Compatibility of Curt Wireless Brake Controller with 2013 Porsche Cayenne Diesel

Published 02/28/2019

Products Featured in This Question

Curt Echo Wireless Brake Controller - 7-Way Plug-in w/ Bluetooth App - Up to 2 Axles - Proportional

(1769)

$279.95

7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires

(337)

$96.74

Question:

Thanks for the reply. Some have said that the 7 pin plug has to be activated by a Porsche dealer, do you know anything about that? Also I assume the Curt plugs into the same socket that I use now for an adapter, that adapter has a 4 plug connection for trailer lights, is it correct that the Curt replaces that 4 pin adapter?

asked by: Bruce B

Expert Reply:

The factory tow package on your 2013 Porsche Cayenne Diesel will have the 7-way you need for the Curt Echo Mobile Trailer Brake Controller - Wireless # C51180. This brake controller will simply plug into your Cayenne and then the trailer will connect the controller. This brake controller will utilize Bluetooth connection to utilize a mobile app on a smart phone or tablet for settings and brake controller manual override function. If for some reason the mobile device loses power and becomes disconnected, the trailer brakes will still function based on the last setting used so you will not lose trailer braking.

I've attached a couple videos to further assist.

expert reply by: Jason S

Bruce

2/28/2019

Jason S.

2/28/2019

Since you only have a factory 4-way, you will need to install a 7-way. There is not a plug and play 7-way for your vehicle from any of our manufacturers, so I recommend installing the # ETBC7L which will plug into your 4-way and then draw power directly from your trailer battery, so you will run a wire with an in-line circuit breaker. No dealer activation is necessary for this. I've attached a video to assist. This will work perfectly with the Curt Echo Wireless system # C51180. The installation video of the Traverse attached will be very similar to your application to assist.