Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
Item # D13502
Retail:$73.99
Our Price: $64.99
You Save: 12%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (816)
- Q & A (0)
- Photos
1987 Ford Ranger - Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Plate-Fin Cooler
- With 11/32 Inch Hose Barb Inlets
- Standard Mount
- 11W x 7-1/4T x 7/8D Inch
- Derale
11" Wide x 7-1/4" tall x 7/8" deep, efficient heat exchanger will prolong the life of your transmission and improve its overall performance. Specifically designed for Ford Rangers with late-model, electronic overdrive transmissions.
Features:
- Prolongs life of transmission
- Improves overall performance
- Prevents heat-related failures
- Has furnace-brazed aluminum construction and 3/4" wide turbulator plates for more efficient cooling
- Includes complete mounting kit, OEM spec hose with stainless steel clamps and Insta-dapt radiator adapter
- Recommended for mid-size cars, trucks and SUVs
Specs:
- Inlets: 11/32" hose barb
- Overall dimensions: 11" wide x 7-1/4" tall x 7/8" deep
- Distance between inlets: 10-1/4"
- Mounting dimensions: 6-1/8" tall by either 5-1/4" or 6-3/4" wide
- 1-Year warranty
Note: The Derale Insta-dapt radiator adapter fits most vehicles with 5/16" transmission lines, but not all. In some cases, additional fittings or alteration of the OEM lines or hoses may be required for installation.
One of the more popular cooling systems available, the radiator-style, plate-and-fin heat exchanger provides increased surface area so that fluids can spread out along the finned chambers to cool faster. In addition to the increased surface area, this cooler also features turbulator technology, whereby fluids are agitated continuously, not only to facilitate heat transfer, but also to prevent any undesirable drop in pressure.
13502 Derale Series 8000 Plate and Fin Heat Exchanger with Installation Kit
Hidden Hitch # HH41310
Hayden Automotive # 677
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Too difficult to install
Customer Reviews
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient - D13502
Average Customer Rating: 4.7 out of 5 stars (816 Customer Reviews)
11" Wide x 7-1/4" tall x 7/8" deep, efficient heat exchanger will prolong the life of your transmission and improve its overall performance. Specifically designed for vehicles with late-model, electronic overdrive transmissions.by: Tony K10/15/2013
2012 GMC Yukon
Transmission cooler installation on 2012 GMC Yukon 5.3L.
Top brace added for support.
by: Adam P08/12/2020
Buy the extension hose Derale 13003, you'll need it on a 2016 Odyssey (Napa can't help you, this is an odd size hose, force 5/16" or 3/8" on at your transmission's peril $$$$! Decent cooler, simple.
by: James05/31/2016
2009 Toyota 4Runner
Great product. Super easy to install on my 2009 V6 4Runner. Keeps my transmission nice and cool. I did buy a little bit of extra hosing to mount it further on the other side of the car. But otherwise a complete kit for mounting it.
by: Peter P.04/10/2012
2010 Subaru Forester
Cooler came just in time. I installed it in my 2010 Subaru Forester so that I can safely pull my trailer without boiling my transmission. Glad to say I needed no special fittings to get the job done. The cooler looks well made and the size is just right...anything bigger would be a tough fit.
by: Lynn 05/09/2023
The installation was straightforward, and the temperature difference after the cooler was significant. This cooler will place additional years to the life of the transmission with 230,00 miles.
by: Donell07/26/2021
As far as I know, it's working well. I did the install so I could tow with my 2011 Honda Odyssey. I paired it with an etrailer power steering cooler.
Install was fairly smooth. I had more issues with broken fairing fasteners than I did with this cooler.
I used a bluetooth ODB reader to keep tabs on transmission temps while towing a small 4x6 enclosed trailer approx 400mi one-way. Empty weight was around 300lbs, we may have filled it to 1K lbs. Temps were in the mid-upper 80*f range, all highway driving along mostly flat roads.
I did a lot of googling to try and find aceptable temps, good luck.
Later on I used a small utility trailer to move an entire 3K Sq ft home. Distance was approx 1/4 mile (close by). Transmission temps remained good after many round trips. Fluid color remained acceptable.
Donell
7/27/2022
Since last review I rented a uhaul 4x6 enclosed trailer a few more times to help someone move. Still no tranny or steering issues. Transmission fluid still remains an acceptable level of pinkred. Additional upgrade has been a pair of Timbren rear suspension enhancement in prep for my next trailer adventure. The factory bump stops were damaged. The Timbrens are supposed to handle the constant contact as the rear end sags under load. Ill provide an update on those after the trip.
by: Philip05/08/2023
This was fairly easy to install. As far as I can tell it's working great. I am trusting that it will help extend the life of our transmission and keep things cool when we travel to the Rockies later this year.
by: Mark06/20/2018
2006 Toyota Tacoma
Excellent transmission cooler with fairly easy installation. I chose to mount mine to brackets in front of the radiator rather than by pushing mounting rods through the radiator condenser. Plans for my 4-cyl Tacoma were initially for pulling a utility trailer out to my land and back. Wife wanted to get an RV and take trips. All of my purchases and installations from etrailer were based on the expert advice from the sales people. And, I actually purchased and installed all the parts before we bought an RV. This shows you that the installation videos are spot on. I could never hook up a trailer and 'try it out'. But everything worked perfectly. I kept all the weights under limit, used a weight distribution hitch, brake controller, Timbren Rear Suspension Enhancement System, and side mirrors, along with the class III hitch, and 4 pin and 7 pin wiring harness that I installed.
My Tacoma is only rated for towing 3500# but we never had a problem pulling a 3000# load. 65 was tops on the speed and that was on a straight road.
My scan gauge indicated that my transmission temp stayed at 165 except for when we traveled through stop and go city traffic. Then it rose to 185/190 for short times. Back on the road and it dropped to 165/170 a gain.
I was really impressed with this little cooler.
Mark
6/20/2019
Still going strong after a year.
by: Dallas M10/27/2020
Toyota FJ Cruiser
I installed this trans cooler in a Toyota FJ cruiser that I use for occasional towing of trailers/loads up to about 4500 lb. The cooler, of course, is hidden away in the engine compartment so I don't really see it. It does the job I expected, keeping the trans fluid within range with no drama. I am quite satisfied with it and recommend it.
Dallas M.
10/28/2021
Still working, no issues at all. I use the FJ to tow an overlanding trailer and occasionally a flatbed with a tractor on it. No increase in transmission temp for either situation. So the cooler works. Its just there. No drama, no issues.
by: Kim S.06/26/2014
i do the ordering and my husband does the changing of shipping times after the order is placed. e trailer excelled in assisting me with all these things. Outstanding company with ultra nice customer service folks. Will do business here again and again.
Kim S.
6/26/2015
As expected.
by: Georg H.05/23/2013
2008 Honda Odyssey
So far so good. Just installed the cooler a couple days ago getting ready for a move trailing a full load for 1000mi.
Install guide and descriptions are very generic and therefore require a bit forethought and pre-work.
Will see how the product will hold up in the long run.
Shipping and transactions with etrailer have been excellent once again.
Georg H.
6/3/2014
The product has been working fine and just as expected. Have not had any issues since the big haul last year.Definitely recommend this product for anyone in need of.
by: Zack Hamilton02/07/2017
2005 Honda Odyssey
I have is d Etrailer 8 or 9 times. Everything I've ever bought from Etrailer has been great. The installation videos alone are great, but the the thought that goes into the gagets they ship with the hitches to get the job done at home is amazing. There customer service is great also. I didn't need one of the parts I purchased so I returned it with no issues or hassle. Thank you!!! It's rare to find a company with values like yours.
Zack
by: Steve P.07/15/2014
2007 Chevrolet TrailBlazer
The cooler is a great add-on to help guarantee the life of my transmission in my 2007 Chevy Trailblazer.
The size was perfect for mounting just behind my grill and well in front of the stock radiator with barely any modification/trimming of the surrounding plastic. I have no real world temperatures but I am happy knowing the the temps in my transmission are at least a little bit cooler.
The only mist-step is the included mounting pieces. While handy to get things in place after forgetting to pick-up bolts, washers and nuts, the plastic ties really didn't hold up well for the 2 weeks until I removed them. They also don't play well with the bendable mounting kit unless you have something to eat up the space when the ties are tightened as far as they can go. Again, it's minor and had I remembered to purchase the hardware I eventually used prior to the actual install, I probably wouldn't even be writing this.
Also, the hose is certainly not long enough for my application.
by: Chris07/06/2021
I had this installed in my 2008 Nissan Titan to prevent transmission overheating. My Titan has the big tow package, max tow is 9,400 lbs and comes with a factory transmission cooler but it just wasn't enough to keep the gauge out of the hot zone when towing heavy. After installing this I pulled my 5000lb 27ft camper in 104 degree heat up hills and with a head wind, the gauge never left the normal temp range area. I would buy again. I do recommend this transmission cooler for additional protection against heat.
by: Rachelle07/15/2022
We use this to help us tow a 3,000lb camper with a 4 cylinder Tacoma. It works well. We didn't like the plastic mounting hardware to piggyback it onto your existing radiator so we used thick zip ties to mount it to the radiator frame.
by: Robert H07/20/2019
The hitch assembly that I purchased from etrailer.com for my Honda Odyssey and the transmission cooler are working fine and I have pulled my 1972 Shasta camper several times without fail. I'm very pleased with the product quality and the easy to follow instructions included.
by: Mike04/15/2022
The install from what I remember a year ago went better then I originally expected as far as not having to tie it to the radiator. Simply haven't had any problems with it. just glad it's there and allows me to bypass the overheating from the radiator. I've also had to have my trans rebuilt sense installing the cooler but that was going to happen anyways, but knowing the cooler is there makes me not worry about any life being taken away from the trans rebuilt. Now I'm looking for a necessary engine cooler but couldn't remember where I got the trans cooler from.. Now I do!
by: DRK09/21/2020
Had an automatic transmission that would overheat pulling a trailer up a steep grade on rough dirt roads. Put a deeper aluminum oil pan on it but still had the problem. This cooler has cured that problem. Wasn't too bad to install. It didn't come with enough hose for my application though so I deducted a star
by: Ben 11/16/2021
2006 Toyota Sienna
I installed this cooler on our 2006 Sienna to extend its life while towing our R-Pod 172 trailer. It appears to be doing its job, and after a year everything is still in it's place. Installation required a tiny bit of tinkering to route the hoses and zip ties, but it all went about as expected. The job was done in an afternoon (I am handy enough, but definitely not a car mechanic). I did wrap and tape some sheet metal around parts of the hoses to protect them from getting cut where they would otherwise be pushed against sharp edges. See photos.
by: Patrick Conrad03/14/2017
2009 Honda Odyssey
Previously installed cooler from Etrailer in a 09 Odyssey. Hauled trailer all through WA, OR, ID, WY, UT, NM and CO (crazy high passes) with no problems.
New cooler is for '13 Jeep GC. The cooler came with clear instructions and all necessary fittings. I will mount it on aluminum brackets to bumper behind grill rather than plastic rivets to rad.
Thank you.
by: Mark05/08/2017
2003 Chevrolet TrailBlazer
Purchased a Tranny cooler from Etrailer a year ago and it has worked out great. Parts shipped out quick. Everything was of the highest quality. Very easy to install with the bracket kit. I will be sure to use Etrailer again.
by: JD07/15/2016
Toyota Sienna
Great quality easy installation. Make sure you know which hose goes from and goes to your radiator for proper installation, your dealer DOESNT KNOW and wont be of any assistance lol this will ONLY work on Sienna XLE or Limited with tow prep package. The upgraded radiator has the trans cooler lines.
by: Rex 09/09/2017
Chevrolet Traverse
This was recommended by etrailer for my Traverse. It was fairly easy to install, (mostly with help from YouTube videos). I took my time and it took about 3 hours. If I did it again it could probably be done in an hour or less. It's been a year of towing an 18' ski boat and it has totally done the job. That adapter that is recommended with this is vital as far as I can tell.
by: Philip5007/16/2016
2000 Honda Odyssey
I am glad to have purchased this cooler. I live in an area that gets fairly hot during the summer. I feel safer knowing that my transmission has extra cooling. The cooler was easy to install, the instructions were clear. Thanks
25
814
Show More Reviews
See what our Experts say about this Derale Transmission Coolers
- Transmission and Power Steering Coolers for 2015 Jeep PatriotThe 2015 Jeep Patriot with either 2.0L or 2.4L engine does have a towing capacity of 1000-lbs; the 2.4L models with the Trailer Tow Prep Package (AHC) or the Freedom Drive II Off Road Package (AWL) can tow up to 2000-lbs trailer weight. You can see these towing specs in the page from the owner's manual (page 179) that I linked for you. Towing capacity for any vehicle is determined by the auto maker and adding aftermarket products does not increase it. Installing a hitch with a higher rating,...
view full answer...
- Connecting Transmission Cooler to 2016 Ford F-150 3.5 EcoboostYou need to follow the lines further till you get to the radiator and disconnect them there as that is where the fittings will easier connect. The hose of the # D13502 needs to fit over a threaded fitting and not the type of fitting you have found. If you add the cooler in where the lines attach to the radiator/cooler the fittings will be compatible.
view full answer...
- Recommendation for Complete Towing Setup on a 2007 Chevrolet Uplander 3.9 LiterI did some research on your 2007 Chevrolet Uplander and found that the maximum recommended towing capacity for this vehicle is 3,500 pounds. If your trailer is 2,600 pounds empty, you would be limited to 900 pounds or less of cargo. If 900 pounds of cargo sounds about right, you will need to check your hitch capacities and make sure it is capable of towing 3,500 pounds. You may find that a weight distribution system is needed to safely tow the maximum capacity with your vehicle. You should...
view full answer... - Can You Install a Transmission Cooler on a 2007 Subaru LegacyTransmission coolers are not vehicle specific, in order to determine if this Derale Transmission Cooler # D13502 would fit on your vehicle I would recommend you check out the area in front of your radiator and measure it to determine if you have enough room for this cooler to fit. The dimensions for this product are listed on the product page under the specs heading. I attached installation instructions and an installation video for this product for you to check out also.
view full answer... - Transmission Cooler Recommendation for 2015 Chevy TraverseTransmission coolers are so universal in the way they install that we don't call out specific part numbers for vehicles. We've found that basically as long as you can fit the cooler in the area in front of the radiator you're fine. I'd go with the larger Derale # D13503 as it will do a really great job keeping your transmisssion fluid cool. It measures 11" Wide x 8-3/4" tall x 7/8" deep and is the very efficient plate fin style of cooler.
view full answer... - Transmission Cooler Recommendation for 2014 Acura MDXWe typically recommend going with the biggest cooler you can fit in front of the radiator of the vehicle. Commonly we recommend the # D13502 and # D13503 as they are decently sized and very efficient. Either size should fit and work well for you. I attached an install video on a similar Honda vehicle to give you an idea what the install is like.
view full answer... - Is a Transmission Cooler Needed to tow an 1800lb Camper with a 2009 Subaru ForesterA transmission cooler is not necessarily mandatory for towing, but you will definitely want to check your owners manual to see if there are any stipulations from Subaru saying a cooler is required. You will sometimes see that the vehicle manufacturer requires a transmission cooler be installed for towing purposes, just to retain the vehicle warranty. The Derale Transmission cooler # D13502 would be a good choice for your 2009 Subaru Forester. It would work well for your application,...
view full answer... - Which Transmission Cooler is Best for 2010 Honda OdysseyThe # D13503 is a slightly larger cooler than the # D13502 (about 1-1/2 inches taller). The bigger cooler you can fit on your vehicle the better so I would recommend the # D13503 as it would cool your transmission fluid better than the # D13502. Coolers aren't vehicle specific so either would technically fit, but the bigger one will do a better job. I attached the install video you referenced as well.
view full answer... - Oil Cooler Recommendation for a 2004 Ford EscapeI did some checking and it looks like the Derale Tube-Fin Engine Oil Cooler Kit w/ Adjustable Sandwich Adapter # D15505 will work on your 2004 Ford Escape. From the research I did the threads on the oil filter are 22 x 1.5 mm and the # D15505 comes with that size so it should work very well for you. I attached an FAQ article on oil coolers for you to check out also.
view full answer... - What is Included in Tow Package on a 2008 Toyota HighlanderThe features and equipment that constitute an auto maker's OEM "tow package" can vary by vehicle manufacturer, vehicle model and model year. Auto makers may change the elements of a "tow package" for any number of reasons. The best way to determine exactly what your particular Highlander's equipment and capacities are is to contact your local dealership with the VIN number. They can then determine exactly how it is equipped. If you have need for a weight distribution system for your trailer,...
view full answer... - Is It Hard To Install a Transmission Cooler On a Honda PilotThe installation of a transmission cooler is not difficult per se but it will take some time. The first part of the process is removing various panels and trim pieces until you have access to the space in front of the radiator. Then, once this is done you will need to find out which line is for the return side but this is pretty easy as all you will need to do is cycle through the gears a few times and then feel each line to see which is hot and which is cool. The cool line will be for...
view full answer... - Transmission Cooler, Hitch and Trailer Wiring for 2016 Honda OdysseyWe have the Derale transmission cooler part # D15302 that we've had the chance to install on a similar 2014 Honda Odyssey that I recommend for your 2016 model. This will keep the transmission operating at a cooler temperature which will prolong the life of it. Check out the install video I attached for more info as well. For a trailer hitch I really like the Draw Tite part # 76025 which has great towing capacities and also only has the lower hitch opening visible below the rear bumper...
view full answer...
- Transmission Cooler for 2012 Chevy EquinoxYes. There are several transmission coolers available for your 2012 Chevy Equinox. I recommend the Derale # D13502 which is a plate fin cooler that won't require any additional hardware or hose adapters to work in your Equinox. The plate fins help disperse heat better than a traditional tube fin cooler and this cooler is specifically designed for Chevrolet Equinoxs with late-model, electronic overdrive transmissions. For the best cooling efficiency, you'll want to mount this in front of...
view full answer...
- Transmission Cooler Recommendation for a 2000 Mitsubishi Montero SportA transmission cooler will definitely help you to preserve the life of your transmission in your 2000 Mitsubishi Montero Sport. The number one killer of transmissions is heat build up, and a transmission cool is one of the best products to protect against heat. I attached an FAQ on transmission coolers for you to check out also. The Derale Transmission Cooler # D13502 that you referenced would be a good choice for you as long as you have enough clearance for it. You will need to measure...
view full answer... - Determining the Location of the Transmission Return Line on a 1992 Pontiac Grand PrixI am not sure of the exact transmission in your 1992 Pontiac Grand Prix, but from my research the location of the transmission return line on your transmission is the horizontal line leaving the transmission. You should be able to follow that line to either the top or bottom of your radiator. The easiest way to verify which line is the return line is by starting the car and putting it in drive for a few minutes. The cooler of the two lines will be the return line. If you can tell me...
view full answer... - What are Transmission Coolers Made Out OfTransmission coolers are not made out of stainless steel, they are made out of aluminum and copper because the cooler needs to transfer heat away from the transmission fluid and metal as quickly as possible and aluminum and copper are the most efficient metals for this process. Stainless steel tends to hold heat rather than dissipate it quickly as aluminum does. I have attached links to some information on transmission coolers that may be helpful also.
view full answer... - Tow Package Recommendation for a 2012 Dodge CaravanTransmission coolers are often not totally required, but they do help prolong the life of the transmission. It's your call, but it's a cheap investment to help prolong the life the transmission. For a transmission cooler I would recommend the Derale Transmission Cooler part # D13502. For a hitch I would recommend the Draw-Tite Class III receiver, part # 75579. You will also need a trailer wiring harness, part # C56331 to provide a 4-pole trailer connector. If the camper uses a 7-way connector...
view full answer... - Equipping 2008 Chrysler Town and Country for Towing 2200 lb Pop-Up CamperAs a first step, I'd recommend definitively finding out the tow capacity of your Town and Country. The 1800 lb capacity sounds about right. The owners manual states that vehicles equipped with the 'trailer tow package' can handle up to 3800 lbs (with only two people in the vehicle). The trailer tow package almost certainly includes a transmission cooler, but there might very well be other upgrades like different gearing or suspension modifications that provide the increased towing capacity....
view full answer... - Parts Needed to Equip 2014 Ford Escape for Towing Small Pop-Up TrailerAccording specs I've located online, the 2014 Ford Escape will have a 2000 lb towing capacity if equipped with the 1.4L engine or 3500 lb if equipped with the 2.0L. You should be able to pull that pop-up with no problem. I would recommend a transmission cooler like # D13502 if you plan on pulling the camper in a mountainous area, though as it would offer inexpensive protection for your transmission. For a trailer hitch, I'd recommend the Curt Class III hitch, part # C13186. The trailer...
view full answer... - Recommended Transmission Cooler For 2011 Nissan XterraThe first thing you need to consider is the size of the transmission cooler. The larger the cooler, the better. Next you need to make sure you have sufficient room for the cooler. The best location for your cooler is between the radiator and the grille. You will need to measure that area and then find the cooler that will fit. I recommend the Derale Series 8000 Plate-Fin Transmission Cooler, part # D13502. This is a Class lll cooler that measures 11-inches wide, 7-1/4 inches tall, and...
view full answer... - Available Class III Transmission Coolers for 2018 Ford F-150 with 2.7L V6 EcoBoost EngineWe offer transmission coolers for your 2018 Ford F-150 with 2.7L V6 EcoBoost engine at several different price points. All are displayed on the linked page. The Derale transmission cooler # D13503 is rated as a Class III cooler. They also offer a slightly smaller and less costly Class III model, part # D13502 and also the larger Class III model # D12903. A slightly less-efficient Class II cooler is offered, part # D12906. For best overall value and performance I recommend transmission...
view full answer... - Recommend Trailer Hitch and Brake Controller To Tow 3400 lb. 21 Ft Trailer w/ 2010 Dodge NitroFor a complete towing setup for your 2010 Dodge Nitro Heat to pull your 21 foot travel trailer, you will need a hitch, brake controller, and wiring. In addition, I would recommend a weight distribution system with sway control, and adding an aftermarket transmission cooler. The Curt Trailer Hitch, part # 13334, which is a Class III 2 Inch Hitch, would be a good choice for your Dodge Nitro. Part # 13334 mounts below the rear bumper fascia. We do not have a hitch available for the Nitro...
view full answer...
- Can I Replace Factory Cooler With Derale Transmission Cooler on 2007 Dodge Grand CaravanIt is possible to install the transmission cooler like Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets part # D13502 to bypass the factory cooler on the 2007 Dodge Grand Caravan however it is usually not recommended by the vehicle manufacturer. If you decide to bypass the factory cooler, you would want to go with the largest aftermarket cooler possible that will fit to get efficient cooling. The largest cooler that fit's is the best option because after market coolers...
view full answer... - Which Line is Return Line on Ford C4 Transmission for Installing Transmission CoolerThe rear line is the return line on a C4 transmission like what you have in your 1983 Ford Mustang. This would the line that you would install the transmission cooler on.
view full answer...
Do you have a question about this Transmission Cooler?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Brent H
Test Fit:
David F
Test Fit:
Ryan G
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Sue W
Video by:
Andrew K
Video by:
Dustin K
Updated by:
DeAnne T
Updated by:
Wilson B
Updated by:
Daron K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Irvin
10/3/2014
where is the cooler on a 1994 eagle vision