To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts:
Redarc Tow-Pro Liberty Brake Controller item # RED24FR
Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED99FR
Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-002
You don't need a mounting bracket to mount the main control unit. It comes with slots in the sides for zip tying it some where convenient. It weighs... view full answer...
The Draw-Tite item # DT73QR installs below the bumper. This hitch is perpetually backordered due to Draw-Tite being bought out so I have a way better option for a hitch for your 2023 Lexus RX 350. I recommend the Curt Trailer Hitch item # C29VV. This hitch is custom fit and bolts to your Lexus with included hardware.
I really like this hitch because the crosstube mounts behind your rear bumper leaving only the 2" receiver visible. This not only looks better it also helps with ground clearance.... view full answer...
I just went out to the warehouse and measured the Curt Trailer Hitch Receiver item # C15845. I have attached a couple of diagrams with the dimensions of this hitch on them.
From the center of the back bolt to the front of the receiver is 26"
The crossbeam is 4" X 4"
From the center of the back bolt to the crossbeam is 18" rear 22" front view full answer...
The Replacement Step Pad for Aries 3" Wide Oval Nerf Bars # AA86FR measures 6.496” apart center-to-center for the inner pins, and the two outer pins measuring 17.795” apart center-to-center.
It's not uncommon for replacement pads to fit from one brand of nerf bars to the next, but we unfortunately don't have a list to show if there are any cross-reference fitments. view full answer...
To add a 2" hitch to your 2023 Honda Pilot, I recommend the etrailer Hitch item # e27KR. This hitch is custom fit and bolts to your Pilot with included hardware. This is a class III hitch with a 2" receiver. It has a maximum tongue weight of 900 lbs so you will have no issues with capacity.
I have linked an installation video below.
Please note that the hitch fits with a mini spare tire stored under your Pilot, but does not fit with a full size spare. Also, the hitch may interfere with... view full answer...
The overall width of the Buyers Products Class 4 Service Body Long Hitch Receiver # 3371801055 that you referenced 44-1/2 inches. I attached a picture that has that dimension and a few others listed as well. view full answer...
For a 2024 Chevrolet Silverado 3500 with a diesel engine you will want the EcoHitch Hidden Front Mount Trailer Hitch item # EH57FR. This hitch is custom fit and bolts to your Silverado with included hardware. It has been confirmed to fit all models of the 2024 Silverado 3500 including the ones with a diesel engine.
I have linked an installation video below to help you get this hitch set up.
The Curt Front Mount Trailer Hitch item # C52NR you were looking at fits the 2024 Chevy Silverado... view full answer...
Yes, it does! The Curt Hitch item # C92WR has been confirmed to fit the 2024 Volvo XC60 Recharge. This hitch is custom fit and bolts to your Volvo with included hardware. It is a class III hitch with a 2" receiver so it will work with almost every bike rack on the market.
I really like the Curt Hitch item # C92WR because the crosstube mounts behind your rear bumper cover leaving only the 2" receiver visible. This not only helps with ground clearance but it also looks better.
I have... view full answer...
The Malone EcoLight Sport Trailers like item # MAL43FR have 8" tires with a 5 on 4-1/2 lug pattern. The Kenda 205/65-10 Bias Trailer Tire with 10" Galvanized Wheel item # AM3H490 would work as a replacement but you will most likely have to remove or adjust the mounting of your fenders to give you clearance.
The outer diameter of the Kenda tires will be 4-1/4" larger than the stock 4.80/4.00-8" tires that come with the EcoLight trailers.
The Kenda 205/65-10 Bias Trailer Tire item # AM3H490... view full answer...
By 'drawing', I'm assuming you're needing the bolt hole spacing, is that correct?
Lippert won't provide a build sheet, because that's considered proprietary information, but I've provided a diagram showing the bolt hole spacing. The bolt hole spacing dimensions provided are measured center to center. I hope that'll be helpful for you. view full answer...
To add a in-bed 7-way to your 2024 Chevy Silverado 2500 to make towing with a 5th wheel easier, I recommend adding the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long item # C58FV. This harness puts a 4-way and 7-way connector in the bed of your truck and allows you to keep the one on your bumper. This makes hooking up to your 5th wheel trailer easier and more convenient. view full answer...
I have attached a few photos for you with all the dimensions we have for the Ark Drop Down Corner RV Stabilizer Jacks part # AR34FR. That said, Ark is an Australian company so the measurements are in metric, millimeter to be specific so you may need to do some converting. In order to convert from millimeter to inch, divide by 25.4. For example, 422mm is roughly 16-1/2". view full answer...
The Yakima Replacement Anchor Plate Style-A, Part # Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided.
The Yakima 60-inch Track for Roof Racks, part # Y01135, is a set of two tracks with included hardware. I have indicated below the various measurements of the T-shaped channel within the track. The opening at the top of the track measures 0.45 inches... view full answer...
There are a couple of major differences in the 3rd generation Reese Goosebox item # RP85FR over the prior models. First and foremost it now fits the Lippert Rhino pin box. This pin box is more common now than ever and 5th wheel owners will finally have a gooseneck adapter option that will not void their warranty.
Visually the biggest change will be the removal of the taller wings. Reese has changed the angle of the entire goosebox to remove the deeper drop look to a more streamlined appearance.... view full answer...
It sure does! The etrailer Hitch item # e98912 has been confirmed to fit the 2024 Subaru Crosstrek Wilderness.This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight.
I really like the etrailer hitch item # e98912 because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but it helps with ground... view full answer...
Yes, you can so long as your 2024 GMC Sierra 1500 isn't the AT4, AT4X, or Denali model. The only one available is the Curt Front Mount Hitch item # C22NR. This hitch is custom fit and bolts to your Sierra with included hardware. view full answer...
I was able to obtain from Curt a chart showing key dimensions for their 3-Piece Trailer Hitch # C15511 (and other hitch models) that I linked for you. This shows that for hitch # C15511 the overall front-to-back length is just under 24-inches. The height from the top of the mount down to the top of the receiver tube is 8-inches. view full answer...
You're looking for the Curt Trailer Hitch item # C96NR. This custom fit hitch mounts behind your 2024 Jeep Grand Cherokee's rear bumper cover and can be completely hidden when you're not towing or hauling an accessory.
The Curt Trailer Hitch item # C96NR is a class III hitch with a 7,500 lbs towing capacity and a 750 lbs maximum tongue weight. It bolts to your Jeep with included hardware and does not require any drilling to install.
I have attached a couple of pictures below along with... view full answer...
Go To Results