Hi Angela; you will run air ducting (not included) off of the openings on the side of the Coleman-Mach Underbunk RV AC # CM62RR. I recommend getting the All-In-One kit # CM82RR which includes all of the accessories you need for installation. The unit will install in the floor and does require some cutouts. I went ahead and attached some pictures below from the installation instructions for your reference.
Where will you be installing the AC? view full answer...
Hey Jarrod, the 420 model isn't available just yet.
We haven't received a estimated release date for that Dometic model.
If you are interested in a comparable option or needing something sooner, the Dometic 410 # DMC44JF is what most of our neighbors are purchasing. The 410 and 420 will have the gravity flush with full-bowl rinse. The difference is the 420 is a larger, residential-style toilet with an elongated seat for more comfort.
What features matter most to you; seat shape, seat... view full answer...
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item # PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I recommend going up to the 12-ton rated Power Mountain item # PM94FR. The cost increase will give you some peace of mind knowing the jack isn't going to fail on the side of the road when you need it the most.
These jacks are designed for lifted or heavy... view full answer...
Hey Kelly. The Lippert 2" Accessory Receiver Hitch for Up to 66" RV Frames item # LC78DX does not come with installation hardware. I checked with Lippert and they said that this hitch is intended for use with RVs that are prepped for a hitch, meaning there would already be brackets welded to the frame of the RV.
If you would like a more universal hitch that does come with installation hardware, I recommend the Stromberg Carlson Adjustable Accessory Hitch Receiver item # SC45MR. This hitch... view full answer...
Hi Greg; I wish there was a way for me to know the correct parts for that 2023 Coachmen Catalina but we don't have a way to look it up. The only company that lists their parts like that is Grand Design. If they can get out to their trailer and measure I can help but without those measurements we don't have a way to confirm fitment.
More than likely they either have a 33" wheelbase which would be the CRE3000 # MR87ZR or a 35" wheelbase # MR27ZR. Then for wet bolts and shackle straps they're... view full answer...
Hey Tim, thanks for reaching out!
If you're replacing a GE AC unit, then the GE Appliances Deluxe Plus RV AC # GE64FR will work with your thermostat, but if you're replacing a different brand of AC with this GE, then we'll need to get you a whole kit.
You'll need the kit # GE35ZR if you have a ducted system (like in your house) or the kit # GE72ZR if you have a ductless system.
What AC unit are you replacing? view full answer...
Hi G,
Are you referring to the head cover? If so, we offer the following replacement options:
Drive Heads (right side):
Black - Regal # LC643922
Black - Plain # LC289560
Black - Regal - Speaker # LC731463
Black - Plain - Speaker # LC354185
White - Regal # LC37FR
White - Plain # LC289557
White - Plain - Speaker # LC354181
Idler heads (left side):
Black - Regal # LC643923
Black - Edge # LC37UD
Black - Plain # LC289566
Black - Regal - Speaker # LC731464
Black - Plain - Speaker # LC354189
White... view full answer...
Hey Evan, so we do have a way to get a replacement freeze sensor for your Furrion Chill HE with the part # FR43PR which is an all new controller as the sensor is not available by itself. If you check out the picture I attached you can see what the sensor is supposed to look like with the blue clip. It does sound like yours maybe somehow got dislodged from the blue clip and could possibly be hanging out somewhere in the unit. view full answer...
Hey Silver,
To replace your 13,500 Btu Dometic AC, I recommend the Furrion unit for the best overall cooling; you can also choose from either Black or White:
- White: Furrion Chill HE Replacement RV Air Conditioner - 13,500 Btu # FR82PV
- Black: Furrion Chill HE Replacement RV Air Conditioner - 13,500 Btu # FR62PV
No other parts are needed for this, it'll work with your existing setup. view full answer...
Hello Ryan. Your Dexter 5,100 lb axle uses the # 25580 inner bearing and a # LM67048 outer bearing. For a bearing kit, part # BK3-300 is what you need.
The brake assemblies will essentially be the same as the standard 5.2K-7K brakes with the 12x2 brake shoes. So, the # AKEBRK-7-SA that you already ordered will be correct.
Reply below if there is anything else you need. view full answer...
Hey Dj. Not sure what you mean when you say you're missing the gain mechanism. Gain's a setting for adjusting the sensitivity of your trailer's brakes. You adjust gain through your brake controller not the RV. If you're 7-way is functional enough for the Curt Echo item # C51180 then that port will work with a traditional brake controller.
Using a Curt Echo item # C51180 on a RV has had mixed results. It is ok'd to be used on your class A 2017 Coachman Pursuit BH33 but signal issues in... view full answer...
Hey Andy, the trailer wheel and tire part # AM30670 should be inflated to 90 psi when cold under all circumstances and you'll be fine. Unlike on vehicles with trailer tires they need to be inflated to the max psi rating at all times so that you get the full weight capacity and prevent heat buildup which leads to failure. view full answer...
Yes, they have different widths. Each of the Flex guards you mentioned item # LC1346271, item # LC1346281, and item # LC1346291 are 50-1/2" long. However, the width of the single is 6", the double is 12", and the triple is 18". view full answer...
Hey Larry, it sounds like you already have 5th wheel rails, so to be able to tow a Gooseneck trailer you can use the Curt Spyder Gooseneck Trailer Hitch for Fifth Wheel Rails # 16085.
This adapter will drop into standard 5th wheel rails, includes a 2 5/16ball, and will let you tow up to a 25k trailer. If there is anything else you need help with, feel free to leave a comment and I'd be happy to help! view full answer...
I spoke with Lippert and they informed me that you have a Kwikee 25 Series Step therefore the correct replacement motor for you is the Lippert Components Kwikee Step Motor for 25 Series part # LC369506. The part number number you provided of "909509000" was used to reference the above. view full answer...
I do have an option for you, however there is not a replacement motor available for your Lippert model 1817941 Electric A-Frame Trailer Jack.
I recommend simply replacing the jack itself with the Lippert Electric Trailer Jack # LC285318, which is what replaced your existing model. this electric jack features a lift capacity of 3,500 pounds, 2 toggle switches for operation, and a heavy-gauge steel construction that ensures durability and strength.
I have attached a short video demonstration... view full answer...
Hey Roger, for your 2021 Coachmen Freedom Express LTZ Travel Trailer I recommend going with the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers # K71-359-00.
This kit includes (4) 2-1/4" shackle link assemblies with 9/16" x 3-3/8" long wet bolts, (4) 2-1/4" long shackle links, (4) 9/16" x 2-7/8" long wet shoulder bolts, (2) 9/16" x 2-7/8" long shoulder bolts, (8) 9/16" x 1-3/4" bushings, and (14) 7/16"-20 flange nuts. view full answer...
First you will want to check your 2,800lb SumoSprings Solo Custom Helper Springs # SSR-313-54 to determine if 2nd 1" spacer was installed with the springs. If you have both the 1" spacers you will want to remove the 1" spacer which doesn't have the pressed in nut. This will help to reduce how much the spring compresses under a normal load. As the spring is progressive it will reduce how stiff the spring is and help to smooth your ride.
If you are still finding the ride is to harsh you... view full answer...
The Jensen Stereo # JWM60A will replace a Memorex CDR-1000 in your RV. The Jensen system is really nice and definitely worth the upgrade with the ability to use CD/DVD, USB, and Bluetooth. It has 2 video outputs for your DVDs as well.
The cutout for the Memorex from my research is 5" X 8 1/2" and the Jensen is 6" x 9" which is the industry norm so you may need to increase the size of your cutout. I've attached some dimensions to assist, but I don't have all the dimensions of the Memorex... view full answer...
Hey Andrew, welcome back! To replace your Coleman Mach 15,000 Btu AC unit you'll need the Furrion Chill HE Replacement RV Air Conditioner for Coleman Setup item # FR32PV. This is the only compatible 15,000 Btu AC we have left that is going to work with your Coleman Mach air distribution box. It comes with the adapter you'll need too.
Please note that none of the newer units like the Furrion item # FR86TD you were looking at, are compatible with the older models because of the refrigerant... view full answer...
Go To Results