In order to flat-tow a 2012 - 2014 Honda CR-V with all four wheels on the ground behind a motorhome you are going to need a tow bar, base plate kit, safety cables, tail light wiring harness, supplemental braking system, and possibly a high-low adapter. There may also be a few other smaller components that are needed depending on the options the vehicle is equipped with.
For a tow bar, I recommend the Roadmaster Nighthawk All Terrain Tow Bar part # RM-676. The Nighthawk is one of the best... view full answer...
While the # L68149 most likely corresponds to the inner bearing number of your hubs. If this is the case, you have either a 3.5k or a 4.4k axle.
In order to know absolutely sure, you need to know the corresponding outer bearing number or the inner and outer diameter of the grease seal. You most likely need to wipe away the grease in order to reveal the outer bearing number. In order to accomplish this, I recommend using calipers like the 4" Carbon Fiber Digital Caliper # PTW80157.
I... view full answer...
The Redarc Tow-Pro Liberty # RED24FR is the way to go over the Elite # RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed whereas the Liberty gives you just the proportional setting which is what you'd want to use with your towing setup. Proportional controllers sense how hard you are applying the vehicle brakes whereas time delayed means it puts a preset amount... view full answer...
Hey Tony,
Definitely smart to verify the right kit for your 2024 Toyota 4Runner, and I'll go ahead and list out exactly what you need:
- Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness # RED82CR
This comes with the controller, wiring harness, and even the mounting panel for the control knob of the unit, so you're all set. view full answer...
Yes, it will but you'll need a minimum of 2" between the edge of your hitch receiver and the back of the ball mount face. The etrailer Anti-Rattle Hitch Collar item # e38FV extends out 3/4" from the edge of your hitch receiver, this includes the allen screws. The collar on the Rock Tamers item # ERT00108 attaches to the ball mount and is 1" wide.
What you'll want to do is insert your ball mount without the Rock Tamers or a hitch collar installed and measure from the edge of the receiver... view full answer...
Yes, David you are correct. The Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness item # RED82CR is exactly what you need. Since your 2024 Toyota 4Runner came with a 7-way connector, the plug and play adapter included with item # RED82CR will allow you to have an easy install. view full answer...
It looks like we have everything you would need except for one of the washers (washer 951061312). I have listed the parts out below.
TK1 Base - Part # 753-2149
Cover -- Part # 853-7084
M6 x 17 mm Bolt -- Part # 924-0617-15
M6 Washer - Part # 951061254
Track Nut - Part # 853-2106
Washer for TK1/Tracker II - Part 951-0613-12 (the washer we do not have) view full answer...
The Curt Front Hitch # C31076 will install on the front driver and passenger side frame rails. I have linked a picture showing the bolt holes on the passenger side frame rail and it will be the same for the driver's side.
I checked and the Curt # C31076 front hitch is a confirmed fit for your 2016 Toyota 4Runner Trail Edition. I have linked the installation instructions to this page for you to check out.
I have linked the front hitch to this page for your purchasing convenience. view full answer...
Thanks for reaching out, Bradley!
Here are the parts I recommend to get your 2020 Rockwood GeoPro 19FD off-road ready:
- Torflex Lift Kit # K71-707-01
- Tire and Wheel Combo # LH52FR OR # TA75RR (for a more cost-effective option)
- TPMS Color Monitor # TST-507-D-C, Internal Wheel Sensors # TST-507-INT-S1 (need 1 per wheel), and Signal Booster # TST-507-R
Let me know if you have any questions! view full answer...
Hey Alejandro, welcome back! The Hollywood Racks Destination Bike Rack for 4 Bikes item # HR4000 weighs only 42 lbs and has a 35 lbs per bike capacity.
The Destination Bike Rack for 4 Bikes item # HR4000 is going to attach to a 2" receiver. This being a 4 bike capable bike rack means it's going to be a bit bulky and difficult to get into the hitch by yourself. More because of the size of the bike rack than the weight.
What really helps with bike racks is using the etrailer Hitch Pin... view full answer...
I spoke with my technical contact at Titan and showed him the photo that you sent in of your actuator. My contact confirmed that you actuator is a Model 60. The right replacement master cylinder for you will depend on what kind of brakes the actuator is designed for. If the brakes have never been changed out, you can determine this by checking if the trailer has disc or drum brakes.
If your actuator is designed for drum brakes, you will want the Replacement Master Cylinder Assembly #... view full answer...
You will still need a solar controller when using the 7-Pin Trailer Adapter for Go Power Portable Solar Kits # 34270357.
So it won't replace a solar controller it will actually plug right into it (via your 7-way) when using a portable solar panel like the Go Power Portable Solar Panel with Digital Solar Controller - 130 Watt Solar Panel # 34282730 or 200 Watt Solar Panel # 34282610. view full answer...
Hey Grant! Thanks for all the kind words, we're happy to have you!
I absolutely recommend picking up the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-007. This was designed specifically for those extra knockout panels in your Toyota 4Runner.
We had a customer send in a picture of it installed on a 2020 4Runner that I have attached below. This will save you time installing the item # RED82CR as well.
If you have any additional questions or... view full answer...
The Malone DownLoader Kayak Roof Rack w/ Lift Assist and Tie-Downs # MPG114MD-351XL is our only option for a J-style with the load assist. I can tell you we were able to use this on a 2015 4Runner which you can see in the video below but I don't have any information on a lift or the tire size. The load assist is 98-1/4" tall when retracted so you can use that measurement to get a good idea if it will work for your vehicle. You may also want to check out the Thule Hullavator Pro # TH898.... view full answer...
I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine... view full answer...
I just spoke with my contact at Timbren who said that if you are towing your trailer dry right now at the 1,300 lbs then that is why it is a little rough. Since the Timbren Axle-Less Trailer Suspension System # ASR1THDS03 is rated for 2,200 lbs you need to put more weight in your trailer. Once you have some more load in your trailer you will start to experience the performance of the AEON progressive-rate main springs. view full answer...
The trailer hitch that I recommend for a 2020 Ford Ranger is the Curt Trailer Hitch Receiver part # C13417 which is a custom bolt-on fit that does not require any cutting or drilling. The process should actually only take you around 20 to 40 minutes. I have attached an install photo for you as well.
For a trailer wiring harness, the T-One Vehicle Wiring Harness part # 22124 is your best option as it does not require any splicing therefore is almost entirely plug and play. I also recommend... view full answer...
No, you do not if you have the stock coil springs. The Air Lift 1000 Air Helper Springs for Coil Springs item # AL94VJ will fit right inside the coil springs on your 2018 Toyota 4Runner. view full answer...
Hey Matt, we have the pewag Brenta C tire chains # PWXMR82V which are a fit for your tire size 265/70R17 and would provide great traction in snow and mud. These are also a little easier to install as well. view full answer...
Hey Bryan,
I can definitely understand your concern, though your trailer frame won't be damaged or otherwise put under undue stress by adding the Fulton Fold-Away Coupler Hinge Kit for 2" x 3" Trailer Tongue # FHDPB230101.
That's assuming, of course, that you are within the Gross Trailer Weight Rating (GTWR) guidelines of the # FHDPB230101. Your physics memory is spot on, as the further back the more force, though that's the reason for the GTWR based on pivot length. And personally, I... view full answer...
Go To Results