See what our Experts say about this Tow-Rax Wheel Chocks

• Installation of Tow-Rax Removable Wheel Chock # TWSPWC3BT on Plywood Floor
  The Tow-Rax Removable Wheel Chock # TWSPWC3BT can be installed on either wood or metal surfaces using the included hardware kit. You will need a drill with 7/16-inch bit for wood floors or a 9/16-inch bit for metal floors as well as a 3/16-inch bit. You will also need 5/16-inch and 3/16-inch Allen keys and a Philips screwdriver. We do not happen to have an installation video for this item but I have included a photo of the mounting hardware with dimensions added to help you determine the...
  view full answer...
  
• Can Motorcycle Wheel Chock Be Installed in Trailer Floor with Mesh Floor
  You'd have to get somewhat creative to install a motorcycle wheel chock like the part # TWSPWC3BT to a mesh floor trailer. Ideally I'd recommend you mount the chock to a piece of plywood and then mount the wood to the mesh floor or remove it each time you use it.
  view full answer...
• What Trailer do You Recommend to Transport My Emojo Caddy E-Trike and Additional E-Bike?
  I have a great transporting solution for you. I did some research on your Emojo Caddy Pro E-Trike, and we unfortunately do not have an option for this trike that will support the 90-pound (with battery) weight and allow you to mount your other e-bike. However, the best option to transport the Emojo Caddy along with your other e-bike is the Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long # K2MMT5X7. The great thing about the Detail K2 Mighty trailer is that you can use the gate...
  view full answer...
• Motorcycle Wheel Chock for Metal Floor Trailer
  The Tow-Rax Removable Wheel Chock # TWSPWC3BT can be installed on metal surfaces using the included hardware kit. You will need a drill with a 9/16-inch bit for metal floors as well as a 3/16-inch bit. You will also need 5/16-inch and 3/16-inch Allen keys and a Philips screwdriver. We do not happen to have an installation video for this item but I have included a photo of the mounting hardware with dimensions added to help you determine the fit for your application. Basically you drill...
  view full answer...
  
• How to Use the Hardware Kit part # TWPH2770 to Install a Wheel Chock
  The Tow-Rax Removable Wheel Chock # TWSPWC3BT can be installed on either wood or metal surfaces using the hardware kit part # TWPH2770. You will need a drill with 7/16-inch bit for wood floors or a 9/16-inch bit for metal floors as well as a 3/16-inch bit. You will also need 5/16-inch and 3/16-inch Allen keys and a Philips screwdriver. We do not happen to have an installation video for this item but I have included a photo of the mounting hardware with dimensions added to help you determine...
  view full answer...
  
• Installing the Tow-Rax Removable Wheel Chock # TWSPWC3BT on an Aluminum Trailer
  The Tow-Rax Removable Wheel Chock # TWSPWC3BT can be installed on metal surfaces using the included hardware kit. You will need a drill with a 9/16-inch bit for metal floors as well as a 3/16-inch bit. You will also need 5/16-inch and 3/16-inch Allen keys and a Philips screwdriver. We do not happen to have an installation video for this item but I have included a photo of the mounting hardware with dimensions added to help you determine the fit for your application. Basically you drill...
  view full answer...
  
• Tire Width Range for Motorcycle Wheel Chocks
  The range of tire width motorcycle wheel chocks we offer ranges are up to 6-1/2 inches like the part # TWSPWC3BT. I attached review videos for both chocks for you to check out as well.
  view full answer...
• How to Carry 2 Vespa 300 Scooters with a 32ft Class C Motor Home
  Your best option for carrying your Vespa 300 scooters with your Class C motor home is to pull a small trailer. We do not have any hitch mounted motorcycle carriers that will allow you to carry both scooters at the same time. We have everything you need to equip a simple cargo trailer for carrying both scooters. A few parts you will want to look into are wheel chocks like part # TWSPWC3BT (1 per scooter), tie down rings like part # RR05, and tie down straps, like # EM31352.
  view full answer...
• What is the Difference Between the Tow Rax Motorcycle Wheel Chocks TWSPWC3BT and TWSPWC
  The difference is the included mounting hardware. The # TWSPWC3BT comes with anchors and hardware to attach to metal or wood floors whereas the part # TWSPWC only comes with wood screws. I attached a review video for both chocks for you to check out as well.
  view full answer...
• Inside Width of Tow-Rax Removable Wheel Chock
  The inside width of the Tow-Rax Removable Wheel Chock part # TWSPWC3BT is 6-1/2".
  view full answer...
  
• Recommended Removable Wheel Chock for 2016 Indian Vintage Motorcycle
  Great news! I found that the width of your 2016 Indian Vintage's front tire is just over 5 inches. This will work great with the removable Tow-Rax Wheel Chocks. Depending on what type of trailer floor you have we off the wood screws with chock in black # TWSPWM or chrome # TWSPWC. We also have a chrome with multi-surface mounting kit for metal or wood floors # TWSPWC3BT. Any of the Tow-Rax Wheel Chocks can use the metal floor hardware kit # TWSPWFKM sold separately. I have linked a...
  view full answer...
• Could Tow Rax Wheel Chock TWSPWC3BT Fit a Harley Davidson
  The Tow Rax Wheel Chocke part # TWSPWC3BT does not have a weight capacity or a bike size limit. It is dependent on how it is mounted. For example if secured to a metal or solid wood floor using the proper fasteners for that material then it could handle a Harley, no problem. With that said the chock will accept tires that are up to 6-1/2 inches wide so nothing larger than that would fit.
  view full answer...
• Wheel Chock Availability for a Honda Goldwing
  It is not possible to say if your Goldwing with brake covers will fit, since the part that comes close to the disc is at an angle. You would have to physically test it.. I have seen pictures of similar Harleys and the tube runs very close to the rotor. The Rack'Em Manufacturing Removable Wheel Chock # RA-17 does not have a weight capacity or a bike size limit. It is dependent on how it is mounted. For example if secured to a metal or solid wood floor using the proper fasteners for that...
  view full answer...
• Recommendation for a Removable Wheel Chock
  We have TowRax chock # TWSPWM, # TWSPWC, and # TWSPWC3BT. These chocks have a keyhole shape opening where the large end fits around a bolt head. When the bolt is tightened down on the skinny end it cannot be removed. When the hardware is loosened, the chock can be slid back to slip over the bolt head.
  view full answer...
• Mounting Hardware For The Tow-Rax Removable Wheel Chock
  Yes, the mounting hardware for the Tow-Rax Removable Wheel Chock w/ Hardware - 6-1/2" Wide Tires - Tubular Steel - Chrome # TWSPWC3BT can be found with part # TWPH2770.
  view full answer...
• Motorcycle Trailer Wheel Chock Recommendation that Can be Used in More than One Trailer
  If you went with the Tow Rax Wheel Chock part # TWSPWC3BT you could use replacement hardware part # TWPH2770 and basically be able to mount a single chock in several trailers. The chock easily removes off of the hardware by sliding backwards and pulling up. You'd just need a set of hardware for each trailer and you'd be set.
  view full answer...
• Mounting Hardware for Tow-Rax Removable Wheel Chock
  Yes, you can use the mounting hardware kit # TWPH2770 with the Tow-Rax removable wheel chock, # TWSPWC. there is also a kit that comes with the chock and the hardware in one part number. It is # TWSPWC3BT. I have included a link to a video on the wheel chock for you.
  view full answer...
• Wheel Chock For Motorcycles on Open Bed Trailer
  What you can do is use wheel chocks and install them directly to the bed of your trailer, and we have an option that will work on either wood or metal trailer beds, and tires up to 6-1/2 inches wide: - Tow-Rax Removable Wheel Chock with Hardware # TWSPWC3BT The # TWSPWC3BT comes with the needed hardware for either surface, and is removable if you want to use your trailer for something other than hauling your bikes.
  view full answer...
• Motorcycle Wheel Chock Recommendation that is Removable
  The mounting hardware included with the MaxxTow adjustable wheel chock, (DISCONTINUED) MT70075, is designed for a permanent installation. However we do have several wheel chocks that are considered removable because of how they mount. We have TowRax chock # TWSPWM, # TWSPWC, and # TWSPWC3BT. These chocks have a keyhole shape opening where the large end fits around a bolt head. When the bolt is tightened down on the skinny end it cannot be removed. When the hardware is loosened, the chock...
  view full answer...
• Trailer Hitch Recommendations for 2014 Toyota Prius
  You'd first want to equip your Prius for towing by installing a trailer hitch. I'd recommend the Draw-Tite Class I trailer hitch, part # 24847. For a trailer wiring harness, use part # C56147. You'll also need a drawbar, part # 3594 and the appropriately sized trailer ball. For a 1-7/8 inch ball, use # 19256 or for a 2 inch ball, use # 19258. Keep in mind that Toyota didn't recommend using certain Prius model years for towing, so you'll want to consult your owner's manual for clarification. Part...
  view full answer...
• How Wide is the Base of the Tow-Rax Wheel Chock # TWSPWC3BT
  The overall width of the Tow-Rax Wheel Chocks # TWSPWC3BT is 8-3/8 inches. I attached a picture that shows this dimension.
  view full answer...
  

Do you have a question about this Wheel Chock?