Question:
I know nothing anout STL stc. Only thing I know is that I moved the jet skis trailer and broke a lens. Lens states Optronics. Other end states SAE D.O.T. AISTP2 93 -measures 8 x 2 7/8 - I think what I am looking at is it, but I dont know about that 1/16..
asked by: Joan
Expert Reply:
If your tail lights look like # STL16RB or # STL17RB, then you can use the Replacement Tail Light Lens, # A16RB. This is the correct replacement if the tail light has incandescent bulbs. If it is an LED tail light, use # AL16RB.
If the lens portion is deeper on your lights than those pictured, you may have a 26 series light like # STL26RB as an example.
The 1/16 of an inch would be the very first tick mark after the 8 inch line on a ruler (provided the ruler measures in 1/16 increments). Both my Staples ruler and Craftsman tape measure use the 1/16 mark so it is common. Deepening on the angle you are at when taking the measurement in may look like 8 inches. It could also look higher or lower.
Replacement Tail Light Lens for STL16, STL17,STL18 and STL19
LED Combination Tail Light for Trailers over 80" Wide - Submersible - Red - Passenger Side
LED Tail Light for Trailers Over 80" Wide - 8 Function - Submersible - 22 Diodes - Driver Side
Miro-Flex LED Combination Trailer Tail Light - 7 Function - Submersible - 14 Diodes - Passenger Side
Replacement Tail Light and Side Marker Lens for Optronics Combination Tail Light - Rectangle - Red
