The Prodigy RF brake controller # TK94FR does receive power from the 12 volt circuit in the trailer connector. But it is not taking anything away from the trailer mounted battery or its charger if equipped.
Think of it like an outlet in your house. You can have several things plugged into the same outlet and all of them will work (unless you REALLY overload it!). It is the same principle at work with the 12 volt circuit. Trailer mounted battery chargers and the charge required by the... view full answer...
Hey, Ben.
The Tekonsha 307200 harness is confirmed to fit your 2022 Porsche Cayenne with the factory tow package.
While we no longer carry Tekonsha products, including the P3, we do offer a fully plug-and-play option that works great on your Cayenne, the Curt Echo Wireless Brake Controller #C51180.
The Echo plugs directly into your factory 7-way at the rear of the vehicle, and your trailer then plugs into the Echo. It connects to your smartphone via Bluetooth using Curt’s free app,... view full answer...
Yes, the Curt Trailer Hitch Receiver part # C13116 has been tested and is a confirmed fit for your 2018 Porsche Cayenne E-Hybrid. This is a Class III hitch with a 2" receiver tube opening. It is made in the U.S.A. and comes with a lifetime warranty.
The installation of this hitch is also very straightforward. The rear bumper will need to be temporarily removed for installation but there will not be any drilling required. This makes for a very concealed look as you can see in the attached... view full answer...
Hey Michael, we don't have any custom fit hitches for your 2018 Porsche Panamera Hybrid but we do have a universal hitch like the Adjustable Width Trailer Hitch Receiver for RVs # C13702.
This hitch will fit frames ranging from 18" to 51" wide, has a class III receiver, and a 5,000 lb weight capacity so it'll be plenty big to haul your bike rack and bikes.
As for an installer goes, I'd suggest using our 'Installer Locator' tool which I've attached to this answer page and enter your ZIP.... view full answer...
What we have found is that sometimes when installing the Prodigy P3 # 90195 on a 2005-Current Porsche Cayenne there are times when the display of the P3 may become erratic. We recommend installing a 12V normally open relay to fix this issue. You don't necessarily have to install the relay, but it will help to prevent the screen on your P3 from doing goofy things.
Unfortunately we do not yet have a video of the relay being installed, but I have attached a helpful article and some pictures... view full answer...
Hi Jose; the Diode Dynamics C1 Pod LED Hitch Light # DDY37QB may fit, it really depends on the wiring. If the factory wiring is a 7-way there is a good chance it will work. However, you need to make sure you can remove the wiring connector from the back of the plug since some can't be detached. Assuming you can, it should look like the connector in the picture below. As long as these match up you will be able to use this with your 2020 Porsche Cayenne. view full answer...
Hey William. I have a solution for you but there isn't a simple adapter like item # 20142 in 7-way round configuration. Instead you will need to install the Load Resistor Kit for LED Turn Signals item # DI34ZR on all of the taillight circuits of your trailer that have LEDs. LED lights don't draw as much power as incandescent lights so a resistor is added to increase the amperage draw to resemble incandescent lights.
What kind of trailer are you pulling?
You can add this information,... view full answer...
For your 2016 Porsche Cayenne with a naked roof we have the flush bar Rhino Rack part # RR86MR which is also an aero bar rack but the bar does not extend past the feet of the rack. view full answer...
Hi Damon; as far as we know you will still need the relay to install the Prodigy P3 # 90195 on your 2009 Porsche Cayenne. There isn't a wiring harness that can work around this. However, you will not need to assemble your own wiring harness since you can use the # TK22FR for plug and play. Follow the instructions below from the tech bulletin to add in the relay. Let me know if you need anything else. view full answer...
I checked with Curt and they do list trailer hitch # C13116 as a fit for all models of the 2016 Porsche Cayenne. The all models would include yours as well. There is no trimming of the rear fascia indicated in the installation details, linked for reference, and the hitch receiver should actually be just below it.
Since you can reuse the hitch that you have all you will need is to replace the hardware (since the hardware is all meant to be torqued down once). For that you will need # RHK.... view full answer...
Thanks for reaching out Scott and we appreciate you choosing etrailer!
First off, the Pebble Flow is one of my favorite RV's released over the past 5 years.
The big thing to keep in mind is the manufacturer’s U.S. rated towing capacity for your Cayenne. While you may see higher ratings in other markets, those don’t always translate directly due to differences in testing standards, cooling, braking, and regulations.
With the Pebble Flow’s 6,800 lb GVWR, you’re getting fairly close to... view full answer...
Yes, we do have the install instructions available for the Stealth hitch part # SH24FRT that you referenced. I attached to this page under the heading "helpful info" for you to check out. This hitch fits the 2016 Porsche Macan GTS. Since you have an S model instead you'd want the # SH84FRT which I've also attached install instructions for. view full answer...
We do not carry a custom towing mirror for your 2015 Porsche Cayenne. However, the universal K-Source Mirrors # KS3990 will likely fit just fine. They're one of the most universal fits we carry.
They'll fit mirrors from 4-1/2 to 11-1/2 inches tall. I've linked a video for you to look at. view full answer...
The best hitch for your 2018 Panamera is the Stealth Hitches Hidden Rack Receiver item # SH59ZR. This hitch will not change the appearance of your Porsche. The only trimming required is beneath the car to one of the gravel shields.
To tow with this hitch you will need the Towing Kit w/ Ball Mount and Trailer Wiring for Stealth Hitches Hidden Rack item # 391CONVA7. This ball mount can be completely removed when you are not towing. It also comes with a 7-way wiring harness. view full answer...
The easiest to install trailer hitch for a 2020 Subaru Outback is the Draw-Tite Max-Frame Trailer Hitch Receiver part # DT73RR becuase it doesn't require you to remove the rear bumper like all other options do with the concealed design. Furthermore, it's a bolt-on fit and you won't have to do any trimming of the rear bumper like you do for other options so little to no modifications are needed.
If you'll be towing a trailer then you will also need the T-One Vehicle Wiring Harness part... view full answer...
I have a solution for you. If you need replacement keys for the Thule EasyFold XT # TH903202, the only way to get the exact replacement you need is by providing the 4-character code on the lock core. If you do not have access to the core, the only other option is to replace the cores completely. For new lock cores, I recommend the Thule One-Key System Cylinders # TH450200. With these cores, you will be able to switch out the old ones and have keys for the new ones. view full answer...
Aloha Philipp,
Happy to get the parts need for your 2015 Porsche Macan so you can tow your Jet Ski trailer
I would go with our etrailer Trailer Hitch Receiver Class III - 2" # e57AR. What I really like about out etrailer hitch is that it comes a nice matte black finish which I think gives it that OEM look.
The Reese Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2" Drop - 7,500 lbs # RP26KR that you were looking at would be a great fit.
I recommend going with a locking hitch pin.... view full answer...
Hey Peter, thanks for reaching out about your Curt Echo # C51180 brake controller!
I'm sorry to hear you're having issues, but I reached out to my contact at Curt and got the following response so I'm posting it here for you to check out the steps:
Remove Bluetooth Profile & Previous app
- Delete the Echo Smart app from your phone
- Navigate to Settings > Connected Devices > Bluetooth and if your Echo shows as saved, select the settings wheel/"i" next to the connection, then Forget/Delete... view full answer...
Hey Gregory! The Rapid Traverse 480R are compatible with the Thule AeroBlade, WingBar Evo, SquareBar Evo, and ProBar load bars. Just make sure they aren't the 480 which were only compatible with the old square bars. Thule recommends the 53" bars for your 2017 Porsche Cayenne so I would get the Thule WingBar Evo Crossbars # TH711420. The WingBar Evo is going to be the quietest of the bunch and also looks the best in my opinion. If you need anything else don't hesitate to reach out in the... view full answer...
Hey KC,
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75940 is the only confirmed fit we currently offer for a 2020 Porsche Macan GTS. To transfer your light signals to a trailer you'll need a 4-pole wire harness. The only option we currently offer that's confirmed to fit would be the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT.
From there you'll need to measure the height of the trailer's coupler while the trailer is leveled and the height of your Macan's trailer hitch... view full answer...
Go To Results