To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Developed to deliver the penetrating light needed from your fog lights or ATV/UTV headlights, these LED bulbs improve clarity and contrast. Stout construction and an enhanced, active cooling system keep these bulbs at full power from dusk to dawn.
Features:
Specs:
Note: LED bulbs are an acceptable retrofit for a Fog light application and are not federally regulated, state and local regulations may vary. Always use gloves or a clean shop towel to reduce the transfer of oils from your skin to the contacts during installation.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey, everyone. Shane here with etrailer.com. Today I have a 2014 Ram 2500. I'm gonna walk through how to install Sylvania's H11 Headlight Bulbs. Upgrading from a halogen bulb to an LED bulb, it's not only gonna give you a much clearer view in front of you, but it's gonna make the light a lot brighter for you. For instance, if you're on a back road somewhere that doesn't have streetlights.
You're gonna see not only much farther in front of you, but a lot wider. This light in particular is 6,000 Calvins, so it's just about a pure white. It's gonna have an aluminum housing on it. So being outside like this, we're not gonna have to worry about the housing on it corroding. It's also gonna have a cooling fan in it.
The cooling fan runs at 10,000 RPMs and it's gonna help dissipate heat from the light so that the light lasts a lot longer. The H11 is gonna be designed to fit the 2010 2023 Ram 2500. It's also going to fit your UTVs and ATVs. It can be used for headlights or fog lights. You just wanna make sure you check the fit on the back housing of your lights and make sure that the H11 is going to lock into place.
So now what we're gonna do is we're gonna shut off our lights. We have the truck facing a white wall. We're gonna shut off the lights and show you what they look like. So you can see how bright these lights are on this white wall. They sit pretty high or about at my chest.
So we're gonna see really far down the road. You can also see how wide they go, with my shadow going all the way over to the corner of this wall. So not only can we see far out in front of us, we can also see wide off to the sides of the road as well. Now if you're looking to replace your bulbs, you have halogen and you have LED. If you know halogens, if you're closer to my age, when you think about a halogen light, you think about the yellow color. Halogen have come a long way. So if LED may not be the way you want to go and you're still looking at maybe a halogen, Sylvania does make a halogen bulb that is close to the 6,000 Kelvin. So it's gonna give you a white color. Keep in mind, being a halogen light, you're gonna be replacing it more often. It's gonna have a lot more amperage draw on the vehicle. With an LED light, they're designed to last longer with a lot less draw. As far as the installation process, it's pretty simple and straightforward. On the Ram truck, you will have to remove the grill, but it's just a couple bolts and a couple of clips on each side. The headlights just have a couple screws in them and a locking tab in the back. Once you get your headlights out, there's a little cap on the back. You unscrew it, put your new bulb on, twist it, plug 'em together, reinstall your lights, and you're ready to go. Now that we've gone over some of the features, let's walk through how to get them installed. Just start your installation, we're gonna need to remove the grill. To do that, you're gonna have a little cover. So on the top it's got some little push pin Christmas tree fasteners. Pop that off. You're gonna have four 10 millimeter head bolts that run across the top. Take those out. And it might be easier if you reach down in there. There's little tabs. I'll go ahead and just pull it off. Little tab here, little tab here on each side that clip in right here and here. Pop those out. We'll set the grill aside. To remove our headlight, 10 millimeter head bolt here, and one right there. (metal creaks) In your wheel well, there's a little flap. Open that, and on the backside of the light, there's gonna be this long yellowish tab that locks the light in. You need to push that tab up. From in that inside that cap in the wheel well, you're gonna see this little guy right here on the back of your light. That white tab is this guy right here. You need to make sure it's pushed up so that this slides out of it. You're gonna have a little fastener right here. Pop that off. We're just gonna twist this blinker bulb out. And then for this light, this little white piece here, you need to go up with it. It might have to use a little screwdriver, so I'm gonna get it to pop up. It's actually a lot for the a light. Take this little white tab, use a little screwdriver 'cause it get gunked up with dust and dirt. Slide it up and then push on this black tab right here. Separate the light and we'll take it all the way out. On the backside of your light, you're gonna have a cap. Twist it. We're gonna take off the one that is not working. Make sure you don't touch the LED bulb with bare hands. Get that plugged in. We can shove all this down inside the housing. Twist it, put your cap back on and we'll plug our light back in and test it out. Now that we know it's working, we'll reinstall our light and repeat the process on the other side. Once you have everything back together, you're ready to go. We're gonna do it for a look at an installation of the Sylvania H11 Headlight Bulb on a 2014 Ram 2500.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.














Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.