Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(221 reviews)
Price: $208.13
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C34ER
Retail:$333.95
Our Price: $208.13
You Save: $125.82
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (221)
- Q & A (0)
- Photos
CURT Trailer Hitch - C34ER
- Class III
- 2 Inch Hitch
- 4000 lbs GTW
- Concealed Cross Tube
- CURT
- 600 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Assembled in the USA
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight : 4,000 lbs
- Maximum tongue weight : 600 lbs
- Not rated for use with weight distribution systems
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13473 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2021 - 2023 Hyundai Santa Fe
- 2021 - 2024 Kia Sorento
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C34ER
Average Customer Rating: 4.9 out of 5 stars (221 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Chilla04/08/2022
2022 Hyundai Santa Fe
Box came damaged but the hitch was not. I watched the installation videos for this and the Drawtite and decided on the Curt per the recommendation of better fitment. The install video made installation a breeze. I had one issue not with the hitch but one of the threaded holes in the frame it was whacked. It took a minute but I was able to tap out the hole and get the hitch installed. I like the fact that the frame of the hitch is hidden behind the bumper and I have plenty of room for my bike rack. Nice addition to my 2022 Santa Fe.
by: Scot03/09/2024
Installed on 2009 Honda Accord with V6. Piece of cake to install. I just use it for a bike rack that I already had. But note that I had an identical car with the 4 cylinder and I purchased the corresponding wiring harness and installed at the same time as a hitch on that vehicle as well, and I pulled a small trailer with a dirt bike for a couple of years. It worked out just fine. Never had any issues. High quality hitch and components. etrailer has always been really good to me.
by: Scott03/29/2024
Kia Sorento
Bought this Hitch Receiver for a KIA Sorento Hybrid and it was perfect. Easy to install myself with Video instructions from etrailer. Definitely will buy here again next time I need hitch supplies!
by: Jonathan02/29/2024
2023 Kia Sorento
Fastest shipping I have ever seen for free. Legit 2 days, completely free!!! Amazon could learn something from etrailer! Shipment tracker was also insanely detailed. Even more detailed than the native UPS website. Haven’t even installed the hitch yet but just from the shipping time on a big item they get 5 stars right off the bat. I’m sure installation will go super easy because they have videos for every item I ordered. Not just general videos but vehicle specific, right down to the year and trim! If you couldn’t tell, I’m insanely satisfied with etrailer so far and I haven’t even installed the hitch. Seems like a fantastic site! Also the hitch is Curt so it wouldn’t be a review on etrailer since it isn’t their brand. Unpacking it tho, everything looks great. Look forward to the install.
by: Benjamin 02/24/2024
Hyundai Santa Fe
Works just as advertised. We use it for a bike rack and it works flawlessly. Took 40 minutes to install. Highly recommended for the 23 Hyundai Santa Fe.
by: Jeff 04/19/2024
Kia Sorento
Paid an installer to put it on and it has worked great on my 2023 Kia Sorento. Zero complaints.
by: Ryan04/28/2022
Easy to install great instructions and video
Ryan
4/29/2023
Works great no issues fits the car well
by: Russ01/13/2024
Trailer hitch and harness installed easily as promised and have had no issues as of yet, one year later. We installed in my daughters SUV to move her from WI to Texas.
by: Joelo07/19/2023
2022 Kia Sorento
Super easy to install thanks to their installation video. Perfect fit, installed under 30 minutes.
by: Scott 10/06/2022
2021 Hyundai Santa Fe
Perfect fit. All you need is a floor jack to assist holding in place. Don't force bolt. Use your fingers!
Scott
10/24/2023
Excellent. Easy fit on 2021 Santa Fe Turbo
Mike L.
11/11/2023
@Scott We're glad to hear your Curt # C34ER receiver hitch is working well for you!
by: Mel 10/05/2023
At this point, the installation is complete. I liked the prompt shipping (plus free). The hitch appears to be as advertised. Also it doesn’t interfere with my spare tire removal (hopefully unnecessary activity)
My objective with this hitch is to carry my two E-Bikes to various locations. At 50 plus pounds each, I needed a stout hitch. Your recommended weight capacity rating should be sufficient.
I’ll remain optimistic until proven otherwise.
** A side bar note of interest to me, I have several family members living in the Wentzville MO area, they will be anxious to hear my reviews of a local company, as time passes.
by: Arlen 09/27/2023
Installer said no issues with install. Looks very good on car. I like that the hitch does not protrude way beyond the bumper. Use this hitch for a e-bike rack.
by: Travis08/03/2023
Simple and straightforward directions but install not so easy. Two man DIY. Took an hour. The passenger side arm of the hitch is difficult to access even with the muffler out of the way. The way the arm of the hitch is made creates a difficult job in getting a hand torque wrench in the right position. The E trailer video shows you how to do the driver side which is really easy and they skip the pain in the butt passenger side. you have just a few inches of sweet spot to get a torque wrench in there. The way it’s made creates a backstop that prevents you from using a long extension. If you have an automated torque wrench like the one they use in the video, it should be fairly smooth but if you buy hand torque wrench like I have, it’s more difficult. Not impossible but you’ll spend some time getting it tight. One of the side bolts I could not get a full 60 pound torque due to angle. You will need a little extension to the torque wrench of just a couple inches. Almost impossible to do it without an extension, and most extensions are too long. Overall, I would do it again as it is very straightforward, but I definitely would borrow or buy an automated bent neck torque wrench for the passenger side bolts especially the two side bolts.
by: Andrew 07/26/2023
The product fit very well and no rattles or shakes. I did not need to get the dealer hitch with the wiring as I use this for my bike carrier. Great quality and I have purchased 3 trailer hitches so far. Great Value
by: Keo03/16/2022
Super easy to install. Super easy. They have a insulation video on the webpage that shows step-by-step how to do it. I didn’t even need to lift my car off the ground to put it on. Just tested it out this weekend on a camp out where I attached a cargo carrier and bike rack in one. It put a lot of torque on the hitch especially when you hit dips on the freeway going 70. The hitch didn’t budge. Now I just need to get heavy duty shocks.
Keo
3/17/2023
Still going strong a year later after many many camping trips and cargo loads. Still need to get those shocks or a lift kit or something.
by: Ron09/13/2021
2021 Kia Sorento
I decided to not jack up my 2021 KIA Sorento SX and I was still able to install, it took about 2 hours. Although the instructions recommends another person for help to hold it in place, I used my jack stands instead. I really like how the bar is tucked in and hidden with just the hitch showing. Overall I thought installation was quicker compared to my 2016 KIA Sorento SXL and 2019 Chrysler Pacifica Touring Plus S but for those I also installed the wire harnesses. I will purchase it for this vehicle later. My experience with etrailer has been great, their prices and products in my opinion is two thumbs up.
by: James01/19/2024
Easy, one man installation. Fits perfe ctly.
by: 10/15/2023
easy installation with the simple instructions that were included. Completely hidden except the receiver
by: Kevin08/03/2023
The ease of installing this was great. The videos online are essential to an easy and pain free experience. Was able to install in my driveway in less than an hour including the wiring harness. This company is great.
by: Luke 12/16/2023
Hyundai
Installed easily in the 2022 Hyundai Santa Fe
by: Brian04/18/2022
2022 Kia Sorento
The install was super easy and very quick. The hitch hides up under the body and all that is exposed is the area for the receiver. I would advise an extension and both deep well and regular socket head to make the install easier. Doing the install under the car on the ground added a little extra effort but was still easily accessible.
by: Dewey01/27/2022
2022 Hyundai Santa Fe
The hitch receiver was an exact fit for my 2022 Hyundai Santa Fe. 1 hour to install with excellent instructions. Did NOT have to bend Exhaust isolator mount as described in instructions, plenty of clearance. Did not raise vehicle to install. Totally elated with the quality and looks of this product. The rubber cap ( in photos) was not included.
Dewey
1/28/2023
Still completely satisfied. No problems at all.
by: Michael09/17/2022
2021 Hyundai Santa Fe
Great price. Solid built. Easy to install. Very helpful installation videos.
by: Franz 06/12/2023
2023 Hyundai Santa Fe
This is the 3rd trailer hitch that I have purchased from etrailer. They make the process of purchasing the correct product very easy. The installation videos are excellent. The videos are very detailed and step you through the installation process.
25
527
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch that Fits 2021 Hyundai Santa FeYes we do have a hitch that fits your 2021 Hyundai Santa Fe Hybrid with the Curt hitch part # C34ER that fits all models of the 2021 Santa Fe.
view full answer... - Does Trailer Hitch For 2021 Hyundai Santa Fe Fit All TrimsI double checked with the manufacturer, Curt, for you and can verify that the trailer hitch you asked about does fit all models and trims of the 2021 Hyundai Santa Fe. The hitch you need is the following: - Curt Trailer Hitch Receiver # C34ER I have added a link below to the instruction manual to check out as well if you'd like to take a look.
view full answer... - Does Curt Trailer Hitch Fit 2021 Kia Sorento SX X-Line PrestigeI verified with Curt, the manufacturer, that the hitch you asked about does indeed fit your 2021 Kia Sorento SX X-Line Prestige: - Curt Trailer Hitch Receiver # C34ER I have added a link below to the installation instructions as well if you'd like to check them out.
view full answer... - Recommended Hitch And Trailer Wiring Harness For 2022 Hyundai Santa FeI recommend the Class III Curt Trailer Hitch Receiver, # C34ER with a 2" receiver along with the T-Connector Vehicle Wiring Harness, # CU94FR that provides a 4-way flat trailer connector and the etrailer Ball Mount Kit, # 989899. The Curt Trailer Hitch Receiver, # C34ER is a bolt-on installation so no welding is required, and it includes the complete hardware kit needed for installation. We even have a product review and installation video created of this being installed on a 2022 Hyundai...
view full answer... - Recommended Hitch for a 2024 Kia SorentoTo add a hitch to your 2024 Kia Sorento, I recommend the etrailer item # e28AR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity and a 600 lbs maximum tongue weight. I really like the etrailer Hitch item # e28AR because of the way the crosstube is concealed once installed. It mounts behind the rear bumper cover, which leaves only the 2" receiver visible. This not only looks better but...
view full answer... - Hitch for 2021 Kia Sorento HybridI reached out to my contact at Curt regarding your Kia. The Curt # C34ER Class-3 hitch will fit all Sorento trim levels, and Sorento Hybrids. When our page says, "confirmed to fit" it means that the manufacturer or etrailer has physically installed the hitch on that syle vehicle, so you can be assured of a good fit. If there is no fit due to manufacturer error we would happily replace it. If you'll use the hitch for towing, a trailer wiring harness like # C59496 would be needed as well...
view full answer... - Recommended Hitch for 2021 Kia Sorento SX-X-Line and Wireless Brake ControllerFor your 2021 Kia Sorento SX the Curt hitch part # C34ER is a confirmed fit and would be a great choice as it's mostly hidden and has great towing capacities. Then to install the Curt Echo Mobile brake controller part # C51180 you'd need to first install a 4-way like the # TK26FR and then convert to a 7-way with the part # ETBC7L and you'd be set. This would give you both connector styles like you are looking for as well.
view full answer... - Recommended Hitch for a 2023 Hyundai Santa FeThe best hitch for your 2023 Hyundai Santa Fe is going to be the Curt Trailer Hitch item # C34ER. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity, and a 525 lbs maximum tongue weight. If you are planning on towing you will also need a ball mount kit item # C45534.
view full answer...
- 2022 Hyundai Santa Fe Trailer Hitch SetupCurt hasn't been able to obtain a 2022 Santa Fe to do a test fit on, but we've done extensive research on the vehilcle, and have found that the only rear-of-vehicle difference between the 2021 and 2022 models is that they've added an XRT trim level. We can state with certainly that the Curt 13473 which we sell as part # C34ER will fit the 2022 Santa Fe, with the exception of the XRT trim, as we don't know to what degree that's changed the geometry of the rear of the vehicle. For a trailer...
view full answer... - Will The Curt Receiver From a 2021 Hyundai Tucson Also Fit a 2023 Hyundai Santa Fe Hybrid?While the Curt Trailer Hitch Receiver # C13240 will fit your 2021 Hyundai Tucson you will need either the Curt # C34ER or our etrailer # e28AR receiver for your 2023 Hyundai Santa Fe hybrid. Personally I prefer our etrailer # e28AR receiver with the matte black finish. It is also manufactured by Curt so you get the quality you expect with Curt. The Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496 will allow you to wire a 4-way flat to your Santa Fe. This...
view full answer... - Best Trailer Hitch Receiver and Wiring Harness For a 2022 Hyundai Santa FeI recommend the Curt Trailer Hitch Receiver # C34ER for your 2022 Hyundai Santa Fe. This receiver has a hidden cross tube with only the receiver tube itself sitting below the rear fascia. I have linked an installation video below that will show you the installation process if you are interested in installing the receiver yourself. I recommend the Curt T-Connector Vehicle Wiring Harness # CU94FR be installed when you are installing the receiver. It will be easier to connect and run the...
view full answer... - Is Trimming Needed to Install Curt 13473 Class III Hitch on 2022 Hyundai Santa FeAccording to Curt, there won't be any trimming necessary to install their 13473 Class III hitch, which we sell as part # C34ER. If you'll be using the hitch for towing, you'll also need a trailer wiring harness like # CU94FR, a ball mount like # 2753 and a trailer ball like # 19260 for a 1-7/8 inch or # 63845 for a 2 inch ball. I've linked to install videos that you might find helpful.
view full answer... - Is Fascia Trimming Required to Install etrailer Brand e28AR Class III Hitch on 2022 Hyundai Santa FeThere won't be any trimming necessary to install the # e28AR Class III hitch on your 2022 Hyundai Santa Fe. If you'll be using the hitch for towing, you'll also need a trailer wiring harness like # CU94FR, a ball mount like # 2753 and a trailer ball like # 19260 for a 1-7/8 inch or # 63845 for a 2 inch ball. I've linked to install videos that you might find helpful. The hitch video shows the identical Curt # C34ER Class III hitch being installed.
view full answer... - Tongue Weight Capacity of 2022 Kia SorentoFrom what I read in the owner's manual for the 2022 Kia Sorento, the maximum amount of tongue weight that can safely be applied to a hitch installed to the vehicle is 220 lbs. For a hitch, I'd recommend the Curt Class III hitch, part # C34ER. If you'll be towing with the hitch, you'll need a trailer wiring harness like part # TK26FR. For a ball mount, use # 2753 and # 19260 for a 1-7/8 or # 63845 for a 2 inch trailer ball.
view full answer... - Does Curt Trailer Hitch Fit 2023 Hyundai Santa Fe CalligraphyYes, the Curt Trailer Hitch # C34ER fits your 2023 Hyundai Santa Fe Calligraphy.
view full answer... - Best Suggested Trailer Hitch and Towing Accessories for 2022 Hyundai Santa FeBecause its manufactured un the US, I recommend the Curt # C34ER Class III hitch which fits all models of the 2022 Hyundai Santa Fe. For a trailer wiring harness, I'd recommend the Curt T-Connector # 118784. For a ball mount, use # 2753 and # 19260 for a 1-7/8 or # 63845 for a 2-inch trailer ball.
view full answer... - Hidden Hitch that Fits 2022 Hyundai Santa FeThe most hidden trailer hitch we offer for your 2022 Hyundai Santa Fe is the Curt # C34ER which only has the lower hitch opening that hangs below the rear bumper. This makes it the least visible and also helps with ground clearance. I attached a picture of what it looks like installed as well as a link to an install video as well.
view full answer...
- Recommended 4-Way Vehicle Wiring Harness For a 2022 Hyundai Santa FeI recommend the Curt T-Connector Vehicle Wiring Harness # CU94FR for your 2022 Hyundai Santa Fe. This will connect to the factory connector that is located on the driver's side rear bumper. The Curt Easy Mount Bracket # C58001 will mount on the end of your Curt Trailer Hitch Receiver # C34ER and secure the 4-way connector. This way you do not have to drill holes in to your bumper cover to secure the 4-way connector or worry about it dragging on the ground.
view full answer... - Recommended Trailer Hitch and Wiring for Towing With 2022 Hyundai Santa FeThe first thing you will need for your 2022 Hyundai Santa Fe to be able to tow a trailer is a hitch. I recommend the Curt Trailer Hitch Receiver # C34ER. This Class III hitch has a 2" receiver with a maximum gross trailer weight of 4,000 lbs and maximum tongue weight of 600 lbs. Make sure to consult your owner's manual to see what your vehicle is capable of towing. You will be limited by whichever is lower, the vehicle or hitch capacity. It comes with a limited lifetime warranty and is...
view full answer... - Curt Receiver Hitch for a 2022 Kia SorentoYes, we do have a hitch receiver and wiring harness that will fit your 2022 Kia Sorento. I recommend the Curt Trailer Hitch Receiver item # C34ER. This is our highest rated hitch receiver for your Sorento. It has a maximum towing capacity of 4,000 lbs and a maximum tongue 600 lbs. For your wiring harness I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # TK26FR. The T-One connector plugs directly into existing wiring behind your Kia's rear...
view full answer... - Hidden Hitch for 2021 Hyundai Santa FeThe Curt Trailer Hitch Receiver part # C34ER which is a fit for a 2021 Hyundai Santa Fe does indeed have a hidden crosstube design. I have attached a photo of this hidden design for you below as well. If you'll be towing then you'll need a few other items; the Curt T-Connector Vehicle Wiring Harness part # CU94FR and etrailer Ball Mount Kit part # 989900.
view full answer...
- Recommended Trailer Hitch, Trailer Wiring Harness, And Ball Mount For A 2022 Hyundai Santa FeFor your 2022 Hyundai Santa Fe I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C34ER. Curt manufactures their hitches in the US unlike their competitors, so you can rest assured that your hitch has passed numerous quality checks to ensure you receive the best product. Curt's gloss black powder coat finish over protective base coat is known to last longer than other brands and offers a superior rust resistance. This hitch is a simple bolt-on installation with...
view full answer... - Does Curt Trailer Hitch Receiver Fit 2021 Kia Sorento HybridI checked directly with Curt for you, and can confirm the trailer hitch you mentioned does in fact fit your 2021 Kia Sorento Hybrid: - Curt Trailer Hitch Receiver # C34ER This is a really nice choice for a hitch on your Sorento because it is a custom fit that does not require any drilling into the frame to install, and it has a concealed crosstube so that the only part showing is the receiver, allowing your Sorento to maintain its streamlined look.
view full answer... - Will The Curt Trailer Hitch C34ER Fit My 2021 Kia Sorento X-LineYes, I can verify for you the Curt Trailer Hitch Receiver # C34ER, will fit your 2021 Kia Sorento X-Line model.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video by:
Joshua S
Video by:
Jonathan Y
Video by:
Schuyler H
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Michael B
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Bradley B
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Chilla
4/12/2023
A year later and extremly pleased with the hitch!