bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24842
lowest price pledge
Retail:$311.43
Our Price: $193.16
You Save: $118.27
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 29 lbs
Quantity: 
In Stock
24842 - 1-1/4 Inch Hitch Draw-Tite Custom Fit Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Videos

Need help with installation?
Locate installers near me
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24842 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (58)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24842

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Draw-Tite
  • Concealed Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24842 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60258 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24842 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24842

Average Customer Rating:  4.7 out of 5 stars   (58 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

Just as advertised. Fit is perfect. I installed it all by myself in about 30 minutes after watching the installation video. It is very doable.


Comments
A year on and it’s working fine. As advertised.
Joe - 02/24/2021

by:
2011 Mazda 3

This hitch is very easy to install. This is the 4th hitch I've installed on a vehicle and the others, although pretty simple themselves, were a little more time consuming than this one. I have a base model 2011 Mazda 3 sedan and it fit perfect. I backed the rear of the vehicle up onto ramps to get good ground clearance and was able to fish the hardware with the tools included and hold the hitch with jackstands and pieces of 2x4. I had to knock the hitch into place a little with a mallet, otherwise it fits nice and snug. I use the hitch for a bicycle rack primarily, so I didn't bother with a wiring harness install.


Comments
Still fine, however as with every hitch Ive installed, the paint is flaking. I would suggest, and will in the future, coat any hitch I install with better quality paint to slow the rustflaking as much as possible.
Bilal K - 04/04/2020


by:

Outstanding purchase experience. Had the hitch I needed in stock and shipped quick. I'm a repeat customer who will be back again!



by:
2013 Mazda 3

I needed a hitch for my new, hitch mount, bicycle rack. This product appeared to be very solid and fit my Mazda 3 perfectly. I had it professionally installed at a local U-Haul dealer. My bicycle rack mounted easily onto the hitch.

Con: There was one spot on the hitch that showed bare metal. That was quickly and easily remedied with a couple of sprays of Rustoleum spray paint. However, I'm not sure if that paint will be as durable as the paint on the rest of the hitch. Although it might be harsh, I lowered my rating by one star for QC not catching that minor problem.


Comments
The hitch is working great. All Im using it for is a hitch mount bicycle rack for two bikes, which it handles easily as would be expected.
Jim L - 08/10/2018


by:
Chevrolet Colorado

Products shipped fast, delivered when promised. Hitch went on without a hitch (pun intended). Everything was there in the box, everything fit. Light connectors were very easy, no issues with anything, and it was $225 less than the local hitch place quoted me to install. Next week it pulls a trailer with four mountain bikes and gear to Colorado for a week of riding and camping!


Comments
I use it extensively with a hitch mounted bicycle carrier. its very stable, easy to access and almost completely hidden under the bumper fascia. No rust, which means a lot from the Twin Cities Metro area in Minnesota. Lots of salt.
Craig B - 05/31/2016


by:
2012 Mazda 3

This is probably the 8th hitch I've ordered from e-trailer and installed myself. As always, pricing is excellent, items are high quality, and the instructions are good.

I really liked the little coiled bolt holding wires included in this kit. Made it really easy to get the insert plates & carriage bolts inside the frame. This hitch is also rather nice in that it's tucked way up behind the bumper, so you only see the receiver. Very clean.

My only minor complaint is that as always, the hitch was working it's way out of the cardboard box. No damage to it, but they really should reinforce the packaging a little more at the pressure points.

Thanks.


Comments
After a year, the hitch still looks great. It doesnt get heavy use- we only mount a bike rack on it a few times a year.
Brian - 07/12/2014

by:
2012 Mazda 3

The hitch is of excellent quality, all the fasteners were there, and it shipped very quickly. However, the installation instructions were not very thorough. The online videos helped, but nowhere did it mention that on my vehicle (2012 Mazda 3 Sedan) there is a fascia panel that must be removed and cannot be reinstalled with the hitch in position. Overall, very good, and the installation was not too difficult even for one person with the car on the ground.


Comments
After a year the hitch is fine and there are no signs of corrosion.
Richard L - 06/06/2016


by:

Went on fairly easy, took about an hour. Of course would have been way easier on a lift, but very doable in the driveway. Highly recommend having a second person to hold it up till you get a couple nuts started. My daughter filled in there. The real test will be next weekend, hauling a small rental trailer 160 miles for daughters start of college. One tool you should have not listed on instruction sheet, a torque wrench. Torques are listed for the bolts, very good idea to do that. You don't want this thing coming loose ! I have one so it was not an issue with me, but a lot of people don't.


Comments
We have used it twice, once to college
John S - 08/08/2014

by:
2012 Mazda 3

Fits well. Fits a little loose with my bike rack though. Not sure if it's the bike rack or this that's not fitted properly.


Comments
Like any manufactured product, the inside dimension of the hitch receiver and the outside dimension of the bike racks shank can vary a bit. The receiver will generally a bit larger than 1-1/4 inches, while the hitch accessory shank will typically be a bit smaller. If the receiver opening is on the large side of tolerance, and the hitch accessory shank is on the small side of tolerance, the accessory will fit loosely. An anti-rattle device like part # F-315
Trailer Hitch Anti-Rattle Kit for 1-1/4" Trailer Hitches
$12.91
will work if the bike rack has a hollow shank. If it has a solid shank, something like # RM-061-125
Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches
$33.22
would be a good option.
-- Etrailer Expert Mike L - 09/17/2018

by:
2012 Mazda 3

Installation went smoothly with two people. It is a nice and tight fit so don't tighten bolts down until all of the bolts are in place. On my 2012 Mazda 3 I did have an additional plastic covering that was attached to the bumper supports that had to be removed and was not able to be put back on because that is where the hitch sticks down. I also installed the CURT C56175 wiring harness. This harness did not need a separate power line and hooks up to the wiring in the trunk. To remove the fasteners holding the trunk lining use a small flat screw driver to lift the INNER piece of plastic of the push pin.



by:
2010 Mazda 3

I bought this to tow a 5x8 UHaul trailer from South Carolina to Pennsylvania. I've never installed a trailer hitch before but the video along with the included instructions made it a breeze. My buddy and I had it installed in maybe 45 minutes, and half of that was spent looking for wrenches and jacking the car up. The hitch seems like very good quality.

One thing I'll say is when the hitch arrived it had torn giant holes in the box it came in. Not that I was worried about it getting damaged since it's a giant chunk of steel, but they might want to look into another packaging solution, especially since smaller included items could fall out.



by:
2010 Mazda 3

Product is hefty and strong. The only gripe I have is that it fit extremely tight in the car and I had to hammer it and use a jack to attach it to get it in there. I don't think it is going anywhere but the tolerances could be a little better if I were being picky.



by:
2011 Mazda 3

The hitch arrived quickly even with standard shipping. Installation was not very difficult although I have installed several others on different vehicles so this wasn't a brand new experience. I did install it myself but another set of hand would probably have cut the installation time down a bit.



by:

This item is great and will serve the purpose we need it for. The level of difficulty when installing is the reason for a less than perfect score.



by:
2013 Mazda 3

Showed up right on schedule. Hitch is nicely finished; smooth surfaces, clean edges, and smooth coating. Fit was perfect. I would recommend a second set of hands, although I think i could have done it myself if necessary. (A second set of hands made me more confident about NOT loosing a bolt and plate inside the frame.) The video instructions were very useful. We watched the tutorial, did a dry fit, checked a detail or two on the video, then did the installation. Went smoothly. The wire bolt threaders worked perfectly. (I would recommend you thread them through the bolt mounting holes on the hitch before removing them. Worked good for us.) Needed the rubber mallet for final alignment as suggested. Overall a very positive experience with the purchase and the installation.



by:

This trailer hitch was on my doorstep 2 days after ordering it. Went to a mechanic friend to help install the hitch. New car, so I wanted to take a look under it. Hitch fit like a glove and took less than 20 minutes to install. Just followed the easy instructions,everything you need for installation was included.

Thanks again Andrew



by:
2013 Mazda 3

My car is a 2013 Mazda 3. Took a little maneuvering but the hitch fit to the sub frame of the car. The wires that came with the kit for the bolts and washers work very well took a little bit but was easy to figure out. Sorry no pics was in a hurry to put it on the car. The video from the website really help me out give a great visual on how to put the hitch on to the car. Great product will recommend.



by:
2013 Mazda 3

Hitch seems good so far. Installation was easy, but had an issue with the hitch itself as the receiver tube had globs of weld inside from the chain holders being welded on. The receiver would not slide in all the way to the pin hole. Had a hard time filing down the excess weld to make it fit.



by:

Fits well, works well



by:
2010 Mazda 3

The hitch went on with out to smooth and looks good.The paint on the hitch was flaking off already.Thank you for making a good product and please check into the power coat process.



by:

Easy to install. The directions were good and the mount was perfect for the vehicle. Used for a hitch-mount bike rack and has not warped or deformed at all. Great hitch.



by:
2012 Mazda 3

Very easy to install and the video from etrailer saved me a lot of time! The hitch works as promised on my bike rack.

Thanks etrailer!



by:
2012 Mazda 3

I ordered a trailer hitch with free shipping and I received it within 2 maybe 3 days. I found that to be very quick since I didn't pay to have it shipped. Trailer hitch was good quality and was mounted in under an hour no problems



by:

I haven’t had a single problem with my hitch. Owned it for a year now, and I’ve towed around trailers, boats, everything with my little Mazda sedan. Installation was fairly easy, and I couldn’t be happier.



by:
2011 Mazda 3

Bought this to use for a bike rack. Fit great and required no drilling, only took a half hour to mount. Most of the frame hides nicely behind the bumper cover.


25
58
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch



  • Fit of Draw-Tite Class I Trailer Hitch # 24842 on a 2010 Mazda 3 Sedan
    The Draw-Tite Class I hitch you referenced, part # 24842 is indeed a fit for your 2010 Mazda 3 Sedan. If you click the provided link, you can see our Returns Policy. I've also linked you to the installation instructions and a video showing the hitch being installed on a 2010 Mazda 3.
    view full answer...
  • Is Stabilizer Strap Needed for Bike Rack with Draw-Tite Class I # 24842 on 2011 Mazda 3 Sedan
    You are correct. The provisions of the Draw-Tite Class I # 2482 hitch warranty do not require the use of a stabilizing strap for non-trailer loads like a cargo carrier or bike rack. Keep in mind, the hitch manufacturers punch a stop into the receiver tube of a Class I hitch that will prevent the shank of Class II accessory from being used. This is done because a Class I hitch has a limited tongue weight capacity (maximum amount of weight that can be safely suspended from the receiver)...
    view full answer...
  • Can Inflatable Boat and Outboard Motor be Safely Carried on Aluminum Cargo Carrier on 2010 Mazda 3
    Based on what you have described the aluminum carrier should have no problem handling the 200 pound estimated weight of the carrier and boat/motor combined. You will just need to make sure not to exceed the capacity of the trailer hitch on your 2010 Mazda 3. Since you are right at the hitch capacity it would be a good idea to stow the motor in the vehicle it at all possible. You can reduce the stress on the hitch receiver by also using a stabilization strap such as # 18050, or another...
    view full answer...
  • Recommended Trailer Hitch for a 2012 Mazda 3 i Grand Touring
    I recommend the Draw-Tite trailer hitches for your 2012 Mazda 3 i Grand Touring. They don't require an additional strap like the Curt hitches do when you're carrying a bike rack or cargo carrier. If your Mazda is a Sedan use part # 24842. If it's a hatchback use part # 24843. Both of them install faily easily with included bolts. I've also linked install videos of each of them for you.
    view full answer...
  • Why is a Trailer Hitch Made for 2013 Mazda 3
    We offer hitches for vehicles that our hitch manufacturers have determined there is a demand for. Typically if the manufacturer doesn't recommend towing there will still be some who attempt to do so, but even more relevant for vehicles like yours is that you can carry other accessories like bike racks and cargo carriers. For trailer wiring we do have the # 118420 as well.
    view full answer...
  • Draw-Tite Trailer Hitch for 2010 Mazda 3 Sedan
    I do have a solution for you, however the Draw-Tite # 24843 will not fit a 2010 Mazda 3 Sedan. The hitch to fit your Mazda 3 Sedan is the Draw-Tite # 24842. #24842 is the same hitch as the one you are inquiring about, it's just made specifically for the sedan due to the differences in the rear fascia and its bolting pattern. Which, is the main reason # 24843 will fit the Speed 3 and hatchback models but not the sedan.
    view full answer...
  • Bike Rack Options for a 2010 Mazda 3
    The Swagman XTC 4 bike rack you currently have is not compatible with the Class I receiver, which is the only receiver available for the 2010 Mazda 3. Due to the size of the vehicle, as well as the rigidity of the area where the hitch attaches to the vehicle, the hitch will only be able to safely accommodate 200 lbs of tongue weight, or downward force. In order to make the 2 inch shank on the bike carrier work with the 1-1/4 inch receiver, an adapter would need to be used, but using the...
    view full answer...
  • Will Trailer Hitch Receiver Contact Exhaust on 2012 Mazda 3 Sedan
    I took a look at the reviews of the Curt Trailer Hitch Receiver # C11393 and there was one review that mentioned the hitch bumped the exhaust on rough roads. Due to that, for your 2012 Mazda 3 sedan, I recommend the Draw-Tite Trailer Hitch Receiver # 24842. I went through all of the reviews and didn't find anyone mention the issue about the exhaust, and that is likely because the Draw-Tite has a bit of a different design. The brackets are in a different position from the Curt, and as...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hitch for 2010 Mazda 3 Hatchback
    Unfortunately, we don't purchase used hitches. Your best bet would be continue your efforts to sell your existing hitch and replacing it with the Curt # C11383 class I hitch. Between Craigslist, Ebay and your local online buy/sell/trade groups, you should be able to unload the hitch if its priced right.
    view full answer...
  • Trailer Hitch Availability for 2012 Mazda 3 to Allow Use of Hitch-Mount Bike Rack
    The Draw-Tite Sportframe Trailer Hitch Receiver you referenced, part # 24816, fits the Mazda 3 up through model year 2009, but there is a correct hitch fit for your 2012 Mazda 3 as well. You can use the link provided to see our main page for hitches for the 2012 Mazda 3. Using the Select Vehicle Style drop-down menu at the top of the page you can select the particular version of the 3 that you have. For example, if you have the hatchback you can use # 24843 from Draw-Tite; if you have...
    view full answer...
  • Trailer Hitch and Wiring For 2012 Mazda 3 Grand Touring Sedan
    The trailer hitch I recommend for your 2013 Mazda 3 sedan is the Draw-Tite Class I Receiver Hitch # 24842. The recommended drawbar for this hitch is the Sportframe Drawbar # 3594. I have attached an installation video of this hitch on a similar 2010 Mazda 3 for you. I strongly recommend checking your owner's manual for the towing capacity of your vehicle, but the hitch offers a gross trailer weight capacity of 2,000 pounds with a maximum tongue weight of 200 pounds. You will want a hitch...
    view full answer...
  • Will Draw-Tite Trailer Hitch # 24842 Fit a 2010 Mazda 3 Sedan Regular Touring Model
    The Draw-Tite Trailer Hitch, # 24842, will actually fit the 2010 Mazda 3 sedan Touring or Grand Touring models. I have included a link to the installation details for reference. You will need the recommended ball mount. You can use ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, you will need T-One Vehicle Wiring Harness, # 118420. I have included a link to the installation details and a video showing a typical installation.
    view full answer...
  • Choosing Correct Hitch for 2013 Mazda 3 Sedan
    When you are choosing a hitch, it makes no difference if your Mazda 3 has incandescent or LED taillights as the taillight assemblies have no bearing on the fit of the hitch. The Draw-Tite Class I receiver you referenced, part # 24842 will fit regardless of which taillights your vehicle uses. Grand Touring models of the Mazda 3 are equipped with LED taillights, which will make a difference if you are wanting to install a trailer wiring harness. If you do NOT have the LED lamps, you can...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendations for a 2013 Mazda 3 with or without LED Tail Lights
    Draw-Tite trailer hitch # 24843 happens to fit the 2013 Mazda 3 hatchback with or without LED lights so you can use it. If you have a sedan then use hitch # 24842. It will also fit sedan models with or without LED tail lights. Both of the hitches mentioned are Class I trailer hitches with 1-1/4 inch receivers. This means that you will need a Class I compatible bike rack and you can carry up to 2 bikes maximum. For a bike rack I recommend the Swagman Trailhead, # S63360. It fits the requirements...
    view full answer...
  • Draw Tite Hitch and Thule Doubletrack Bike Rack Recommendation for a 2012 Mazda 3 Hatchback
    For your 2012 Mazda Mazda 3 hatchback you would want a Draw-Tite Hitch part # 24843. The # 24842 hitch that you referenced is designed for sedan Mazda 3s. The Thule Doubletrack Pro XT Bike Carrier # TH92BJ would also work well on the hitch I recommended and would do a good job carrying your bikes in a safe and secure manner.
    view full answer...
  • Draw-Tite Class II # 36416 and Thule Doubletrack # TH990XT for 2009 Toyota Camry
    The Draw-Tite Class II receiver you mentioned # 36416 and the Thule Doubletrack Pro XT # TH92BJ would work very well together with your 2009 Camry. There will be enough clearance between the rack and vehicle bumper for the rack to fold up into its storage position. I have linked you to the hitch install video.
    view full answer...
  • Bike Rack Recommendation for 2010 Mazda 3 Carrying Carbon Frame Bike
    For a carbon frame bike a hitch bike rack that holds the bike by just the tires is the only safe option. Trunk racks all touch the frame which is something you need to avoid with carbon frame bikes. So for a hitch you'd need the Draw Tite # 24843 if you have a hatchback or # 24842 if you have a sedan. For a bike rack I really like the Kuat Transfer V2 Bike Rack for 1 Bike # KU64FR. This is a platform bike rack that only touches the bike at the tires and only weighs 26 lbs. The biggest...
    view full answer...
  • Will Draw-Tite Class I Trailer Hitch Receiver Fit 2011 Mazda 3S with Dual Exhaust
    I verified with Draw-Tite and their Class I Sportframe Trailer Hitch Receiver # 24842 will fit your 2011 Mazda 3S with dual exhaust. I've attached an install video that won't be exactly the same as yours, because it's single exhaust, but it will give you some idea of the process. If you're gonig to be towing and need a wiring harness, the Tekonsha # 118420 will provide a 4-way trailer connector. It plugs into your Mazda's wiring behind both tail lights so there's not any splicing to...
    view full answer...
  • Does Draw-Tite Trailer Hitch Fit 2012 Mazda 3 Sport Sedan With Dual Exhaust
    I checked with the manufacturer for you, and can confirm that the Draw-Tite Trailer Hitch # 24842 will fit your 2012 Mazda 3 Sport sedan with dual exhaust. The exhaust sits far enough back that there won't be any type of interference with the hitch. I have added a link below to a video install on a similar model year Mazda 3 for you to check out of the Draw-Tite Trailer Hitch # 24842. This is a Class I hitch so if you are looking to use it with a bike rack, for example, you will need...
    view full answer...
  • Hitch and Wiring Recommendation for a 2010 Mazda 3
    Depending on the style of your 2010 Mazda 3 we have exactly what you would need for a hitch and wiring. If you have a hatch back you would want the Draw Tite hitch part # 24843 and if you have a sedan you would want the # 24842. If you have the LED taillights you would want the # 119178KIT that is a protected module that draws power from the positive post of your vehicle battery to power the trailer's taillights. If you don't have the LED taillights you would instead want the # 118420....
    view full answer...
  • Trailer Hitch & Wiring For 2011 Mazda3 Sedan
    If so the Draw-Tite Trailer Hitch # 24842 is a great option for your '11 Mazda3 Sedan because it is a bolt-on installation that does not require drilling into your Mazda to install, and is mostly concealed except for a part of the receiver, as you can see by the accompanying photo of this hitch installed on a Mazda3. The correct ball mount for this trailer hitch is the Draw-Tite # 3594 which does come with a pin and clip to keep it secure to your hitch. For a hitch ball, the correct one...
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for a 2011 Mazda Speed3
    There are trailer hitches that will fit the 2011 Mazdaspeed 3, but the Draw-Tite # 24842 will not fit. Instead, you can use the Curt Trailer Hitch, # 11383. This hitch comes with a ball mount, hitch pin and clip. I have included a link to the installation instructions and a link to a video showing a typical installation. If you plan on doing some towing, for a ball you can use # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, use T-One Vehicle Wiring Harness,...
    view full answer...
  • Bike Rack and Trailer Hitch Recommendation for a 2012 Mazda 3i Touring Hatchback
    You can install a trailer hitch with a 1-1/4 inch receiver on your 2012 Mazda 3i Touring Hatchback. The trailer hitch that I recommend for you would be the Draw-Tite Class I Trailer Hitch, # 24843. This hitch was designed for the hatchback models of the 2012 Mazda 3 and gives you the same weight capacities as the other hitch options at the most economical price. I have attached the installation instructions for you to check out. For a bike rack, I also recommend the Thule T2 Bike Rack,...
    view full answer...
  • Recomendado enganche de remolque para 2010 Mazda 3
    Si su Mazda 3 es un Hatchback, recomiendo el enganche de remolque Draw-Tite, parte # 24843. Si su Mazda es un Sedán entonces el enganche de remolque que recomiendo es la parte # 24842. Éstos son atollos de la clase l y tienen una abertura del receptor de 1-1 / 4 pulgadas. Si usted está planeando hacer un poco de remolque necesitará una bola de montaje y bola de enganche. Para un montaje de la bola recomiendo la parte # 3594. Este montaje tiene un aumento de 4 pulgadas y utiliza una bola...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Sarah H
Expert Research:
Sarah H
Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.