To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When gear, rooftop tents, or recovery tools stack up, rear-end sag can throw your setup off balance. The Air Lift LoadLifter air helper spring kit adds up to 3,400 lbs of load-leveling capacity to keep your ride height even and your handling stable. By reinforcing the rear suspension, it helps manage heavy or uneven loads and keeps steering and braking consistent whether you’re packed for a weekend or a long expedition.
No two trips are the same, and this system adjusts right along with you. With 5 to 100 psi of pressure range, you can dial in each air spring for front-to-rear or side-to-side leveling depending on cargo placement. Add air when fully loaded for solid control or drop to lower pressure when empty for a smoother ride. Pair it with an onboard compressor for quick changes on the go.
Rough trails need full suspension movement, not limited travel. The included Air Lift spring cradle keeps each bag properly positioned while allowing complete suspension droop for better traction on uneven ground. Built-in drain holes help clear mud and debris so the system stays clean and ready for more miles in the dirt.
Dusty desert tracks, forest ruts, or wet washouts—these air springs are built to handle them all. The two-ply, fabric-reinforced rubber construction and high-strength Zytel nylon endcaps resist corrosion and impacts that wear down steel parts. Season after season, they hold pressure and performance steady without leaking down or giving out under stress.
Constant pounding from off-road travel can wear out factory suspension fast. By distributing weight more evenly and absorbing shock before it reaches your shocks and springs, this LoadLifter kit helps cut down on fatigue and keeps your suspension working longer. It’s a simple way to add control under load while protecting the parts you already rely on.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the Air Lift LoadLifter air helper spring kit with the air spring cradles for your rear axle. They have a 3,400 pound load leveling capacity. Now this is a custom-fit part. It is designed to fit the 2020 and newer Jeep Gladiator trucks. And on a custom-fit part like this, I do like to recommend for you to go to our website, use the fit guide, put in your year, model, vehicle, and it'll show if this will work for your application.
Now, off-roading and overlanding is gonna demand a suspension system that can adapt to unpredictable terrain. So this air LoadLifter air spring will gonna provide up to 3,400 pounds of load support, helping your vehicle maintain a nice level stance while navigating any trails, rock gardens, or washboard roads. These are gonna improve stability, means better traction, braking, and control. So it's essential for venturing off the beaten path. Now also, whether you're loaded up with rooftop tents, water tanks, or recovery gear, the vehicle will balance is gonna be critical.
So with pressure ranges on these springs from 5 to 100 PSI, you can fine tune each air spring independently for side-to-side or front-to-rear level. So this adjustability is gonna help manage uneven setups and shifting cargo, helps reduce sway and maintaining comfort across any rugged landscapes. Also, if thanks to the included Air Lift spring cradle here, these air springs are gonna stay properly positioned while allowing full suspension droop, so it's ideal for offload articulation. The integrated drain holes in these cradles will help flush out any water, mud, and debris, keeping your system cleaner and trail-ready. Now from the dusty dirty desert tracks, so any muddy forest trails, these springs are built to last.
The springs themselves are constructed with two-ply fabric reinforced rubber, and they use the high-strength of Zytel nylon end caps. These will resist corrosion and impacts far better than traditional steel components. So you're gonna get dependable performance season after season. Now the rough terrain in the constant jarring can wear down your stock suspension fast. These air springs will reduce the strain on your OEM components by distributing the weight more evenly and absorbing trail shock.
So this is gonna be less wear on your shocks, fewer maintenance headaches, and longer life for your rig suspension system. Now these are built to last. These airlift helper springs are probably made in the U.S.A. Again, the weight capacity, load level capacity is up to 3,400 pounds. If you notice, it will come with everything shown here on the table. It comes with the air lines you need with the valves on the end. Comes with all the hardware you need, some zip ties, and even the nice set of installation instructions that'll describe how this all goes together. But that's gonna do it for a look at the Air Lift LoadLifter air helper spring kit with the air spring cradles for your rear axle.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
1/12/2026
That is great to hear! I am glad they are working well for you. What made you want to add the airbags?