bing tracking image
  1. Vehicle Suspension
  2. Monaco
  3. Montclair Motorhome
  4. 2011
  5. Timbren
FITS 2011 Monaco Montclair Motorhome
Timbren Rear Suspension Enhancement System
Timbren

Timbren Rear Suspension Enhancement System

Part Number: TFER35092B
In Stock
$398.07
Retail:$468.32
You Save: $70.25
Vehicle Suspension
Confirmed to Fit
2011 Monaco Montclair Motorhome

25PCS - Ford

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Call etrailer.com at 1-800-940-8924 for expert service. We are your Monaco vehicle suspension experts, and offer a great price. etrailer.com carries a complete line of Timbren products for your Monaco Montclair Motorhome 2011. Timbren Rear Suspension Enhancement System part TFER35092B from Timbren can be ordered online at etrailer.com. Complete vehicle suspension installation instructions and technical support.
  • All Info
  • Reviews (6118)
  • Q & A (0)
  • Photos

2011 Monaco Montclair Motorhome - Timbren Rear Suspension Enhancement System

  • Bump Stops
  • Towing/Load Leveling
  • Timbren
  • Standard Duty
  • Rear Axle Suspension Enhancement
  • Suspension Only

3,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your Monaco Montclair Motorhome. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.


Features:

  • Improves suspension, handling and safety
  • Provides additional support as needed so you always have a smooth, comfortable ride when towing or hauling gear
    • Allows the leaf spring ample movement while cushioning light loads
    • Becomes more rigid as more weight is added
      • Increases stability - providing great performance while hauling heavy loads
      • Reduces vehicle sag
  • Works independently - side-to-side
    • Helps compensate for off-center loads
    • Reduces body roll when swerving and turning corners
  • Acts as shock absorbers, taking the brunt of bumps and rough roads
    • Extends the life of your vehicle's suspension


Specs:

  • Includes 2 Aeon hollow rubber springs, vehicle-specific brackets and hardware for simple installation
    • Replaces axle bump stops on frame
    • No drilling required
  • Capacity: 3,600 lbs
    • Do not exceed the vehicle's weight-carrying capacity
  • Designed to work with a suspension system that is in good working order
  • Limited lifetime warranty - satisfaction guarantee


An example of sag on a vehicle's rear axle under a heavy load

Whether you're hauling heavy loads in your bed or cargo area or you're towing a trailer, you will often see the rear of your vehicle sag while the front end rises. In these cases, the rear axle is handling not only the weight of the cargo, but also more of the vehicle's weight. Because less weight is on the front axle, the front tires are making less contact with the road. Overall handling - traction, steering, and braking - is negatively affected. But the resistance from Timbren's Suspension Enhancement System works with your factory suspension to keep your vehicle level and improve your driving experience.


Diagram of the Timbren spring installed

The Timbren system comes with custom-fit brackets that are bolted onto each frame rail above the rear axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits, 1" above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride that you are used to.


Animation of a standard Timbren rubber spring

Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape increases resistance, stiffening the suspension and keeping your vehicle level.


Timbren suspension system works to prevent body roll

Each hollow rubber spring works independently to support the driver's side or passenger's side of your vehicle. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when you are hauling off-center loads.


An example of a trailers swaying

Because the vehicle handles better with the springs, less turbulence will be passed along to the trailer, and this helps to keep the trailer in line. Your driving comfort is further enhanced if the trailer does begin to sway (from a gust of wind or a passing semi), because the movement from the trailer is not transferred to your vehicle. This also works to make the sway subside more quickly.


An empty truck on a bumpy road without Timbren

Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall when loaded. Wear and tear on the factory suspension is also lessened because the rubber springs work to prevent bottoming out on rough roads.


Timbren Suspension Enhancement Compared to the Competition

Timbren's Suspension Enhancement Systems are much easier to install than air springs - there are no air hoses to run, no compressors or gauges to hook up, and no manual adjustments to make. The rubber construction makes Timbren's springs more elastic than similar products constructed of microcellular urethane. And more elasticity allows for a more comfortable ride when loaded or towing because the rubber has more travel.



FER35092B - Rear Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren

Installation Details TFER35092B Installation instructions

Customer Satisfaction Score:

Ratings & Reviews

4.7

3508 reviews
5 Stars
(2790)
4 Stars
(457)
3 Stars
(113)
2 Stars
(69)
1 Star
(79)
3,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.

by:

What a great product. This has made a night and day difference pulling a 5th wheel.



by:

Easy installation. Good quality.



by:

Very efficient and great to work with. Will definitely use your company again. Thanks



by:

Works pretty well. Does stiffen the factory ride considerably when not hauling a load.



by:

Just as overtired , they stiffened up the ride , plus no more sag in rear ended of truck .



by:

Worked great. My Tahoe no longer says in the rear. Can’t even tell a difference when I hook my trailer up.



by:

Installed in about 15 minutes,very easy.I pick up my new truck camper next week so I do not know how it works yet,but looks like it will work like its suppose too



by:

Fast shipping



by:

Easy install and work well on my 2500 S uburban



by:

Product does not help rear swag with fifth wheel camper but a half inch. On brand new truck as well. Not happy with product. Called to return them and want me to pay 27.00 shipping and stated in email that was sent to me I couldn’t return if installed. I’m not understanding this ? Do not buy ! I won’t be doing any more business with etrailer . Not helpful at all



by:

Shipping was fast, product looks to be well made.



by:

Easy to install and does not affect the ride till you have a load, then they help support the load. Good product!



by:

as expected,fast shipping



by:

I have always had a good experience with doing business with you



by:

Quick service and as described.



by:

Great service and quick shipping



by:

As always amazing customer service and products to match.



by:

I just installed them yesterday. Super easy, took maybe 25 minutes. Looking forward to towing my toyhauler soon.



by:

Very easy installation!



by:

I'm very happy with the fast service. Timbren makes quality parts and now my problems are solved. I get a smooth ride and the truck does not sag . Thank you



by:

Great cost effective way to keep truck level. Easy install! A 15 minute job. Does not affect empty ride quality. Extremely happy with the product and etrailer.com



by:

Fast delivery and easy installation



by:

Showed on time and easy installation. This is why I continue to be a loyal customer.



by:

Great Product, arrived quickly and packaged well.

Will be buying from them in the future.



by:

These are the best add on suspension helpers I have ever had on a pick up. I put 2 yards of compost in the back of my 1/2 ton Silverado W/T long bed and it rode level back to the house. These control sag when you drop on a trailer loaded or not.


25
3508
Show More Reviews

See what our Experts say about this Timbren Vehicle Suspension

  • Helper Springs, Steering Stabilizer, and Anti-Sway Bars for RV Built on 2013 Ford F-350 V10 Chassis
    To start I actually recommend Timbren rear helper springs # TFER35092B because they were specifically designed for RVs built on the 2013 Ford E-350 van chassis, have a lifetime warranty, and cost less than the SumoSpring options. They are rated at 3,600 pounds. For a steering stabilizer use the Roadmaster Reflex steering stabilizer # RM-RBK24-RSSC. For a front anti-sway bar you can use # RM-1139-176 which will replace the factory sway bar. And for the rear you can use # RM-1139-117....
    view full answer...
  • Timbren vs Air Bag Suspension System on 1995 Ford E-350 Chassis for Class C Motorhome
    The Timbren system # TFER35092B would work to reduce sag in the suspension, as would the air bags. However, there are a few differences in how the Timbren systems work as compared to the air bag helper springs. The Timbren systems don't require adjustment, air, or maintenance. They are also easier to install than air springs. The only down side to these is that they can engage on large bumps when the RV is unloaded. This gives you a decent kick because the springs are really firm when...
    view full answer...
  • Recommendation to Reduce Sag on Left Side of Class C Motorhome without Using Air Bags
    To help level out your new RV that's built on the Ford E-350 chassis I recommend taking a look at the Timbren Rear Suspension Enhancement System # TFER35092B. These heavy-duty jounce-style springs will replace the factory bump stops on the rear axle to better support the RV's load and help to bring the left side of the coach up for a more level ride. A jounce-style spring system like this will definitely improve your existing left side sag but there is a chance that it won't lift it up...
    view full answer...
  • Recommended Rear Suspension Enhancement For A 2006 Gulf Stream 5291B On E-450 Chassis
    Hey Gregory thanks for your question. Adding Timbrens to the rear of your 2006 Gulf Stream 5291B Cruiser is definitely going to help reduce suspension sag. The # TFER35092B that you mentioned is only for the E-250 and E-350 models since they are only rated for 3,600 lbs. Since yours is an E-450 we do recommend going with something a bit more heavy duty. My recommendation is the Timbren Rear Suspension Enhancement System # TFERSD, which is rated for 5,600 lbs. This kit is basically intended...
    view full answer...
  • Timbren Suspension Kit for 1995 Jayco Eagle 24 ft Class C
    Since the Timbren kit part # TFER35092B was intended for motorhome chassis like what you have on your 1995 Jayco Eagle 24 that would be the kit to use. The part # TFER35092LB is instead intended for heavier duty cube vans and would be too harsh for your application.
    view full answer...
  • Transmission and Oil Cooler, Rear Helper Springs, and Towing Mirrors for a 2001 Ford E-350
    I have some excellent recommendations that will not only help your 2001 Ford E-350 van last a long time but will also keep you under budget. First, instead of just a transmission cooler, I recommend a combination engine oil and transmission fluid cooler # D15902. This will help both the transmission and engine run cooler which will in turn help get the longest life out of them. I have linked a video showing an example installation for you. For the transmission cooler part of this combination...
    view full answer...
  • Correct Timbren Rear Suspension Enhancement System for 2021 Class C Motorhome on Ford E-350 Chassis
    The correct Timbren Rear Suspension Enhancement System for 2021 Class C Motorhome on Ford E-350 Chassis is part # TFER35092B.
    view full answer...
  • Suspension Kit for Class C Motorhome on 1998 Ford E-350 Van Chassis
    We have a rear-axle helper spring kit you can use on your 1998 E-350-based Class C motorhome to help correct for sag and sway, Timbren's rear jounce spring kit # TFER35092B which fits the 2WD versions. This is a no-drill kit with springs that replace your factory bump stops; a set provides 3600-lb leveling and stabilizing capacity. The instructions are linked to show you what is involved. If you have a 4WD then your option is a rear air bag kit, such as # AL88138 from AirLift and # F2061...
    view full answer...
  • Helper Springs and Transmission Cooler for a 2008 Ford E-250 Van
    The full size Ford vans, especially the 3/4 ton models like your E-250, are made to carry around a lot of weight. And since its towing capacity is 5,900 pounds, towing around a 3,500 pound trailer all the time would not be too much for the vehicle to handle. However, there are some things you can do to make it easier for the van. You can add a transmission cooler because towing will put additional strain on the vehicle transmission. The most popular cooler option is # D13503. Another...
    view full answer...
  • Will Adding Helper Springs Take Care of Worn Suspension on a 2003 Ford E-350 RV Cutaway
    Helper springs and any suspension enhancement product such as # SSA8 are meant to be installed on a vehicle with a factory suspension system that is in good working condition. It sounds like the suspension needs to be replaced on your 2003 Ford E-350 so you would not want to install suspension enhancement until it is replaced. Once it is replaced then adding suspension enhancement will help extend the life of the stock suspension so that you do not run into this issue again. For your RV...
    view full answer...
  • Best Timbren Suspension Enhancement For 2013 Thor Four Winds 22E Motorhome
    To get the best support for the suspension in your 2013 Thor Four Winds 22E motorhome, I recommend going with the higher-rated, 6,000 lb capacity Timbrens: - Timbren Rear Suspension Enhancement System # TFER35092LB Going with the 6k # TFER35092LB ensures your motorhome gets more of a boost to its handling and performance, as they will engage with more support than the lighter Timbrens to counteract body roll and sway better.
    view full answer...
  • Hitch And Towing Components Recommendation For 2003 Ford E-350 Van To Tow 37 Ft Trailer
    You will want to check the owner's manual or with your dealership to make sure you do not exceed the towing capacity for your van. For your 2003 Ford E-350 I recommend the Draw-Tite Ultra Frame Hitch, part # 41906. This is a Class lV hitch and it has a 2 inch receiver opening. The ball mount kit I recommend is the etrailer Ball Mount Kit, part # EBMK2216. This kit includes a ball mount with a 1 inch rise or 2 inch drop, a 2 inch and a 2-5/16 inch trailer ball, the pin and clip, and a...
    view full answer...
  • Will Timbren Suspension Kit Improve Sag on 2019 Ford E-350 Class C Motorhome?
    Hey Bill, thanks for reaching out! The Timbren Rear Suspension Enhancement System # TFER35092B can be used to help fight the sag on your 2019 Ford E-350 Class C motorhome, but I do also recommend checking your OEM suspension as well. If you have your OEM suspension overloaded, then adding something like this will help in the short run, but it won't improve everything in the long run. Do you have your motorhome loaded up to the max GVWR?
    view full answer...
  • Recommended Timbren Suspension Enhancements For A 1992 Fleetwood Jamboree Searcher Class C Motorhome
    Adding in some lighter capacity enhancements can help cushion the ride as well as reduce sag and swaying. For your E-350 chassis you'll need the Timbren Front Suspension Enhancement System # TFEF350 and Timbren Rear Suspension Enhancement System # TFER35092B. These both easily bolt up in the same way as your factory bump stops so it should be a very easily swap out for you.
    view full answer...
  • Rear Suspension Enhancement for a Coachman Camper Van on a 1998 Ford E-250 Van Chassis
    The Firestone kit # F2061 fits 2007 to 2008 Ford E-250 cab and chassis vans and 1992 to 2012 E-350 cab and chassis vans but not a 1998. I spoke with Firestone and they stated that they did not have a confirmed fit for the 1998 E-250 converted into a motor home but we do have an excellent option that will work. Take a look at the Timbren springs # TFER35092B. These springs provide support and will reduce side to side roll and help with bottoming out. They do work independently from side...
    view full answer...
  • Timbren Suspension Enhancement For 1997 Conquest Motorhome on Ford E350 Chassis
    While we do have Timbrens that will work for you, the part number you mentioned is for trailers and not Class C motorhomes. It looks like the 1997 Ford Conquest Class C motorhome was on a Ford E350 chassis, and you'll need to verify that but if so, the correct fit for Timbrens is the following part number: - Timbren Rear Suspension Enhancement System # TFER35092B
    view full answer...
  • Dimensions of Timbren Rear Suspension Enhancement for 2006 Ford E-350
    We were able to get height and width you were looking for of the Timbrens that fit your 2006 Ford E-350, the Rear Suspension Enhancement System # TFER35092B. Including the bracket, the Timbren system is 6 inches tall and 3-7/8 inches wide.
    view full answer...
  • Weight Capacity for the Timbren Vehicle Suspension for the 2011 Ford E Series Van
    The capacity of the Timbren Rear Suspension Enhancement System, # TFER35092B, for Ford E series vans is 3600 pounds total. Suspension enhancement is designed to help your existing suspension handle the loads you require of it, but does not increase the vehicle weight carrying capacity. We have an informative article on the Timbren systems that may be helpful in making your decision. I have a set of rubber springs on my truck and they work great, especially when towing a trailer, and do...
    view full answer...
  • Are There SumoSprings Solo Custom Helper Springs for a 1997 Ford E350 Club Wagon
    The SumoSprings Solo Custom Helper Springs are not offered for a 1997 Ford E350 Club Wagon for the rear but I do have a very similar option in the Timbren Rear Suspension Enhancement System part # TFER35092B. The main difference between the two is that the Timbrens are made of a more dense material so they will provide more support.
    view full answer...
  • Will SuperSprings # SSA13 Fit 1990 Ford Econoline E-350 RV Conversion Van
    We do have rear suspension enhancement kits that do fit your 1990 E-350 cab-and-chassis and these can be seen on the link provided at right. The SuperSprings Custom Suspension Stabilizer and Sway-Control Kit # SSA13 that you referenced does not fit your 1990 Ford E350 Econoline conversion van, although it fits many years of Ford and GM pickups and some GM vans. You do have options for both air bag kits and rubber jounce spring kits. These kits have varied applications, some specifically...
    view full answer...

Do you have a question about this Vehicle Suspension?


Info for this part was:

Employee Robert G
Expert Research:
Robert G
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Mary K
Updated by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Carrie F
Updated by:
Carrie F
Employee Lincoln B
Updated by:
Lincoln B
Employee Jonathan Y
Video by:
Jonathan Y
Employee Robert C
Installed by:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924
<