2004 Pontiac Aztek Air Filter

Hello Bernie, Sorry for the delay in receiving an answer, we got quite the spike of questions and are getting caught up. Great news though, it looks like you already got the right one ordered. The Demco Tabless Base Plate Kit - Removable Arms…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hello Ted, Both the #BAK62VR and #BAK34ZR are a fit for the 2024 GMC Sierra 1500, but it comes down to the bed of the Sierra. The #BAK62VR is designed for the Sierra WITHOUT the CarbonPro bed, and the #BAK34ZR is designed for the Sierra WITH the…

Chevy stopped using a port to plug in a brake controller after the 2006 model year. The tow package wires to install a brake controller are still present up under the dash, to the left of the steering column, held together with a white tag. The wires…

Hey Randy! The etrailer Anti-Rattle Hitch Collar item #e38FV does not come in 2-1/2" but I can still make your F-350 happy. A comparable option for a 2-1/2" receiver is the B&W Anti-Rattle Clamp item #BW65FR. This also connects to the…

Hey Jordan, Yep, I went ahead and verified directly with Timbren the Timbren Suspension Enhancement System - Severe Service #TGMRTT35D are indeed a fit for your 2025 Chevy Silverado 2500 ZR2. That said, the Severe Service kit is designed for trucks…

Hey Dan, congrats on the new Tacoma! When you say different, what do you mean exactly? The Gen-Y #GY28XR you're referring to is for 2 1/2" x 2 1/2" hitches so the new Tacoma could have a 2" x 2" hitch, which is why it…

I have attached a drawing from the installation instructions for the rail kit part #C16430-204 you can check out. As you can see in the attached drawing I noted the carriage bolts and where they are located on the rails when installing. Please note…

Hello Gary, thanks for reaching out. The etrailer Anti-Rattle Hitch Collar #e38FV is only for a 2" receiver. It will not work with the 2-1/2" hitches. We do hope to make a version for a 2-1/2" hitch in the future, but that is a good…

The correct replacement for an Atwood Water Heater GC6AA-9E is the Dometic RV Water Heater part #DMC74FR. This is a 6 gallon water heater that works with both gas and electric just like the one you have so it will be an exact match.

Hello Aaron. I have the perfect solution for you, the Gen-Y Hitch Gooseneck Trailer Hitch for GM OEM Puck Systems - 5" Offset - 25,000 lbs #GY55XR. This will bring the ball forward by 5" and should line you up over the axle. After you try…