Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Chrome

Part Number: TWSPWC

227 Reviews | 34 Questions

In Stock

$79.47

Retail:$123.02

You Save: 35%

Add to cart

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

tow-rax wheel chocks steel 1 chock removable w/ wood screws - 6-1/2 inch wide tires tubular chrome

tow-rax wheel chocks motorcycle steel twspwc

tow-rax wheel chocks motorcycle 1 chock twspwc

tow-rax wheel chocks chock steel removable w/ wood screws - 6-1/2 inch wide tires tubular chrome

Show All (6) Product Images

Show Fewer Product Images

Customer Photos

Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Chrome customer photo

Show All (6) Customer Images

Show Fewer Customer Images

Videos

Tow-Rax Removable Wheel Chock w/ Wood Screws Review

Breaking Down the Tow-Rax Removable Wheel Chock w/ Wood Screws

Show All (2) Videos

Show Fewer Videos

Need help with installation?

Locate installers near me

This sturdy steel chock attaches to your trailer's wood floor to help stabilize your bike. Keyhole slots make it easy to remove the wheel chock for storage. Chrome finish resists corrosion and provides a touch of class. Great Prices for the best wheel chocks from Tow-Rax. Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Chrome part number TWSPWC can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.

All Info
Reviews (227)
Q & A (0)
Related Parts
Photos

Tow-Rax Wheel Chocks - TWSPWC

Features:

Wheel chock helps to stabilize your motorcycle, dirt bike or other small vehicle for transport
- Works with tires up to 6-1/2" wide
Keyhole slots let you easily remove chock to free up space when not in use
Tubular steel construction creates a strong, durable system
Chrome finish is stylish and corrosion resistant
3-Point mounting system - drill only 3 holes into your floor instead of 4
- Mounting screws are included for installing on a wood floor
- Mounting hardware for installing on metal floor (TWSPWFKM) sold separately
- 3/8" Drill bit (sold separately) is required

Specs:

Dimensions: 11-11/16" long x 8-3/8" wide x 8-1/2" tall
Mounting hole dimensions:
- Distance between rear holes: 5-1/2" on center
- Distance between front hole and rear holes: 6-3/4" on center
Weight: 5 lbs
Limited 1-year warranty

SPWC TowRax Chrome Tubular Motorcycle Wheel Chock with 3-Point Mounting System - Wood Screws

4.7

227 reviews

5 Stars		(190)
4 Stars		(19)
3 Stars		(8)
2 Stars		(5)
1 Star		(5)

by: Mike 04/27/2026

The wheel chock came in good condition, but the anchor bolts that secured the removeable plate to the bed of the trailer was not long enough to go threw the plate and the 2x10 board on the trailer. Had to go get different bolts to make it work.

by: Steve B. 10/03/2015

This is a well made and sturdy product as advertised. I installed a pair of these wheel chocks in a 5th wheel toy hauler my wife and I recently purchased. Installation was easy. I liked the idea that the chocks were surface mounted and anchored directly to the floor so that I did not have to go through the under-belly of the trailer to anchor them. With that said, I was not sure how strong or stable these would be compared to Pingel wheel chocks I have used for years in a cargo trailer which had to be secured from underneath. These Tow-Rax chocks worked great. I was impressed by how strong and stable they were. We pulled our trailer and motorcycles through mountain passes and such and these chocks did the job flawlessly. I highly recommend them and I would buy them again. They are also good deal for the money. Other than that, I would like to thank the sales associate at etrailer who managed my purchase. I was kept notified of my order status and when it was shipped. I was made to feel as if etrailer was my neighborhood store down the street. Thank you!

Click to Enlarge

by: Eric 05/12/2023

Have three of these chicks for hauling motorcycles. They were easy to install on a wood floor trailer, tow and weather well.

Click to Enlarge

Eric One Year Later

5/13/2024

Still working out great!

by: Gary 06/01/2023 One Year Later

Used these wheel chocks for a year now and they work great. Made it across the country with these with no worries. These help me make long trips I can’t normally make anymore, due to health reasons. etrailer has helped me keep riding in places I can’t ride to. Made it so easy to trailer to far destinations. Highly recommend these along with great service and prices from etrailer.

Click to Enlarge

by: Robert 07/14/2026

Perfect fit

by: Jason 06/07/2020

Excellent Product. Very prompt delivery- just arrived in time for hauling my KTM to the trails.

Great mounting design and simple to install on my Plywood floor.

Adds just enough stability with my straps.

Removable if you need a clear floor for other uses.

It’s my 3rd purchase from Trailer.com and every time is been a great experience- their videos are very thorough and to the point.

Can’t go wrong with this company.

Click to Enlarge

by: Fred C. 08/27/2020 One Year Later

Great chock, easily installed and easy to remove and store when using trailer for other than motorcycle transport.

Click to Enlarge

by: Duane 11/24/2018

Everything went as smooth as I could ask for the product was excellent and the installation great as the hardware worked as described. I can say enough about it when all was perfect!!!!!

Click to Enlarge

by: Rusty F 12/26/2019 One Year Later

Has given me that extra feeling of security by being able to chock the front wheel when securing the bike on my trailer when I have to transport it and the capability of removing the chock easily when not needed. Highly recommend.

Rusty F. One Year Later

12/27/2020

After using this check now for a year I still highly recommend it.

by: Big Dan 07/06/2016

Excellent product. Fits perfectly. Mounting system works great. Allows for removal easily and use of the trailer without hardware in the way causing an issue.

Big D. One Year Later

7/6/2017

Still great. Been using these chocks for a year now and find it very handy to be able to remove the chock to roll a bike through to the front set - then the chocks right back in place. They are great.

by: Eric 09/13/2023 One Year Later

Excellent removable wheel chocks. Fairly easy to install. I have three of them on an open wood deck trailer and don't really remove them unless I have to. I use them for motorcycles and a large commercial zero-turn mower After a year of being outside, they are doing well and have weathered well! I would highly recommend these wheel chocks!

by: Dennis M 11/12/2016 One Year Later

We have used our wheel chocks extensively for over a year, and they are just like new !! This is a sturdy, durable product that works great, we travel all over with motorcycles secured to these chocks-never had a problem.

by: Donald R. 06/30/2016 One Year Later

I bought a motorcycle trailer with one of these chocks but needed a second one. This was the exact duplicate the dealer installed at half the price.

by: Bill D 04/13/2017 One Year Later

Product is what it is... However it still allowed my HD ultra classic to fall over in my toy hauler. I had to purchase a better one with a wheel lock built in to the wheel chock

by: Jerry S. 08/12/2013

Product was received in good condition and arrived in a short period after ordered. Installed in the bed of my trailer to secure my trike. Very satisfied with the quality and ease of installation, added benefit is the ability to remove and still have a flat floor to transport other items.

by: Pernell H 03/08/2017

I received my product yesterday and everything was as ordered.

Pernell H. One Year Later

3/8/2018

The replacement wheel chock I received is working out very well, no issues.

by: Craig W 08/29/2015

Good, basic wheel chock that I put in my toy hauler for my Harley. I liked that there are no "things" sticking up off the floor. I can un-screw the bolts and remove the chock with nothing to trip over and the threaded inserts are in the floor flush. Other wheel chocks have something sticking up like a bracket or something.

by: Skip H 09/29/2016

Just received my order this morning of the Tow-Rax removable wheel chock.
It is exactly what I wanted and arrived in 2 days. One day earlier than the 3 day shipment I had ordered. I will not be installing it until spring, but wanted to order it now so I would not forget when I wanted to load my trike for travel to our camp in the spring. Thanks for the great service and prompt shipping.

by: Jeff H 05/26/2017

Have not installed yet, but inspected upon arrival. The part seems to be well built and the finish is good. All attaching hardware was included in the shipping box. Which doesn't always occur when ordering on line, so that's a plus. Wide enough to fit around the front tires of all of my HD's. Took only a few days to arrive. Would recommend this product to others.

by: Rob R. 12/09/2014

Good quality and meets expectations. I'm a bit suspect on the strength of the inserts going into chip board, which is the base of my EZ Hauler trailer. I'm not going to leave the safety of my Gold Wing to the pull out strength of these inserts into chip board. I'll have to jury rig something the bolts through underneath. I would like to have seen a mounting feature of greater strength and confidence.

by: Tim 03/03/2015

I made a mistake and ordered two of these but caught it right away. Phoned company and talked with Erika at etrailer she had me fixed up pronto. Just received package and am pleased to say just what I ordered and just what I need for my enclosed trailer that I use for more then my Harley transport. Awesome price, awesome service,couldn't be more pleased I'll search this company again for sure next time I need something they may have. I'll add pics later !

by: Dave 09/09/2021 One Year Later

Works great for both motorcycles, one dirt and one dual sport, installed inside cargo trailer.

by: BRAD HOOVER 06/01/2012

SHIPPING, DELIVERY AND FOLLOW UP PROCESSES YOUR
COMPANY USES. i HAVE NOT HAD A CHANCE TO INSTALL THE ITEMS I RECEIVED BUT THEY LOOK TO BE OF HIGH QUAILITY, PRICE WAS RIGHT ON AS WELL, THANKS SO MUCH

by: Greg 06/03/2016

Bought this to convert a flatbed trailer to haul dirt bikes. Product was everything it claimed to be and more! Highly recommend

by: Pete G 09/03/2016 One Year Later

This is strong and durable. I particularly like how the sleeves mount into the floor of the trailer and agree completely flush when the holder is not mounted

227

true

Show More Reviews

See what our Experts say about this Tow-Rax Wheel Chocks

Do you have a question about this Wheel Chock?

Safely Hauling a 650 lb Motorcycle with a Fleetwood Evolution E2 and Ram 1500
Hi Ken, great question. You won’t be able to safely carry a 650 lb motorcycle on that front deck since it’s only rated for around 150 lbs, so the best and safest way to do this is loading the bike in the truck bed. With your Ram 1500, a setup that will feel stable and controlled is using a properly rated loading ramp like part # FHG73ZR to get the bike into the bed, securing the front wheel in a chock such as the Tow-Rax Removable Wheel Chock part # TWSPWC, and then tying it down with...
view full answer...
Recommended Wheel Chocks for Motorcycle Carrier
I like the Tow-Rax Removable Wheel Chock, # TWSPWM in black and # TWSPWC in chrome. These can be screwed down to a wood floor of a trailer but also bolted down using the included hardware. These are 8-3/8" wide and from specs available to me online, the MotoGroup, ST3402 carrier has tracks 7-1/2" wide, this option will set slightly over the edge the carriers rails. That does not prevent this being used but I think setting within the rails may make a better fit. You would need to fabricate...
view full answer...
How To Set-Up Demco Hijacker 5th Wheel Hitch When Using Rhino Box Pin Box
What I think you are asking is, how to set-up the hitch with the Rhino Box as the narrow width of the pin box does not engage the capture plates on your Demco Hijacker 5th Wheel hitch. What you are missing is the Demco Hijacker Autoslide Locking Plate for Lippert Rhino Pin Boxes, # DM76FR. You need to use this locking plated when using a Lippert Rhino pin box with the Demco hitch.
view full answer...
E-Track Spacing Recommendation for Securing a Harley To a Utility Trailer
If you can get your tie down straps around 45 degrees or slightly higher when securing your Harley you would be setup pretty good. This number is more of a guideline than a rule though. Your best bet would be to mock up everything first and then make sure everything would fit properly. Put your bike in the trailer and then determine where they best place to locate the tracks would be. For D-rings to use with the E-track you would want the part # E59143, for backing plates for installing...
view full answer...
Can a Wheel Chock be Safely Mounted to and Used on a Plywood Floor
Since the floor of the trailer is 1/2 inch thick plywood I recommend mounting the Tow-Rax wheel chock # TWSPWC through the floor and attaching it directly to the frame of the trailer. Or, as an alternative, you could attach a steel backing plate on the other side of the plywood floor and attach the chock to that. This will disperse the weight better. Once you have the chocks secured in one of the manners above and tie down the bikes it will be safe!
view full answer...
Recommended Wheel Chock for Suzuki Burgman Scooters
The 4-3/4 inch wide front tires of your scooters would be perfectly compatible with the Tow-Rax # TWSPWC wheel chock. The chock includes hardware for mounting the chock to a wood floor, for a metal floor you'd need the # TWSPWFKM mounting hardware. If you don't already have them, you'll also need some ratchet straps to hold the scooters in place. Ones set of # 05605 straps per scooter would have plenty to capacity to keep the scooters locked into position.
view full answer...
Motorcycle Wheel Chock in Toy Hauler Recommendation Where Under Trailer Access is Limited
You could use the Tow-Rax Removable Wheel Chock # TWSPWC. You would not need to access the bottom of your trailer to install the install hardware. All you would need to do is drill hole for the anchors of the wheel chock and then you would be able to use the install bolts that thread into the anchors to secure the # TWSPWC. I attached a review video for this product for you to check out as well.
view full answer...
Quick Release Motorcycle Wheel Chock Recommendation
I have a solution for you, but the Wheel Chock MTMWC-01R is designed for permanent install. Instead you might be interested in the # TWSPWC which has slotted install holes so that you can slide the chock backwards and remove it easily when needed. I attached an install video for you to check out as well.
view full answer...
Recommended Removable Wheel Chock for 2016 Indian Vintage Motorcycle
Great news! I found that the width of your 2016 Indian Vintage's front tire is just over 5 inches. This will work great with the removable Tow-Rax Wheel Chocks. Depending on what type of trailer floor you have we off the wood screws with chock in black # TWSPWM or chrome # TWSPWC. We also have a chrome with multi-surface mounting kit for metal or wood floors # TWSPWC3BT. Any of the Tow-Rax Wheel Chocks can use the metal floor hardware kit # TWSPWFKM sold separately. I have linked a...
view full answer...
Tie Down System To Secure A Large Motorcycle For Travel
Tow-Rax Low-Profile Floor Track for Tie-Down Anchors - Aluminum - 6' Long - Machined - Qty 1 # TWSP72TA. This system when using the Tie-Down Anchor for Tow-Rax Low-Profile Floor Track - 1,666 lbs - Qty 1 # TWSPDSTD225 have a working limit of the 1666 lbs listed and a break strength of 5000 lbs. I recommend using a system like this along with something like the Tow-Rax Removable Wheel Chock w/ Wood Screws - 6-1/2" Wide Tires - Tubular Steel - Chrome # TWSPWC. For tie down straps, I...
view full answer...
Need Replacement Mounting Hardware for the Tow-Rax Removable Wheel Chock w/ Wood Screws TWSPWC
The replacement hardware screws that come with the Tow-Rax Removable Wheel Chock w/ Wood Screws, part # TWSPWC, are listed as part # TWSPWFKW. If you need to mount the Tow-Rax Removable Wheel Chock to a metal floor then you will want part # TWPH2770, which includes mounting hardware for both wood and metal flooring.
view full answer...
Capture Plate Kit Needed For A Demco Hijacker And Pin Box Connection
If you're referring to the locking plates that sit on the head of the Demco Hijacker and clamps onto the pin box to lock the head to it then you'll need part # DM6171 if you have a Trailair or Rota-Flex pin box or part # DM76FR if you have a Lippert Rhino pin box. Based on your description of the pin box you most likely have the Lippert Rhino so you'd want to go with the # DM76FR. If it is a Rhino then it will should have Rhino labeled on the sides and possibly also the front.
view full answer...
What do You Recommend for Transporting My 88-Pound E-Bike on a 2018 Subaru Outback?
If you are looking for a way to transport your 88-pound Ariel Rider Grizzly, we do not have a standard bike rack that can accommodate that weight. However, the best and easiest route is to use a dirt bike/moped carrier like the Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp # UF48-979033. This carrier comes with an inside track width of 5 inches wide, so it is plenty of room for your 4-inch wide tires. It also comes with an included ramp to make loading a piece of cake. For a locking...
view full answer...
How To Mount The Tow-Rax Wheel Chock In The Bed Of A Pick Up Truck
To mount the Tow-Rax Removable Wheel Chock # TWSPWC in the bed of your pick up you could use the Mounting Hardware for Tow-Rax Removable Wheel Chock - Multi-Surface # TWPH2770. This would require you to drill into the bed to allow bases and bolts to pass through and mount the wheel chock to the bed.
view full answer...
Types of Motorcycle Wheel Chocks Available
We do have wheel chock for motorcycles. If you have e-track in your trailer the CargoSmart Motorcycle Wheel Chock # 3481731 will snap into the track allowing you to easily remove it when not needed. The Tow-Rax Removable Wheel Chock w/ Wood Screws # TWSPWC is a more basic chock. It includes mounting screws for securing to wood floors used on several utility trailers.
view full answer...
Can etrailer Cargo Carrier for RV Bumper Carry Dirt Bikes
As far as weight capacity goes the 24x84 etrailer Cargo Carrier for RV Bumper # e96ZR has a 500 lb weight capacity so it can handle the bikes, but the thing you're going to have to check is the weight capacity of your bumper as it will likely be less than that. This carrier weighs in at 82 lbs and mounts directly to the bumper so you'll have to subtract the 82 lbs from the weight rating of your bumper so get an accurate rating. When it comes to securing your dirt bikes that is another...
view full answer...
How to Install Tow-Rax Removable Wheel Chock w/ Wood Screws
We don't currently (April 2022) have an installation video of the Tow-Rax Removable Wheel Chock w/ Wood Screws # TWSPWC but the installation process is pretty straightforward. You'll need to use a 3/8" drill bit and drill your holes in your floor either using the attached diagram as a guide or by holding the chock where you'd like it located and making marks through the mounting holes. I recommend going the second route. After the holes are drilled out you'll insert the anchors and secure...
view full answer...
How to Determine Wheel Chock Placement In Toy Hauler to Avoid Hitting Tanks Underneath
You'll either need to have the trailer manufacturer give you a layout of the tanks or you'll need to gain access underneath to physically determine where the tanks are. Aside from that there isn't a special way to determine this that we know of. This is the same case for the Tow-Rax Removable Wheel Chock # TWSPWC and Mounting Hardware # TWPH2770.
view full answer...
Options for Securing Harley-Davidson Motorcycle in Garage of Toy Hauler
The combination of the existing D-rings and the wheel chock that uses the # TWPH2770 mounting hardware for the # TWSPWC sounds as if it'd be an ideal solution for you. Installing the # TWPH2770 would involve drilling holes through the floor of the garage of your toy hauler, but once the mounts were installed, the chock can easily be installed and removed as needed. We don't carry the Condor chocks, but we do offer a some chocks. If you're only planning on carrying the Harley on your Toy...
view full answer...
Will Tow-Rax Mounting Hardware For Wheel Chock Withstand The Weight Of A Harley
Yes, the mounting hardware part # TWSPWFKM is designed to mount Tow-Rax motorcycle chocks like part # TWSPWC onto a metal floor. The hardware is designed to withstand the weight of a motorcycle such as your Harley but I contacted Tow-Rax and they could not give me an official weight rating. I have attached a video for your reference.
view full answer...
Wheel Chock Recommendation to Carry a Honda CRF250L in the Bed of a Truck
Since you want to install a chock in the bed of your truck I recommend something that is easily removable so the bed is clear when you need it to be. For that I recommend using Tow-Rax Removable Wheel Chock # TWSPWC with mounting hardware kit # TWPH2770 for metal floors. I have linked a video review of this chock for you. This does mean you would have to drill through the truck bed. I also recommend using handlebar straps # 06303 in conjunction with ratchet straps such as # EM05729 when...
view full answer...
Availability of Removable Wheel Chock for Dirt Bike
The MaxxTow Adjustable Wheel Chock (DISCONTINUED) MT70075 is not removable but we do have motorcycle/dirt bike wheel chocks that are removable. The Tow-Rax Removable Wheel Chock # TWSPWM in Black or # TWSPWC in Chrome is removable and can accommodate tires that are up to 6-1/2" wide. These come with wood screws but if you have a metal floor then you can use the mounting hardware # TWSPWFKM. All of our adjustable wheel chocks are meant to be mounted permanently so if you are really wanting...
view full answer...
Recommendation for a Removable Wheel Chock
We have TowRax chock # TWSPWM, # TWSPWC, and # TWSPWC3BT. These chocks have a keyhole shape opening where the large end fits around a bolt head. When the bolt is tightened down on the skinny end it cannot be removed. When the hardware is loosened, the chock can be slid back to slip over the bolt head.
view full answer...
Would Tow-Rax Wheel Chocks # TWSPWC Work on a 2003 Harley Superglide
Yes, the Tow-Rax Wheel Chocks # TWSPWC can work on tire widths that are up to 6-1/2 inches wide so yours that is right around 4 inches wide would work perfectly. I attached a review video for this chock for you to check out as well.
view full answer...

< Previous

Next >

Do you have a question about this Wheel Chock?

Info for this part was:

Written by:

Lindsey S

Expert Research:

Michael H

Expert Research:

Jameson C

Updated by:

Adele M

Updated by:

Wilson B

Updated by:

Hannah L

Video Edited:

Dustin K

Installed by:

Cole B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.