Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item # LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing cutout.
To swap out a Dometic AC with one of the new Furrion Chill Cube units, you'll have to swap out your air distribution box because anything made before 2025 isn't compatible anymore due to the new R32 refrigerant. Since you have a ducted system you will... view full answer...
Hey Don! Although both fit the 2024 Ford F-350 it is a little more specific. The EcoHitch Hidden Front Mount Trailer Hitch # EH54QR is only designed to fit the F-350 dually while the # EH39CR fits the single rear wheel F-350. Neither will fit if you have the front mounted auxiliary cooler.
What do you plan on using the front hitch for? view full answer...
Hey Scott, thanks for reaching out!
Yes, the Curt Trailer Hitch Receiver # C13397 will fit perfectly fine on your 2025 Honda CR-V Hybrid Sport.
What are you planning on using the hitch receiver for? view full answer...
Hi Rusty; the Dexter # 84546UC3-EZ and etrailer # AKHD-5475-35-K will both fit a 3,500 lb axle but they have different bolt patterns. You already ordered the Dexter in the past so I'm assuming your wheels are 5 on 4-1/2. For the same bolt pattern on an etrailer hub and drum assembly you need the # AKHD-545-35-EZ-K. I'm sure you're also wondering about the price difference. The Dexter name generally carries a higher price while the etrailer hub is our house brand so we are able to keep the... view full answer...
Hey Jordan,
Yep, I went ahead and verified directly with Timbren the Timbren Suspension Enhancement System - Severe Service # TGMRTT35D are indeed a fit for your 2025 Chevy Silverado 2500 ZR2.
That said, the Severe Service kit is designed for trucks that have in-bed campers or are used as work vehicles (like salt spreaders, etc.). So if you have an in-bed camper you keep on this will be great, but if you want the suspension upgrade for things like helping stay level while towing a trailer,... view full answer...
Hey Ronnie,
The crossbeam of the slider base on the B&W Patriot 5th Wheel Trailer Hitch w/ Slider # BWRVK3270 unfortunately sits too low and fights for the same space as the handles/side mounting plates of the Curt Rail Adapter # C88KR (16027) so they would not be compatible together. The Patriot slider unfortunately isn't compatible with any puck-to-rail adapter on the market currently.
You would need to switch to the Companion OEM # BWRVK3775 which would have the correct mounting points... view full answer...
Hey Mark, officially I have to recommend you do not use a vertical bike rack with the Curt hitch part # C33MJ even though you said you'd be at only about half it's tongue weight capacity. The issue is the vertical racks put quite a bit more leverage on the hitch since they hold the bikes so high.
For what it's worth the Draw Tite hitch part # DT67YR that fits your CX-50 does not have this same exclusion so it could be used instead. view full answer...
Hi Derek! The Draw-Tite # DT47YR has not yet been confirmed to fit by Draw-Tite which is why we have it listed that way. It probably will fit since it works with the 2021-2024 models but I can't guarantee it.
One way or another, I would get the TowSmart Trailer Hitch Receiver # TS46VR instead. This has the same 4,500 lb max gross trailer weight rating and 675 lb max tongue weight rating as the Draw-Tite. It also has an extra long receiver to help clear the spare tire on the rear which... view full answer...
Hello Gary, thanks for reaching out. The etrailer Anti-Rattle Hitch Collar # e38FV is only for a 2" receiver. It will not work with the 2-1/2" hitches. We do hope to make a version for a 2-1/2" hitch in the future, but that is a good ways down the line.
If you need an anti-rattle device for a 2-1/2" hitch we do have the Roadmaster Quiet Hitch # RM-062 or the Blue Ox Immobilizer # BX88225. Both are U-bolt style ant-rattle clamps.
just comment below and let me know if you have any questions... view full answer...
Great question, Tex!
You are correct that both the Curt # C92WR and Draw-Tite # 76194 trailer hitch receivers have the same basic design for your 2024 Volvo XC60 Recharge. We actually had the opportunity to install the Curt on a 2024 XC60 so if your XC60 Recharge has the same cutout in the bumper that we show in the video (and I've attached in a photo) then you won't have to trim anything or hammer anything into place.
If the rear bumper on your XC60 Recharge doesn't have the cutout then... view full answer...
Hello Joe, thanks for reaching out. If you were to install a B&W Tunoverball Gooseneck Hitch # BWGNRK1020 you would be able to easily transfer your # BWRVK3400 5th wheel hitch to your new truck.
If your new 2025 GMC 2500 HD comes with the factory puck system in the bed, you will need to buy a new base to fit the puck system. You will be able to re use the head unit from your BWRVK3400 hitch so you can buy just the base and save a bit of money.
If your new GMC is a short bed, use the... view full answer...
Hey Arvon, I checked with Curt and the hitch part # C72ZJ that you referenced fits all models of the 2024 Lincoln Nautilus so it fits yours that has the Jet Package trim and rear kick sensors. view full answer...
Hey Brian, thanks for reaching out!
The Curt Front Hitch Receiver # C31075 fits a 2016 - 2023 Toyota Tacoma. Since you have the 2025 model, you'll need the Curt # C55RJ instead, which is still in the preorder stage and hasn't come out yet officially.
The only other way around this is to have a shop fabricate a front hitch for your Tacoma.
What do you plan on using the front hitch for? view full answer...
You sure can, Evan. The Furrion Chill Cube RV Air Conditioner w Air Distribution Box - Ductless item # FR27TD will fit inside the same 14-1/4" x 14-1/4" cutout that the ducted Furrion item # FR99TD fits.
The systems are set up entirely different so you shouldn't be blowing air into the vents anyways but it wouldn't hurt to put some foam blocks in there.
We also have the Ductless Furrion Chill Cube available in White item # FR59TD.
Why are you wanting to switch to a ductless setup? view full answer...
Hey Jim,
You are right that both of those hitches, # C13382 and # C22MJ, fit a 2025 Crosstrek. Capacity wise these hitches are rated for the same 3,500lb capacity. The main difference comes down to the trim of the vehicle. The # C22MJ is not intended for the wilderness trim of Crosstrek, while the other hitch # C13382 will work on a wilderness trim. Otherwise they are the same type of hitch. I am not sure why they have a change, but one fits the wilderness trim, one does not. If you don't... view full answer...
Brett, the Curt Trailer Hitch Receiver # C94RV fits all models of the 2025 Toyota Camry so it will fit both the FWD and AWD models. view full answer...
A shorter pin box will reduce your turning clearance by bringing your trailer in closer so you don't want to do that. The longest pin box we have that fits a 1621HD bolt pattern is the Curt Air Ride 5th Wheel Pin Box item # LC158778. The center of the king pin sits 27-3/8" from the back mounting bolts and 19-1/2" from the front one.
The issue is that the Curt Air Ride 5th Wheel Pin Box item # LC158778 will not work with the Anderson because it's incompatible with gooseneck adapters. However,... view full answer...
If you can send me the diameter of the spindle where the grease seal sits and the diameter of the hub where the seal is pressed onto I can verify if we have the correct seal.
Currently I do see we carry 2 hubs which use the Inner Bearing # LM67048 and Outer Bearing # LM11949. First is the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR which uses the Seal # 168233. This seal has an inner diameter of 1.688" and outer diameter of 2.332". The other hub is an Agricultural Hub... view full answer...
Hey Todd!
At the lowest setting, the saddle of the Power Mountain Tallboy Off-Road Bottle Jack # PM34FR sits at 14" and the top of the saddle arms are at 15-3/8". I took a photo of it out in our warehouse, and while I wasn't able to get an exact photo at eye level (my camera kept getting out of focus), I took one close to eye level so you can get an idea of the height.
If the saddle sides are too tall, you might be able to slide the bottle jack under your axle at an angle to get it in... view full answer...
Hey Brian, sorry for any confusion but we do have the Curt hitch 13634 you are looking for with the part # C54GJ which is a fit for your 2025 Subaru Crosstrek Wilderness. view full answer...
Go To Results