Video Transcript for Hands-On with the Brophy Horizontal Pipe Holder for E Track

Randy: Hey guys, Randy here at etrailer.com again. Today we're going to be taking a look at the Brophy horizontal tube inaudible 00:00:06 holder. Now this has been designed to work with the E-track or X-track systems.Fit right in place and it will allow us a good area to store longer items that we might not be able to stand up and down in our trailer or in our garage. See the holder itself offers end side to end side 2" gap there.And then from side to side we're looking at 2". Another measurement you might be concerned with is the overall length in which this is going to stick out. In that case, from the mounting surface to the very end of the holder it's about 3 1/4".Now we have a nice heavy-duty steel construction, you can see there's no flex, no give to it at all.

And if we're going to be using it outside, that white zinc finish, really helps standup against corrosion and help to ensure that we don't have to worry about rusting.One thing to keep in mind, the holders are sold individually. So depending on your needs you may want to pick up two or three of them to cover your gap. Now as far as installation it's like any other E or X-track accessory.You got a release tab, we're going to hold that in, put up into the track, rotate it and then slide it down, that point the tab locks in, we won't have to worry about it coming loose.And then we're ready to get that filled up with whatever those longer items are that we need to have stored, stored. Now when using this with the X-track system, we can also use this as a vertical holder.So we can have it so we can hold those shorter items up and down. So regardless of your needs and the number of them that you're going to need, I think if you have those longer items that are under 2" in diameter that you want to get stored, this is going to provide as a very good solid long lasting solution..