See what our Experts say about this CURT Trailer Hitch

• Hitch and Bike Rack Recommendation for a 2014 Infiniti Q50
  Right now the only hitch that is confirmed to fit the 2014 Infiniti Q50 is the Curt Hitch part # C11407 that I recommended for Cindy so I would recommend this hitch for you as well. The Swagman XTC-2 # # S64670, offers a few things that have been improved over the Swagman XC-2, part # S64650. Beyond the aesthetics, the XTC-2 offers re-designed and improved wheel cradles that are stronger and position the bikes higher up to provide more ground clearance. The wheels hoops on the XTC-2...
  view full answer...
• Will Draw-Tite Trailer Hitch Fit 2015 Infiniti Q50S
  I reached out to my contact at Draw-Tite who said that they haven't had any reports of fit issues with the 2015 Infiniti Q50S and the Draw-Tite Sportframe Trailer Hitch Receiver # 24931. We have learned that the Curt # C11407 isn't confirmed to fit. Since the Draw-Tite is basically the same design I kind of doubt it will fit either. Aside from that what you'll need to do is check out the dimensional diagrams I am attaching to this page and compare them with your Q50S to see if it matches...
  view full answer...
  
• Why is Support Strap Required with Curt Trailer Hitch Receivers
  Curt requires the Support Strap # 18050 with a number of their hitch receivers like # C11407. The strap isn't required when towing a trailer but only when carrying something like a bike rack or cargo carrier. It's required in order to be compliant with the hitch's warranty because Curt wants the added support when the complete weight of the accessory is on the hitch. The strap is required for you to carry a bike rack on your vehicle. The Draw-Tite Hitch Receiver # 24931 does not require...
  view full answer...
• Comparing Trailer Hitch Receivers For a 2020 Infiniti Q50 To Carry a Bike Rack
  Both the Curt Trailer Hitch Receiver # C11407 and Draw-Tite Sportframe Trailer Hitch Receiver # 24931 that are confirmed to fit your 2021 Infiniti Q50 are very similar both in how they attach to the overall construction. We have been able to install both these receivers on a 2018 Infiniti Q50 and we were able to take measurements of the receivers on the vehicle. Both receivers had a hitch pin center hole measurement of 6" from the center of the pin hole to the rear of the bumper. The...
  view full answer...
• Highest Capacity Trailer Hitch for 2019 Infiniti Q50
  The trailer hitches with the highest capacity for your 2019 Infiniti Q50 is the Draw-Tite Trailer Hitch Receiver # 24931 and the Curt # C11407. These are both class I which has a 2,000 lb towing capacity and 200 lb tongue weight capacity. I should note that since you mentioned the vehicle is rated for 2,000 lbs towing, that would be the limit anyway, as to what you can tow despite the hitch being rated for more. The Class I hitch with a 1-1/4" receiver and will serve your towing needs...
  view full answer...
• Comparing Draw-Tite and Curt Trailer Hitches for 2020 Infiniti Q50 for Bike Rack
  Realistically the Curt Trailer Hitch Receiver # C11407 and Draw-Tite Trailer Hitch Receiver # 24931 that fit your 2020 Infiniti Q50 have only very slight differences, but I would go with the Curt for a couple different reasons. One of which is that the Curt has brackets which angle in a bit more, which means a slightly shorter tube so less is going to show. The Curt also has a collar around the receiver and the Draw-Tite does not. This is going to give it an added layer of protection the...
  view full answer...
• What Parts Are Needed To Transport 250lb Motorcycle With 2016 Infiniti Q50?
  I understand you're wanting to carry a 250lb motorcycle with your 2016 Infiniti Q50, but your vehicle is not rated for that much tongue weight which is why there's only class 1 hitches available. To use your vehicle you'll need to pick up one of those class 1 hitches like the Curt # C11407, and then use it to tow a small trailer with your motorcycle. You'll also need a wiring harness # C56248 and a ball mount # C45521 with a 1-7/8" hitch ball # A-80. While I know this isn't what you were...
  view full answer...
• Using My Kuat NV 2.0 2" Rack With 1 1/4" Hitch Receiver
  We can get a fit that works for you with an added accessory. Your Kuat NV 2.0 Bike Rack for 2 Bikes, part # NV22B, is a 2" bike rack. But your Curt Trailer Hitch Receiver, part # C11407, is a 1 1/4". In order to make this work you will need a hitch adapter. You can fit your 2" bike rack to your 1 1/4" hitch with the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver, part # HTAD. It will work with your Class I hitch receiver to give you the ability to attach 2" accessories to your vehicle....
  view full answer...
• Recommended Ball Mount for a 2018 Infiniti Q50
  The best ball mount for towing a jetski with your 2018 Infiniti Q50 is going to be the Curt Class II Euro Style Drawbar with 2" Ball item # C45552. A Euro-style drawbar is a one piece unit, with the trailer ball permanently welded to the drawbar. It will give you a 3-1/2" rise from the top of the shank to top of ball. This will be helpful considering how low to the ground the Curt Trailer Hitch item # C11407 sits. You will also need the Curt T-Connector Vehicle Wiring Harness item # C56248...
  view full answer...
• Availability of Trailer Hitches for 2016 Infiniti Q70 and Q50
  The only trailer hitch available that is confirmed to fit the 2016 Infiniti Q70 is the Curt Class I # C11111. For the Q50 we have the Draw-Tite # 24931 or the Curt # C11407, both of which are also Class I hitches. Between those two options for the Q50 I do recommend the Curt because it's made right here in the USA. Please just not that Curt does require the use of a stabilizing strap # 18050 with any non-trailer loads like a bike rack or cargo carrier. All of these trailer hitches will...
  view full answer...
• Trailer Hitch and Wiring Recommendation for a 2015 Infiniti Q50
  For your 2015 Infiniti Q50 the Curt hitch part # C11407 has been confirmed as a fit and would work well for you as long as the weight of your trailer when loaded would end up being less than 2,000 lbs total trailer weight and 200 lbs tongue weight. Now you would also need to check the owners manual of the vehicle to determine what the towing capacities are for it and stay under the lesser of the two capacities (hitch and vehicle.) For trailer wiring you would need the # C56248, for a ball...
  view full answer...
• Does Draw Tite Hitch # 24931 Fit 2018 Infiniti Q50
  We have determined that the Draw Tite hitch part # 24931 is a fit for the 2018 Infiniti Q50 although Draw Tite has not made the same determination. Reason being we know the Curt hitch # C11407 does carry over from 2017 to 2018 and this is basically the exact same design so there's no reason it wouldn't.
  view full answer...
• Hitch Confirmed to Fit a 2023 Infiniti Q50 Non-Sport Model to Use a Bike Rack
  We do have a hitch that fits your 2023 Infiniti Q50 non-sport model to use your bike rack. - Curt Trailer Hitch Receiver # C11407
  view full answer...
• Hitch Recommendation For 2020 Infiniti Q50
  Our Class I Curt Trailer Hitch # C11407 will fit your vehicle, and while it is not completely hidden, it protrudes very minimally from the rear of the vehicle. You can also get a hitch cover such as the # 22281 to give it more of a finished look when not in use, as well as protect it from any dust or debris that can enter the receiver tube when left open.
  view full answer...
• Trailer Hitch Recommendation for a 2014 Infiniti Q50 for Bike Rack
  For your 2014 Infiniti Q50 there are only 1-1/4 inch hitches available. 2 inch hitches are generally only seen on vehicles with larger capacities like trucks and SUVs. For your vehicle you would want the part # 24931 for a hitch and then a compatible bike rack with that hitch size. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and...
  view full answer...
• Hitch for 2015 Infiniti Q50 Sedan for Use with Bike Rack
  We do offer light-duty 1-1/4-inch Class I hitches for your 2015 Infiniti Q50 sedan and both products can be seen on the linked page. I suggest the Draw-Tite # 24931 since it offers the very same capacity as the Curt hitch but costs less, and it does not require you to use a support strap # 18050 as the Curt hitch does. In either of these Class I hitches you can use a compatible Class I rack with a 2-bike capacity. Class I hitches cannot handle the weight of more than 2 bikes, even if the...
  view full answer...
• Is the Kuat Sherpa 2.0 Bike Rack Compatible with a 2018 Infiniti Q50
  Although we haven't test fit the Kuat Sherpa 2.0 on a 2018 Infiniti Q50 it should be compatible. Really the only thing you need to check as far as compatibility goes is that there is enough rear bumper clearance for you to fold the bike rack up. The distance from the center of the hitch pin hole to the Sherpa 2.0 is 11" when it is folded down and then is reduced to 7-1/2" when the bike rack is folded up. This should be more than enough clearance and you can verify this by simply measuring...
  view full answer...
• Is the Support Strap Required for Curt Hitch On Infiniti Q50
  The Curt Trailer Hitch Receiver part # C11407 which is a fit for a Infiniti Q50 does not require a support strap. This was once required for all Curt trailer hitches but has since been removed. In regards to using a 1-1/4" to 2" adapter like part # HTAD, this will reduce the hitch capacity by 50%. The support strap won't eliminate the reduced hitch capacity.
  view full answer...
• Best Hitch Recommendation for a 2014 Infiniti Q50
  Yes, I checked with Curt and the Curt Hitch part # C11407 that you referenced has been confirmed to fit your 2014 Infiniti Q50 so it would work well for you. You could also use a bike rack with this hitch as well. The most popular bike rack we carry that would be confirmed to fit this vehicle would be the Swagman XTC-2 part # S64670. This rack has a ton of positive reviews from our customers who have bought it so I would recommend it for you. I attached a review video for you to check...
  view full answer...

Do you have a question about this Trailer Hitch?