See what our Experts say about this Optronics Trailer Lights

• Best Replacement For Optronics S2T216AP2 Driver Side Tail Light
  Hello George, thanks for reaching out. From what I've found online, the LED Tail Light for Trailers # STL17RB is the recommended drivers side replacement for the S2T216AP2. This is a 8-1/16" long x 2-7/8" tall x 2-13/16" deep tail light. You can see what it looks like in the picture below. Does this match what you have? We have the passenger side # STL16RB available too if you want them to match. These lights do not come with plugs though, so they will need to be wired in and you will...
  view full answer...
• Looking For Tail Light To Replace Monarch 5236 Lights
  Hello Robert. I looked up these monarch 5236 tail lights and from what I can see, this particular light is obsolete. We do have a good replacement option for you, but we do not offer a direct replacement. Our closest LED taillight assemblies we carry are the part # STL17RB for the driver side and part # STL16RB for the passenger side. These lights measure 8-1/16" long x 2-7/8" wide x 2-13/16" deep.
  view full answer...
• Replacement 8x3 Submersible Tail Light for 2007 Four Winns Horizon 200 Boat Trailer
  I believe what you're referring to is something like the lights which come in the Optronics LED Tail Light Kit # TLL160RK. These measure 8-1/16" long x 2-7/8" tall x 2-13/16" deep and are submersible so they are perfect for your 2007 Four Winns Horizon 200 boat trailer. You can get them in the kit mentioned above or just for individual sides with part # STL17RB (driver side) or part # STL16RB (passenger side).
  view full answer...
• What Gauge Wire Should Be Used For Optronics STL17RB And STL16RB Tail Lights?
  Hey Terry, thanks for reaching out. For the Optronics # STL17RB and # STL16RB tail lights 16 gauge wire is what I would use. For the brakes you will want to use at least 12 gauge wire. If it is a shorter trailer you can get away with 12 gauge, for longer trailers say 20' or longer you may want to up that to 10-gauge. We sell this wire by the foot if you need some. Take a look at the following: - Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot # 10-2-1 - Jacketed 2 Wire (Brake Wire)...
  view full answer...
• Replacement for Wesbar 102641 Tail Lights
  The Optronics LED Combination Tail Lights # STL16RB and # STL17RB are the best replacement option for the old Wesbar lights. These have all of the functions you need and then some with brake, tail, turn, side marker, side reflex reflector, rear clearance, and rear reflex reflectors. The dimensions are also nearly identical at 8-1/16" long x 2-7/8" wide x 2-13/16" deep.
  view full answer...
• Replacement Lenses for Optronics Trailer Taillight # STL16RB
  Hey Nelson, the correct replacement lens for the Optronics light part # STL16RB is the part # A16RB. This is a replacement side and main lens.
  view full answer...
• Recommended Replacement License Plate Bracket, 4-Pin Harness, and Tail Lights for an 18' Bass Buggy
  Hey Ghent, I took a look at your trailer and it looks like they use square taillights, so something like the Optronics LED Combination Trailer Tail Lights # TLL160RK should work fine but I'd recommend measuring your current light first. These lights measure 8 1/16" long, 2 7/8" tall, are submersible, and has a 3 wire pigtail for easy install. This kit comes with both the left and right sides and has the stop, turn, tail, side marker, side reflex, rear clearance, and rear reflex functions...
  view full answer...
• Trailer Taillight Replacement for S2T216AP2
  From what we've found online, the proper replacement for your S2T216AP2 is # STL16RB for the passenger side and # STL17RB for the driver side.
  view full answer...
• Replacement For Boat Trailer Lights S2T216AP2
  The correct replacement for your for your S2T216AP2 is # STL16RB for the passenger side and # STL17RB for the driver side.
  view full answer...
• Replacement Taillight Assemblies for 2018 Sun Tracker S2T216AP2
  Hey Allen, the correct replacement for your for your S2T216AP2 is # STL16RB for the passenger side and # STL17RB for the driver side.
  view full answer...
• Trailer Light Kit Recommendation for Ranger Boat Trailer
  A great choice for your boat trailer is the LED Trailer Light Kit for Trailers Over 80" Wide # TL16RK. This kit includes 2 tail lights which serve 8 functions (Stop, turn, tail, side marker, rear clearance, side reflector, rear reflector, and license plate light) and 2 sidemarker lights, all fully submersible. It also includes a license plate bracket, stainless steel mounting hardware, quick splice connectors and a 25 foot long wishbone harness with a 4-pole flat. I definitely recommend...
  view full answer...
  
• Replacement Trailer Taillights For S2T216AP2 On A 17 Foot Mako Trailer
  With doing some research online I found out that The LED Combination Tail Light for Trailers over 80 inch Wide - Submersible - Red - Passenger Side # STL16RB and The LED Tail Light for Trailers Over 80 inch Wide - 8 Function - Submersible - 22 Diodes - Driver Side # STL17RB are the correct replacements for your 17 foot Mako Trailer. The lights have a 3-wire pigtail and have a durable plastic housing. They have a sealed, waterproof construction that is submersible. I attached a review...
  view full answer...
• Replacement Passenger Side Tail Light for Sun Tracker Trailer
  It definitely looks like you need a new tail light assembly for your 2017 Sun Tracker trailer. I recommend the LED Combination Tail Light for Trailers over 80" Wide - Submersible - Red - Passenger Side # STL16RB because of its long-lasting, bright LEDs, easy surface-mount and its waterproof housing. It may be a good idea to replace your driver's side light as well with the accompanying LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - Red Lens - Driver # STL17RB, or...
  view full answer...
  
• Replacement LED Marker Lights for Featherlite 3110 Tandem Axle Aluminum Car Hauler Trailer
  I checked the Featherlite website for photos of the LED lights used on their tandem axle aluminum car hauler trailer model 3110. The specs for this trailer indicate it uses LED type clearance and stop/turn lights but brand and dimensions are not provided. We do offer replacement LED lights for most trailer applications. Our main page for LED lights, which is linked for you, allows you to sort the results shown by just clicking on the characteristics you need, such as shape, color and mounting...
  view full answer...
• Replacement Tail Lights for Optronics A1STP2 93 on 2005 Trailstar Trailer
  We have both an LED and incandescent option for equivalent replacement lights on your 2005 Trailstar trailer. If you want incandescent lights then you can use the # ST16RB for the passenger and # ST17RB for the driver side. For LED lights you can use the # STL16RB for the passenger and # STL17RB for the driver side. I have attached some review and installation videos for your reference.
  view full answer...
• Replacement Tail Light Lens on a Snowmobile Trailer with Optronics Tail Lights
  If your tail lights look like # STL16RB or # STL17RB, then you can use the Replacement Tail Light Lens, # A16RB. This is the correct replacement for the tail light. If the lens portion is deeper on your lights than those pictured, you may have a 26 series light like # STL26RB as an example. The 1/16 of an inch would be the very first tick mark after the 8 inch line on a ruler (provided the ruler measures in 1/16 increments). Both my Staples ruler and Craftsman tape measure use the 1/16...
  view full answer...
• Converting Separate Turn Signals and Brake Lights to Combined Turn and Brake Lights on a Trailer
  If the trailer is one that is pulled by a motorcycle or a trailer designed to carry a motorcycle, you will need a converter in order to convert the wiring system used by the 6-Way to a 2 wire system used by trailer lights. The converter you can use is # RM-732. This takes the separate turn and brake signals and makes them a combined circuit. When you hit the brakes with the turn signal on, it should blink on one side and the other side will remain a solid brake light. The converter will...
  view full answer...
• LED Tail Lights for a Ranger Trail XT188 Boat Trailer
  I checked with Ranger and the current generation of the Trailer RT188 uses the 6 inch oval tail lights. For those the Miro-Flex Trailer Tail Light # STL22RB is a great option for an LED upgrade. These lights use pigtail # A47PB and will fit the mounts currently on the trailer. If your trailer has different tail lights, such as those that hang from studs then # STL16RB and # STL17RB are great options for that mounting style. If neither of the recommendations above are the light style or...
  view full answer...
• Triton Utility Trailer LED Light Replacement
  I pulled up pictures of your Monarch trailer lights and the closest LED taillight assemblies we carry are the part # STL17RB for the driver side and part # STL16RB for the passenger side.
  view full answer...
• Trailer Taillight Lens Recommendation to Replace AISTP2 85
  If your tail lights look like # STL16RB or # STL17RB, then you can use the Replacement Tail Light Lens, # A16RB.
  view full answer...
• Ranger Boats LED Trailer Light Pigtails Adapter Availability
  I have a couple of good options for you but there aren't any available adapters. Instead you will remove your current pigtails like the Optronics 2-Wire Marker Light Pigtails part # AL42PB. Once removed you add the the 2-Wire Pigtail for Optronics Backup and Utility Trailer Lights - 2-Prong PL-3 Plug part # A45CB for a straight wire or the Peterson 2-Wire Pigtail for Trailer Lights part # 142-49 for the right angled wire. To protect the splices I recommend using the Deka Heat Shrink...
  view full answer...
• Replacement Taillight for Heritage Boat Trailer
  If you're speaking of the # 106410 Wesbar Combination trailer tailllight, this particular lamp has a removable lens, and an interior capsule that can be removed by loosening 4 screws which will allow you to change the bulb. Some of the earlier versions used a self-contained capsule that needed to be replaced in entirety, but those are obsolete and are no longer available. Some of those lamps used a ground wire that attached to the trailer frame and two wires that terminated in a 2 pin connector,...
  view full answer...
• Replacement Tail Lights For Diamond City Angler 2072 Boat Trailer
  The Optronics LED Combination Trailer Tail Lights # TLL160RK contains both the drivers and passenger side tail lights that match your Diamond City Angler 2072 Boat Trailer. I was able to confirm with Diamond City that you have the Driver Side # STL17RB and Passenger Side # STL16RB tail lights.
  view full answer...
• Replacement Tail Lights for 2017 Trailstar Boat Trailer
  From what I could find it looks like your 2017 Trailstar boat trailer has the Optronics LED Combination Trailer Tail Lights # TLL160RK which are submersible and have dimensions of 8-1/16" long x 2-7/8" tall x 2-13/16" deep. This kit includes lights for both sides of the trailer but you can also get them individually as part # STL17RB for the driver's side or part # STL16RB for the passenger's side. The numbers that you gave me actually have to do with the testing of the lights themselves...
  view full answer...

Do you have a question about this Trailer Light?