According to the instructions which I have linked for you for Air Lift suspension enhancement # AL60769, the maximum air pressure is 35 psi and the minimum is 5 psi. Over-inflation and under-inflation can damage the air bags so you will always want to stay within the 5 to 35 psi range. view full answer...
Congrats on the new vehicle! The best hitch for a 2024 Cadillac XT4 is the Curt item # C39FR. This hitch is custom fit and bolts to your Cadillac with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity and a 400 lbs maximum tongue weight.
The reason the Curt hitch item # C39FR is the best option is because it installs behind your rear bumper cover and can be completely hidden when you are not towing.
I have attached a couple of pictures... view full answer...
You are correct, the BulletProof website lists different measurements for the # MD206. In fact, this is true for all of their ball mounts. The reason for this is the way they measure which doesn't follow the standard.
Rise is the distance from the top of the shank to the top of the ball platform when the ball mount is oriented for greater coupler height. Drop is the distance from the top of the shank to the top of the ball platform when the ball mount is oriented for lower coupler height.... view full answer...
You'll be pleased to hear the base of the:
-Malone Crossbar Conversion Kit for Standard Utility Trailer # MPG475 measures 32" before the bar starts to curve upwards.
I have also attached an image showing this measurement for you to check out. view full answer...
Yes, it is! To add a 2" hitch to your 2024 Cadillac XT4, I recommend the Curt Trailer Hitch item # C39FR. This hitch is custom fit and bolts to your Caddy with included hardware. I really like this hitch because it installs behind your rear bumper cover and can be completely hidden when you are not towing.
I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like once installed.
If you are planning on towing you will also need... view full answer...
The flat portion of the top of this Aluminum Tread Plate Trailer Fender # HP49VR that you referenced is 13 inches, the entire top of the fender is 16 inches. Check out the picture I attached to see this measurement.
As long as you used plenty of bolts to securely install this fender to your trailer there is no reason you could not bolt it to your trailer instead of welding it. view full answer...
I checked with Roadmaster and Blue Ox and neither recommended putting in a charge line like item # RM-156-25 when flat towing your 2016 Cadillac SRX. However, I took a look at your owner's manual and it says you have to keep your battery connected. This has been known to drain batteries so it wouldn't hurt to install a charge line if you run into a dead battery down the road or just want to be extra cautious.
If you have any additional questions feel free to email me directly.
To flat... view full answer...
To install a 7-Way harness on your 2024 Cadillac XT4 you will need two separate wiring harnesses because they don't make just one that'll do the job.
The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C44FR. This custom-fit T-connector plugs into your Cadillac's wiring harness, which is located behind the center of the rear bumper. This will provide you with a 4-flat connector.
The second harness you will need is the Universal Installation Kit for Trailer... view full answer...
It sounds like you are just looking for the length of the arms on the Blue Ox Alpha Tow Bar # BX7380.
They measure 39 inches when retracted and 48-3/4 inches when extended. This tow bar will fit Blue Ox base plates that measure between 16" and 36" apart on center.
I have added a link to a video review of this bar for you to check out as well. view full answer...
The Demco Kar Kaddy SS Tow Dolly # DM9713045 will ship freight with a weight of 795 lbs. It will come in 1 box with the main components of the Kar Kaddy SS pre-assembled for fast setup. The heaviest part within will be the main frame with the axle assembly.
According to Demco, the frame/axle assembly weights approximately 350 lbs. As for the other large parts, the tongue is approximately 125 lbs and the wheels, tires, and ramps will be around 175 lbs. view full answer...
Congrats on the new vehicle! To add a Yakima roof rack to your 2024 Cadillac XT4 with flush rails you will need the following parts:
Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 item # Y00421 or item # Y00428 for silver crossbars
SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails - Qty 4 item # Y53TR
Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245
I recommend adding the Yakima Same Key System item # Y07204 to help prevent... view full answer...
The cross tube of the # C13002 Curt Class III Receiver hitch is constructed of rectangular tubing that is 2-1/2 by 1-1/2. Looking at the front face of the cross tube, the tubing would be 1-1/2 inches tall and 2-1/2 inches deep, so the # 18159 would work for you. view full answer...
I checked the specs noted in the online owner's manual for the 2007 Cadillac Escalade and on page 378 it does indicate a maximum trailer weight of 8100-lbs for the Escalade AWD with 6.2L engine and 3.42 rear axle ratio.
If the trailer has a dry weight of 6000-lbs then it is quite likely that by the time you fill the propane tanks, water tanks, load your food, supplies and recreational gear you could have an actual loaded trailer weight much closer to your Escalade's limit.
There is a... view full answer...
The etrailer Trailer Hitch # e62AR and the Curt Trailer Hitch # C13285 for your 2017 Cadillac XT5 are rated for capacity based only on the hitch, not the vehicle. You will be limited by the vehicle capacity, and not the capacity of the hitch. In this case, using either hitch with that large a trailer weight would void your warranty on the vehicle, but not the individual hitches. view full answer...
The final authority for tow capacities on a vehicle will be the owners manual.
From the research I did on your 2014 Cadillac SRX it looks like the max trailer weight you would want to tow with would be 2,500 lbs. You will still want to confirm this with your owners manual though.
If you need a hitch I would recommend the Draw Tite Hitch part # 75682. Our customers have rated this hitch highly. I attached an install video for this hitch for you to check out also.
To complete your towing... view full answer...
I have a set that will work, however your 2018 Cadillac Escalade's owners manual says not to use tire chains because of clearance issues on the inner part of the tires.
To avoid damaging brake lines and suspension pieces on the inside of your Escalade's wheel wells you'll need to use the Konig K-Summit Tire Chains item # KON84FR. The reason you can get away with using these is because they have a unique design where they mount on your tires using one of the lug nuts for the wheel. This... view full answer...
I looked at an online copy of the owner's manual for your 2011 Cadillac CTS and it states that your car can tow no more than 1,000 pounds. You should check your owner's manual to verify this.
The Curt Trailer Hitch Receiver # C11196 has a maximum towing capacity of 2,000 pounds however this will not increase the capacity of your Cadillac. You are limited by the lowest rated factor which in this case is the car.
If you're going to use the hitch to carry anything other than a trailer... view full answer...
Malone tends to recommend their bars a little longer than normal, primarily because Malone deals a lot in watercraft carriers and they often require additional crossbar spread to use correctly and clear the sides. The 58 inch long Malone AirFlow2, part # MPG216 is sized the way it is so that it properly fits your roof rack spread. The installation instructions and recommended locations tend to put them well out of the way of anyone's heads while getting out of the vehicle.
I've included... view full answer...
The final authority will be the owner's manual of your 2005 Cadillac STS, but from the research I did it looks like the max towing weight for your vehicle would be 1,000 lbs. The Curt hitch part # C11307 has a 2,000 lb capacity, but a towing setup is only as strong as the weakest component so you would be limited to 1,000 lbs regardless of what hitch you use.
For trailer wiring you would want the part # C59496, ball mount part # C45522, pin and clip part # F-4, 1-7/8 ball part # C40001,... view full answer...
I went ahead and checked out the:
-Draw-Tite Max-Frame Trailer Hitch Receiver # 76266, and was able to find a hitch height of 18".
Additionally, if you need help finding the correct rise/drop for your application, I'd be happy to assist.
All you're going to need to do is measure the distance from the ground to the top of the receiver, then from the ground the bottom of the trailer coupler, and subtract the two measurements. The difference is the rise/drop you need.
For instance, if... view full answer...
Go To Results