Video Transcript for Review of Pacbrake Vehicle Suspension - Alpha HD Towing/Load Leveling Kit - PB22RV

Hello everybody, this is Jeff at etrailer.com. Today we'll take a look at the Pacbrake Alpha HD Air Bag Suspension Kit for your rear axle. Has a 5,000 pound load leveling capacity. Now this is a custom fit part. It is designed to fit the 2017 and newer Ford F250, F350, and F450 Super Duty trucks, both two wheel drive and four wheel drive. A couple notes I do wanna mention though, it is compatible with dual rear wheel models without the factory lift blocks, but it will not fit cabin chassis vehicles, and on a custom fit part like this, I do like to recommend for you to go to our website, use the fit guide, put in your year model vehicle, and it'll show if this will work for your application.

Now these airbags are gonna help you stay level, drive steady, and stay in control when you're hauling heavy loads. This kit will include everything I have laid out here on the table. It includes the air springs for the rear axle, both the upper and lower roll plates, the precision laser-cut powder-coated steel mounting brackets, the grade 5 plated hardware, comes with the air lines, with the inflation valves. Right up here, we have the push-to-connect fittings for the air lines to connect to, and it comes with everything else you need for installation and even a set of installation instructions. Now basically, when this trailer is loaded and the bed is full, your truck's gonna need more than just the stock rear springs to stay level and in control.

So these Alpha HD air springs are gonna add up to 5,000 pounds of rear axle support, helping your truck stay steady and secure through every haul. So whether you're pulling a fifth wheel, hauling materials, or towing equipment, this upgrade keeps you from sagging, squatting, and struggling for control. Also, one load isn't like the next. That's why the Pacbrake is gonna give you freedom to adjust your air pressure from five to 100 PSI. So basically, if you need full support for a loaded trailer, just pump it up.

If you're unloaded, heading home, drop the pressure for a smoother ride. So basically, with the simple manual inflation right out of the box, you're gonna get better ride quality and confidence no matter how much you're hauling, and again, you can start with the simple manual inflation and then you can even expand your system later with onboard air or wireless controls. This Alpha HD system is designed to scale with your setup, making future upgrades easy without having to redo your whole foundation. Now I did wanna zoom in. Now these aren't light duty.

This isn't light duty gear. These Alpha HD springs are built with one-inch thick end caps on each end of the spring. They use 20 internal wires in the spring to handle extreme loads without giving in, and our parts are all corrosion-resistant parts. The roll plates right here are for protection of the spring, and the powder-coated brackets ensure the system will hold up through road salt, rain, mud, and even over time. Now, these precision laser-cut brackets we mentioned, the mounting brackets, they are designed to bolt cleanly to your truck's factory mounting points without any welding or drilling your frame, and one thing to mention is these air springs will not increase your vehicle's weight carrying capacity. So you do wanna make sure not to exceed the manufacturer's recommended weight limit. That's gonna do it for a look at the Pacbrake Alpha HD Air Bag Suspension Kit for your rear axle.