled for you.
If you are not sure of the hitch you have I have included a link to all of the hitches for the 2013 Chrysler 200. view full answer...
It appears that your 1999 Forest River Flagstaff 176ED has a 2,000lb axle. This will require the 7" Dexter Electric Trailer Brake Kit # 23-47-48 to replace the electric brake assemblies. You can verify this is the correct kit by measuring the drums on your Flagstaff and verifying the mounting flange dimensions on the axle. The mounting flange will have bolt hole 2-7/8" on center both vertically and horizontally. The inside of the drum will be 7" in diameter. I have included some images... view full answer...
Go To Results