7-1/2" x 3-5/16". Waterproof, 2-function trailer tail light acts as tail and reverse light. GloLight lens creates a solid panel of light. Surface mount with built-in flange. Accepts industry-standard 3-prong plug.
Features:
Specs:
This white LED light serves as an exterior light for your trailer, RV, or other application. The light gives your RV or trailer a distinctive look that's completely street legal. This Optronics GloLight has a unique solid light pattern when lit, so your lights stand out from the rest. Optronics GloLights are a great way to add both style and value to your RV or trailer.
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
The long-lasting, cool-burning LEDs make this light the perfect replacement for incandescent trailer lighting. LED lights are more efficient, use less power, and last much longer than incandescent lights.
This light has an industry-standard PL-3 connection as pictured above. The light accepts a 3-prong plug (sold separately).
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics Glow Light taillight and reverse light. This waterproof light provides a red taillight, and white reverse light for your trailer. Has the glow light lens that creates a solid circle of light, with a nice smooth appearance. So the outer band glows red, and the inner area is white when you activate the reverse function of the vehicle and trailer.It's a sonically sealed, waterproof housing and lens unit that is submersible. Features durable surface mount technology. When it comes to the construction of the LED circuit board, that better withstands shock and vibration, and allows for improved heat distribution.
Now LEDs make great replacements for incandescent lights. They last longer, they burn brighter, and they're more efficient. With LEDs, you don't have to worry about replacing bulbs, and you don't have to worry about brittle filaments.We're looking a polycarbonate housing and acrylic lens. It's a surface mount installation, with the built in mounting flange. Mounting hardware not included.
And then here on the back, it accepts an industry standard three prong plug, which is sold separately. Taking a look at the overall dimensions real quick, then we'll hook it up to power, so you can see what it looks like with power running to it. Edge to edge going this direction, is about 7-1/2 inches. Edge to edge this direction is about 3-5/16. And then the overall depth, that's back to front, is about 1-1/8 inches deep.The mount holes are separated on center going this direction, by about 2-3/4 inches.
And then going this direction, they're separated on center by about seven inches, maybe 6-15/16 inches, right in that area. Alright we're going to go ahead and hook it up to power, that we can see what it looks like. So you can see here, it sends out a really nice, clear, consistent signal. This is that outer band that's red in color. And then when we activate the reverse function of the trailer, that center area will glow white.That contains a total of 22 diodes, or LEDs, so the multi diode design really helps optimize the overall light output.
Power draw at 12.8 volts, is 0.50 amps. And Optronics puts a lifetime warranty on the LEDs. That's going to do it for today's look at the Glow Light taillight and reverse light from Optronics.
I really like the bright back up lights. It does take a little extra work for the back up lights. - Sorry this pic doesn't show the backup/stop lights but this is the great little chuckwagon we put them on.
The lights are good and standard size, but they seem to have a slightly off plug receptical. I ordered 6 of them and all seemed to be the same. I had to bend my connectors with a pliers a little bit to get them plugged in.
Being used to put back up lights on trailer. Never had back up lights before. Very well made.
Still good
Do you have a question about this Work Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.