Timbren Rear Suspension Enhancement System
Item # TGMRG25C
Retail:$316.90
Our Price: $269.36
You Save: $47.54
Confirmed to Fit
2002 GMC Yukon
4 Wheel Drive Models
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (5931)
- Q & A (0)
- Photos
2002 GMC Yukon - Timbren Rear Suspension Enhancement System
- Jounce-Style Springs
- Rear Axle Suspension Enhancement
- Extra Heavy Duty
- Timbren
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your GMC Yukon. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Features:
- Improves suspension, handling and safety
- Provides additional support as needed so you always have a smooth, comfortable ride
- Allows the leaf spring ample movement while cushioning light loads
- Becomes more rigid as more weight is added
- Increases stability - providing great performance while hauling heavy loads
- Reduces vehicle sag
- Works independently - side-to-side
- Helps compensate for off-center loads
- Reduces body roll when swerving and turning corners
- Acts as shock absorbers, taking the brunt of bumps and rough roads
- Extends the life of your vehicle's suspension
Specs:
- Includes 2 Aeon hollow rubber springs, vehicle-specific brackets and hardware for simple installation
- Replaces axle bump stops on frame
- No drilling required
- Capacity: 6,000 lbs
- Do not exceed the vehicle's weight-carrying capacity
- Designed to work with a suspension system that is in good working order
- Limited lifetime warranty - satisfaction guarantee
Whether you're hauling heavy loads in your bed or cargo area or you're towing a trailer, you will often see the rear of your vehicle sag while the front end rises. In these cases, the rear axle is handling not only the weight of the cargo, but also more of the vehicle's weight. Because less weight is on the front axle, the front tires are making less contact with the road. Overall handling - traction, steering, and braking - is negatively affected. But the resistance from Timbren's Suspension Enhancement System works with your factory suspension to keep your vehicle level and improve your driving experience.
The Timbren system comes with custom-fit brackets that are bolted onto each frame rail above the rear axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits, 1" above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride that you are used to.
Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape increases resistance, stiffening the suspension and keeping your vehicle level.
Each hollow rubber spring works independently to support the driver's side or passenger's side of your vehicle. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when you are hauling off-center loads.
Because the vehicle handles better with the springs, less turbulence will be passed along to the trailer, and this helps to keep the trailer in line. Your driving comfort is further enhanced if the trailer does begin to sway (from a gust of wind or a passing semi), because the movement from the trailer is not transferred to your vehicle. This also works to make the sway subside more quickly.
Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on the factory suspension is also lessened because the rubber springs work to prevent bottoming out on rough roads.
Timbren Suspension Enhancement Compared to the Competition
Timbren's Suspension Enhancement Systems are much easier to install than air springs - there are no air hoses to run, no compressors or gauges to hook up, and no manual adjustments to make. The rubber construction makes Timbren's springs more elastic than similar products constructed of microcellular urethane. And more elasticity allows for a more comfortable ride because the rubber has more travel.
GMRG25C - Rear Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren
Installation Details
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Timbren Rear Suspension Enhancement System - TGMRG25C
Average Customer Rating: 4.7 out of 5 stars (5931 Customer Reviews)
6,000-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.by: Francis02/20/2023
very good product ,received just in time and fit perfectly on my GMC savana 2000 .Be sure to clean the two receptacle thats help.
très bon produit , reçu dans les délais et s'ajuste parfaitement . Assurez-vous de nettoyer le receptacle cela facilite l'installation.
by: Leo08/04/2023
The Timbren rear bump stops for 2020 Suburban were great quality and fit perfectly in the replacement of the original ones with no problems. The old ones pulled right out by hand with no hassle. When I installed the new ones I put 2x4 blocks that I cut underneath the bump stops. Then hooked up the 6,400 lbs travel trailer with about 750 lbs of tongue weight on it and they pressed right into place. The Suburban was more stable because it had less swaying while towing. I also gained about 1 inche more in the fender gap which means less rearend saging.
by: Paul 03/10/2024
Chevrolet Suburban
The rear suspension enhancement has made a big difference in towing - I have a 2020 Suburban with the tow package. I have a 5400 pd travel trailer(dry weight) which I assume is around 6400 pds loaded. I noticed a major difference in stability after adding these especially over rough pavement and bridges. The Timbrens have mitigated the rear axle slamming against the frame. I use an Equalizer hitch with the system and added loaded rated tires. The package works great. It’s a big improvement towing.
by: Michael B.08/07/2020
I bought these for my 2001 Chevy Suburban with a 5.3 V8 and four-wheel drive. These Springs have been absolutely amazing, on more than on one occasion I've loaded up three to four thousand pounds in the bed of my truck and the vehicle only sagged 2 in from the unloading height.
The Springs are better than I thought they would be and will absolutely be an addition to every work vehicle from now on.
I highly recommend them.
Michael B.
8/9/2021
springs are holding up well, they still work like new.
by: Samuel06/15/2020
2017 suburban. Easy to install but I used the handle of my floor jack to pry the new rubber into the cup as I wasn’t able to get it to stay by hand. Once started, I lowered onto wood blocks and it popped right in. The pictures show the original stop, installing the the new ones with wood, installed with 1” gap sitting with no external load, and loaded with the weight of my 33’ camper. They definitely help with sagging and a little with stability. It’s still more squirrelly than I like, but that may just be the towing properties of the suburban up against its max gross weight. Definitely recommend if you tow any weight with a suburban.
by: A. Lopez in Texas05/24/2019
Installation was somewhat simple, had to raise the truck and lower quite a few times for it to settle in fully even with the 2x4 and lubrication. I hooked up my loaded trailer and it didnt squat as low as it did. My original bump stops were completely rotted away so I cant wait to try it on the road with these new ones
by: Charles05/31/2021
The difference between the factory bump stop and the Timbren system is phenomenal in both size and composition. The install went as planned per the instructions. Definitely a better ride now when loaded, including a Cargo Carrier on back with a loaded Kong Kooler. Definitely worth the time and effort to upgrade my Suburban!
by: Todd04/14/2020
2003 Suburban z71 4wd rear install. Removal of old bump stop was simple. Passenger Timbren install fairly easy but took some time to get seated fully. Driver side, different story. The harsh angle of the bump stop cup required numerous tries to seat it straight. Install took about 3 hrs in total. In hind sight I should have just pulled the tires. Do they work to reduce sag....100%
by: Nicholas 09/17/2018
2004 Chevrolet Suburban
I have a 2004 Chevrolet Suburban that I intend to use as a replacement for my '99 Chevrolet heavy half ton Suburban. I will use it for my work vehicle as an electrical contractor. The new bump stops are a great solution for me to use my '04 half ton Suburban as a one ton Suburban. They were not as easy to install as the video, but they were not too difficult either.
Nicholas M.
9/18/2019
The Timbren Rear Suspension Enhancement System has worked out wonderfully for my 2004 Suburban. I use the vehicle as a work vehicle. I am an electrical contractor and haul about one ton of tools and supplies in it every day. It handles as if there is nothing in it.
by: David 12/13/2023
Excellent product, made a big difference
by: Luke03/29/2021
Installed on a 05 GMC Yukon. I went to put these in on a Saturday afternoon thinking I could do it in an hour or so. I was wrong. The stock bumper is 1/2 inch thick for the stock catch. The new is 1 inch thick. I used some silicone spray and cleaned the rust off the metal. I used the 2x4s as recommended and they slid right in. When I took the 2x4 out they slid right back out and I couldn't get them to stay in. I called customer service at 3 pm on Saturday and I was on hold for an hour and then hung up. After messing with this for 3 hours by that time I decided to just make it work. I ground notches into the top all the way around the same depth as the old bumper. Slid them in and they stayed. They sit direct on the stop and they do not have a 1 to 1 1/2 inch gap between them. Maybe I need new rear springs. Anyway they reduced body roll greatly ( I did the front at the same time). It rides much stiffer now, like my 01 F250, which is pretty rough. Does not squat with the trailer on though and makes for towing much better. Defiantly reduces sway. I will say this has been my worst experience with etrailer. I have purchased from them many times before but this one was just disappointing.
by: Carlos C.09/18/2017
2017 GMCYukon
I own a 2006 GMC Yukon. We purchased a brand new 2017 32' Keystone Hideout Travel Trailer. The travel trailer remained well within our tow capacity when fully loaded. We also purchased and installed a weight distribution system. With all of these steps in place, the rear of our vehicle would sag. I purchased the Timbren SES Rear Suspension Enhancement System (Model TGMRG25C) from etrailer. The order arrived quickly within a few days. I was able to install myself in about 30 minutes. We just took the travel trailer out this past weekend. From the moment we hitched the trailer on, the difference was remarkable. No rear end sag at all. I would highly recommend this product.
Carlos C.
9/18/2018
A year later and the suspension enhancement system is working flawlessly.
by: Michael05/23/2018
2002 GMC Yukon XL
Size difference shocked me. Towing my wakeboard boat is much easier with less drag on my 02 gmc Denali xl. I have mine lifted 3" and didn't need the spacers even though I bought them. I would recommend this product to anyone who tows and has vehicle drag. My picture says it all.
by: Jmacs5306/17/2017
2005 Chevrolet Suburban
Product went in fairly easy. Taking the spare out provides a lot of room to work in. A medium size flathead screwdriver worked perfect to get the old ones out. I put one in from the bottom underneath and the other from the outside over the tire. Liked that the best. I was able to hold the product with one hand and slowly lower the floor jack with the other.
Haven't given it a good test yet. So far would rate the product as excellent. Would rate etrailer as excellent.
Joe
Jmacs53
6/17/2018
Very happy with the product!! Highly recommend!!
by: Christopher 10/20/2022
Ford Explorer
Added these with a set 9f Monroe sensitive shocks on my express 1500 awd explorer conversion van. The pair has both raised the rear of the van. Stopped the bottoming out, and has a nice dampened feel over harsh bumps that used to bottom out the suspension.
by: Scott 09/05/2022
Installation was simple and I love the way these don't affect my vehicles comfort when it's not loaded. When it's loaded down its not squatting and handles perfectly. I've had Firestone air lift shocks before and won't have them again. You have to keep a minimum of 10 psi in them and it made my truck bounce like a basketball ball when it hit a bump. I highly recommend this product.
by: Dawkins05/31/2021
2001 Chevrolet Suburban
They weren’t too bad to install. On my vehicle, 2001 suburban, they just slide into place, no bolting required. Seating them was a pain, but I got them in. The only thing I noticed is that I do not have clearance between the rubber stops and the axle pad once I put the suburban back on the ground. I haven’t towed yet, but I have notice that the ride is a little stiffer and the handling is much better..no roll. Service and delivery was great. I’ll buy from this company again.
Dawkins
6/1/2022
They have been great. Since there is no gap between the bumpers and the axle pad, our ride is a bit stiff. They really helped the handling while towing.
by: William 09/02/2022
2003 Chevrolet Suburban
My 2003 suburban would bottom out a lot when towing. I didn’t want to do air bags so I tried this. I really needed these as my original bump stops were rotted out and these made all the difference in towing . Great product even after a year of using them .
by: Rob G08/31/2020
2002 Chevrolet Tahoe
I installed these on my 2002 Chevy Tahoe just over a year ago and they are still fantastic. If your truck is banging or feels like a boat going down the road, I highly recommend installing the Timbren system. I did it myself in under an hour and what a difference.
Thank you etrailer!!!.
Rob G.
9/1/2021
Still 5 Stars!!! I run a mobile locksmith business and carry over a 1000 lbs in tools and product and the Timbrens are still working great. My Tahoe rides as smooth as ever!!!
by: Roger09/03/2019
Love the support when I load my car trailer up. Ride with the empty trailer is good also. I have not tried it with the truck without trailer hooked to it. But I am 100% happy with the way it’s supports the rear.
Roger
8/31/2020
Little bit of a ruff ride without my trailer hooked to it but not to bad. Would still recommend to anyone. Supports the trailer 10x better than without.
by: Angelo07/21/2020
Vast improvement when driving on rough roads. My SUV use to bottom out and feel loose. With these it doesn't feel nearly bad and the back end doesn't drop low when loaded.
by: Robert03/30/2022
Chevrolet Silverado 1500
2003 Chevy Avalanche 1500. I put these on a year ago to replace the original ones that were trashed and to upgrade to pull a camp trailer. They are very easy to install and worked well for me, my truck used to squat in the back just pulling a small utility trailer. Now when I hook up to the camper without a weight distribution hitch - No squat and rides nice to
by: Chris H.02/12/2019
2004 Chevrolet Suburban
I replaced the stock bump stops on my 04 Chevy Suburban with the oversized Timbren's. My main objective was to reduce tail wag and rear end sag when towing my 27' camper. I would highly recommend them if you tow on a regular basis. I also drive in the mountains frequently and it has eliminated the tires rubbing the fender wells (body roll) when the road changes camber quickly. The downside is they are somewhat stiff when not under a load which doesn't seem to allow for the full movement of the shock absorber when riding empty. Overall I really like the product when towing and would highly recommend for that application but wish is was not as stiff when not towing.
by: Joe L06/08/2012
2004 Chevrolet Suburban
I put these on a 2004 Suburban K1500 because I use it to pull a JD 990 on a 16' trailer. I also use it to pull a 23' boat.
The originals were still on the truck and had definitely exceeded their life expectancy and the rear end was obviously sagging.
I replaced the P series tires with LT E rated at the same time and there is a substantial improvement in the stance and handling when a trailer is attached.
I recommend these to anyone towing anything with a tongue weight of >500 lbs. Be sure you don't exceed your hitches rating!
A tip for the install: put liquid soap (I used laundry detergent) around the collar and it will slide right in when you lower it down on the 2x4.
by: Bob G12/08/2019
As an trailer employee who owns a truck and a small farm I have had the opportunity to test several different suspension products. I kept the Timbren on my truck for several different reasons. First they are maintenance free. Second they do not affect the unloaded ride of my truck. Third they were the best at handling the heavier loads I tow because of the farm. Finally when towing a trailer or with a heavy load in the bed the body roll is noticeably reduced in the curves on two lane roads.
Mine have been on the truck for several years now and they perform like the day they were installed
25
3596
Show More Reviews
See what our Experts say about this Timbren Vehicle Suspension
- Helper Springs to Level a 2004 Chevy Express Van 4x4I know you mentioned that the sag on your 2004 Chevy Express van is caused by extra weight but since the van has 135,000 miles you will want to inspect the suspension to make sure it is in good shape. Suspension enhancement should only be installed on a vehicle with suspension that is in good working order. With that said, using Timbren helper springs such as # TGMRG25C will definitely help to level out the van and remove the sag. The Timbren springs will engage before the stock suspension...
view full answer... - Does Timbren Suspension Enhancement System Change Ride Height of 1998 Chevy Express VanBecause the use of the Timbren Rear Suspension Enhancement System does not affect the empty ride height of the vehicle, you would be able to see no differences between a before and after installation photo. Once the vehicle is loaded to a certain point, the rubber springs that take the place of the factory bump stops will contact the axle and keep the vehicle from sagging further. The system greatly improves ride quality of loaded vehicles, and also helps reduce body roll that is felt during...
view full answer... - Timbren Rear Suspension Enhancement System 2002 Chevrolet Tahoe with Air Auto LevelThe Timbren kit part # TGMRG25C that you referenced can install on your 2002 Chevy Tahoe that has factory air ride. If you had the police package you'd know for sure as you'd have a spotlight up on the pillar.
view full answer... - Timbren Rear Suspension Enhancement System # TGMRG25C Installation on a 2003 Z71 Avalanche 4WDWhen you install the Timbren Rear Suspension Enhancement System, part # TGMRG25C, onto your 2003 Chevy Avalanche 4WD you will actually remove the original bump stop and install this product in place of it. What keeps this product in the mounting cup is a bolt that runs through the bottom of the # TGMRG25C that goes through the mounting cup securing this product to it. I attached installation instructions for this product for you to check out as well.
view full answer... - Ideal Solution for Stopping Rear Suspension Sag While Towing with a 2005 GMC Yukon XLI have a solution for you, but it's not suspension enhancement for your 2005 GMC Yukon XL. Instead I would recommend a weight distribution system as not only does it help with sagging, but since it reduces the sag by redistributing some of the tongue weight up to the front axle of the trailer you also get increased handling and braking performance. The part # TGMRG25C is a fit though and would give you rear suspension support. The best way to pick out a weight distribution system is to...
view full answer... - Height of the Timbren Rear Suspension Enhancement System # TGMRG25C I went and measured the overall height of the rubber springs of the Timbren Rear Suspension Enhancement System # TGMRG25C and found it to be 6-1/2 inches tall.
view full answer...
- Timbren System Recommendation for 2005 Cadillac EscaladeFor your 2005 Cadillac Escalade the Timbren Kit part # TGMRG25C is a confirmed fit and will provide you with suspension enhancement at the rear of it to reduce the sag you have. These are a fit for your air ride model as well since your vehicle is all wheel drive.
view full answer... - Operation and Durability of Timbren Rear Suspension Enhancement for a 2007 Chevy Express VanDepending on how many springs you are able to add, you may still experience some sag or, on the other side, a very stiff ride. The Timbren Rear Suspension Enhancement System, # TGMRG25C, will prevent sag at the rear of the vehicle just as well if not better than additional leaf springs. This system will also not affect the unloaded ride of the van as additional leaf springs could. When installed, this system has a 6,000 pound capacity. They are made out of durable rubber and should last...
view full answer... - Timbren Suspension Kit Fit for 2002 Cadillac Escalade All Wheel DriveFor your all wheel drive 2002 Cadillac Escalade the part # TGMRG25C is the correct fitting Timbren kit. AWD and 4WD would mean the same thing in the context of what this kit fits.
view full answer... - Suspension Enhancement for a 2005 Chevy Express Van 1500Timbren springs # TGMRG25C and other jounce style springs will work to eliminate the sag of your van when it is loaded. It will also help when towing a trailer though weight distribution is better suited for that application. But since you want something for when towing and when not towing, going with Timbren springs would be the way to go. If the van is sagging when not loaded or towing then the have the suspension inspected first because suspension enhancement should only be used on...
view full answer... - Should Suspension Enhancement and Weight Distribution be Used Together to Tow with 2001 Chevy TahoeSince you are already using weight distribution I would not recommend adding suspension enhancement because the two systems tend to work against each other. But in general, using suspension enhancement like Timbren Springs # TGMRG25C does improve vehicle ride quality, reduces side to side roll, and will help keep the vehicle level when there is a load in the vehicle or when towing. If you are having issues with steering and ride quality it could be that you need to make some adjustments...
view full answer... - Which Timbren Kit Fits 2021 GMC Yukon XL 4WD AT4Yes the Timbren kit part # TGMRG25C that you referenced does fit your 2021 GMC Yukon XL 4WD AT4 as we have confirmed this with Timbren.
view full answer... - How Does the Timbren Rear Suspension Enhancement System Attach?Yes, there is a bolt that goes all the way through that holds the Timbren Rear Suspension Enhancement System item # TGMRG25C in place. I have linked the instructions and an installation video below so you can see the steps involved and all the tools and hardware needed.
view full answer... - How To Prevent a 2009 GMC Savana Van From SaggingYes, the Timbren Rear Suspension Enhancement System part # TGMRG25C which is a fit for a 2009 GMC Savana Van will reduce sag/squat therefore lift the ride height back to normal or if not normal, very close. The Timbren Rear Suspension Enhancement System is actually the most common solution to fix rear sag/squat as they not only work really well but are also easy to install and rather cost effective. If you were to ask me what I recommend, the Timbren Rear Suspension Enhancement System...
view full answer... - What Quantity are Timbren TGMRG25C Helper Springs Available InThe Timbren Rear Suspension Enhancement system, part # TGMRG25C are sold in pairs, Timbren doesn't offer them individually.
view full answer... - Will Timbren TGMRG25C Helper Springs Fit 2005 GMC Yukon XL w/ Factory Air SuspensionThe Timbren # TGMRG25C Aeon Springs would replace the factory bump stops as shown in the provided diagram and video. Because the Aeon Spring is simply a taller version of the factory stop it will work just fine with your current air suspension.
view full answer...
- Recommended Distance Between Timbren Spring and Vehicle AxleTimbren likes to recommend 1 inch between the axle and the Timbren when the truck is unloaded. We have found that this works the best.
view full answer... - How Many Jounce Springs Come in the Timbren Rear Suspension System for 2004 Chevy Avalanche 1500?The Timbren Rear Suspension Enhancement System # TGMRG25C comes with 2 jounce springs for your 2004 Chevy Avalanche 1500. It will give you the upgraded suspension for both sides of your rear axle and each side works independently to compensate for off center loads and reducing body roll around corners. I've attached a couple videos to assist.
view full answer... - Solution For Helping Rear Suspension of 2002 Chevy Suburban that Sags When TowingIf you are experiencing sag while towing I have a better solution than suspension enhancement. Instead I would recommend a weight distribution system because not only does I stop the sag it distributes some of the tongue weight of the trailer up to the front axle of the tow vehicle which allows the handling and braking to improve. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure...
view full answer... - Suspension Enhancement Recommendation for 2004 Cadillac EscaladeIf you removed the OEM suspension on your 2004 Cadillac Escalade then you'll need to find an exact replacement for that. The air bag kits we have are designed to help an OEM suspension that's in good working order but these aren't up for completely replacing an OEM suspension on any vehicle. Once you have an OEM suspension back in place I recommend checking out the Timbren Rear Suspension Enhancement System # TGMRG25C rated for 6,000 lbs and replaces your OEM bump stops so when your vehicle...
view full answer... - Which Timbren Rear Suspension Kit Fits 1999 Chevy Express 1500 Rear AxleYes, the Timbren rear suspension enhancement kit part # TGMRG25C does for sure fit your 1999 Chevy Express 1500 van rear axle.
view full answer... - Suspension Enhancement Recommendation For 2014 Chevrolet Express VanTo provide more support in your 2014 Chevrolet Express Van, I recommend the Timbren Vehicle Suspension, part # TGMRG25C. This will not affect the ride of your Express when empty but will help support the suspension when a load is added. The hollow rubber springs act like shock absorbers, and increase stability, along with extending the life of your suspension. This is a simple installation and replaces the axle bump stops on the frame. This system does not increase the weight carrying...
view full answer... - Clearance Dimension for Installed Timbren Jounce Spring Kit on 2003 GMC Yukon XLIt is not a problem for the Timbrens to rest on the axle but they may affect your unloaded ride characteristics as you note. You can try shifting around the cargo load in the truck to see if this changes the spacing between the spring and axle. As noted in the instructions, which are linked for you, there may be no visible gap when this kit is installed on certain medium- and heavy-duty vehicles. All suspension enhancement kits for your 2003 GMC Yukon XL, whether air bags or jounce springs,...
view full answer... - Timbren Suspension Enhancement Recommendation for a 2003 Chevy Tahoe with Arnott ShocksThe Timbren system part # TGMRG25C that you referenced has been confirmed as a fit for your 2003 Chevy Tahoe. The Arnott shocks you referenced would work just fine with the kit. This kit will not give you additional towing capacities beyond what your vehicle/suspension has, so it will work well as long as you stay under the stated capacities.
view full answer...
Do you have a question about this Vehicle Suspension?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Video Edited:
Andrew K
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Robert C
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Carrie F
Updated by:
Bethann B
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Francis
2/21/2024
after one year of use the rubber springs are like new , no damage , no crack.