Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
1999 Chevrolet Camaro
We'll connect you with nearby partnered installers who know this exact setup.
Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms
Part Number: 1417-1
In Stock
$670.00
Retail:$742.50
You Save: $72.50
1999 Chevrolet Camaro
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (171)
- Q & A (0)
- Photos
Roadmaster Tow Bar Base Plate - 1417-1
Highlights
- Custom Fit for Your Vehicle: Mounts to existing attachment points
- Ready for Flat Towing: Creates solid frame-mounted points so you can safely tow your vehicle behind your RV.
- Built to Last: All-steel, computer-cut construction with black powder coat resists corrosion and wear.
- Evenly Distributes Towing Force: Crossbar-style design spreads stress across the frame for stable towing.
- Simple Setup: Includes instructions, mounting hardware, and works with quick-disconnect crossbar #910021-00.
- Fixed, Reliable Connection: Non-removable arms provide a secure, always-ready setup for consistent towing.
Features to know about
Built for Reliable Flat Towing: Fixed-Bar Crossbar-Style Design
This setup gives you a solid, no-nonsense connection for flat towing. The fixed-bar design means the front arms stay in place, giving you permanently ready attachment points for your Roadmaster tow bar. It’s a simple, sturdy system that keeps things dependable mile after mile.
Strong Where It Counts: All-Steel Construction with Computer-Cut Precision
Each bracket is computer-cut from all-steel stock for exceptional strength and consistent fit. The black powder coat finish helps protect against corrosion, so your equipment stays looking good and performs reliably over time.
Easy Setup for Existing Tow Bar Systems: Quick-Disconnect Crossbar Compatibility
Already using a Roadmaster tow bar? This base plate works with it when you add the quick-disconnect crossbar (910021-00, sold separately). That setup makes attaching and detaching faster while keeping the connection secure once locked in.
Ready to Install: Hardware and Instructions Included
Everything you need to mount it comes in the kit—hardware plus clear instructions. Bolt the brackets to your vehicle’s frame and you’re ready to roll with a durable flat-towing foundation that integrates cleanly with your existing gear.
Specs
Construction and Design
- Type: Crossbar-style base plate kit
- Arm Design: Fixed-bar design – front arms cannot be removed
- Material: All-steel construction
- Manufacturing Process: Computer-cut for precision
- Finish: Black powder coat finish (durable and corrosion resistant)
- Mounting Location: Attaches to vehicle’s frame
- Visibility: Visible installation
Compatibility
- Tow Bar Compatibility: Compatible with Roadmaster tow bars with use of quick-disconnect crossbar (910021-00 - sold separately)
Included Components
- Included: Instructions and mounting hardware
Origin and Warranty
- Manufactured In: USA
- Warranty: Limited lifetime warranty
1417-1 Road Master Standard Base Plate Kit
This Product Fits The Following Vehicles
- 1998 - 2002 Jeep TJ with standard factory bumper
- 1998 - 2002 Jeep Wrangler with standard factory bumper
Ratings & Reviews
4.7
171 reviews
by:
Jim K
07/01/2013
The product was received as expected. The brackets aligned with all points and bolted up first time. The hardware was great, except two lock washer short (but not a problem as I had extras in my parts bins) and double the number of flat washers (extras for the next project). But is was great to have all optional bolts, washers and nuts supplied. Instructions were easy to follow and complete with one excepting. I need a bracket part from the old brackets and that was not included in the instructions, but was clear as I aligned everything in the pre assembly.
by:
Jim R
08/02/2017
2001
Jeep
Wrangler
The mounts worked well the only problem I had was the directions had the mounts backwards so I had to reverse them to make my tow bar fit correct. The mount are very strong.
Jim R.
8/4/2018
Just got back from a 3,500 mile trip towing our Jeep and had no problems. The mounts stayed tight and worked perfect.
by:
Chris
04/29/2018
2002
Jeep
Wrangler
Very well made and Fit perfectly . Was easy to install ... Good and secure ...I was missing a few washers and nuts ... but wasn't a problem ... just got them at a hardware store and was able to complete the job ... Highly recommend
by:
Larry C
04/14/2017
1998
Jeep
Wrangler
Great service. Fast delivery with standard free shipping. Able to track shiing progress straight to my door. Will buy from etrailer again.
by:
Joe T
01/12/2016
1999
Jeep
TJ
Brackets fit perfectly and are easy to install. For my 1999 Jeep TJ I also needed the adapter bar, RM-025 to fit my Reese tow bar.
by:
Jeff L.
05/02/2013
2000
Jeep
Wrangler
These brackets are just what I needed for my Stowmaster Tow Bar.
Easy application.
Easy application.
by:
Jeep Base Plates
08/04/2013
1999
Jeep
TJ
These were easy to install and exactly what I needed to tow my Jeep.
Bob S.
1/3/2014
Can these base plates be mounted if I have a winch on the front bumper? and do you use holes already in the bumper or have to drill new ones? can a Roadmaster Falcon 2 Tow bar be connected to these mounts?Thanks Bob S.
Patrick B.
1/14/2014
That is all dependent on how the bumper mounts to the vehicle, if it is an aftermarket bumper. If it is the factory bumper, then the bolt locations should be clear. The question then becomes, how wide is the winch and will it interfere with the face of the base plates. There is a link to the instructions on the base plate page, I have linked back to it below. Check out the instructions and they will show you how and where the base plates will mount.
Jeep P.
2/6/2015
These were easy to install and were exactly what I expected. I am very pleased with this product.
by:
Dan
04/18/2015
Fast delivery, great service, right part, n 2 hour installation
by:
Steve M
06/09/2017
2002
Jeep
Wrangler
Everything was there and it fit perfect on my 2002 Wrangler. It took about an hour and a half to install. Great product.
by:
Tom M.
02/08/2012
1998
Jeep
TJ
went smoothly.
by:
WS
11/15/2021
1985
Volkswagen
Vanagon
This thing is a really frustrating. For $xxx it should be a lot better even from the beginning where people understand the install situation. It isn't really a bolt on as step one is cut and grind off the factory tow hook. This isn't mentioned by RM. The instructions are a joke - they mix up front and back all the while telling you to read the instructions closely. And the support is really frustrating. If you have 3 questions with photos, etc, they answer only one question per email. You should stop selling this unit until you install it with a video on some vans of maybe different years and maybe RM will listen to you and update their instructions and as far as I can tell so far the hardware needs at least some different hardware. Until then sell the RM Westy front bumper with Clevises already on it for about the same money.
Sierra K.
11/20/2021
I spoke to my contact at Roadmaster and he said, as this kit is for vehicles 30 plus years old, it does not fit the new systems, verbiage, and formats that are currently used in installations. With this vehicle being an uncommonly flat towed vehicle as well, they are limited to the one vehicle that came into their shop, which was being the model to design the installation instructions. This can lead to little things not being detailed in the instructions.
by:
David K
04/25/2018
1989
Jeep
Cherokee
Very easy to install and well built product. Instructions made the job go smoothly. With the tight tolerance on the backing plate bolt spacing, I had to do a small amount of filing on the 1989 Jeep Cherokee frame holes so that the plates would slide easily through. Other than that, no real problems. As mentioned in the instructions, I had to cut small sections out of the top and bottom of the bumper for the new brackets but the install looks really clean.
by:
Kevin
09/03/2019
installed the tow brackets per the instructions - the pictures in the instructions were small and weren't real helpful so I contacted Customer Service which sent me detailed photos of an installation on a similar vehicle - helped a lot! Thanks! Within a week we were off on a cross country trip down to Mexico, put on 6000 miles and then retorqed the bracket bolts. This is a good product, easy to use, and we've used it pretty hard - no problems so far!
by:
Steve
04/30/2023
1987
Suzuki
Samurai
Remove bumper and front wheels. Bracket B is the only hole to be drilled for installing. Bracket C bolts thru existing steering box bolt hole. Bracket E bolts from main bar A to existing rigging eye in your samurai to anchor and secure the base plate. (See pictures) hope this helps. Only negative for me is the base plate sticks out in front instead of below bumper. All parts needed for installation where in the box.
by:
Ray P
06/27/2023
Perfect fit for my 2005 Jeep Wrangler TJ using a Roadmaster Stowmaster 5000.
by:
David
09/15/2020
Did have to cut off factory tow hook with a hack saw. Straight forward install otherwise and good quality.
David
10/21/2021
Towed it several times and still works great, no problems.
by:
Bob
08/25/2024
Everything is perfect! There was no problem with fit, durability or quality! I am very happy with the products you sent me!
Bob
8/26/2025
It’s been great. I only use it to tow my huntn’ rig and never a problem. I’m 87 now and can load and unload by myself.
by:
Edward Tan
03/14/2014
The product fits perfectly. Installation is somewhat easy except drilling the opening on the frame. The arms are holding down very strong, good quality.
by:
Luis
06/10/2020
I finally have my parts today,I waited 5 Days but I Guess that's How It Is.The Set up was Not Hard at all,I had all the parts to Install it ,And Yes I will buy Again if I Need something else!
by:
Robert
01/12/2018
2002
Saturn
S Series
High Quality Product. Install instructions don't go into enough detail in step by step. A little vague for the Non-Expert installer. Nut Plates provided for rear mounting bolts are wider than the holes available in sub-frame for install. Had to mill sides of pads to get them into the frame for install. No instructions or fish wires to get them into place. Had to manufacture own fish wire system to get the plates in place for install. Once mods were completed and hardware designed and built, installation was pretty much straight forward. I would not consider this kit for a novice installer. Sorry I didn't take pictures of the "wide" nut plate situation and my redesign (width reduction)
Bob
1/13/2019
Install completed and many miles of care free towing behind our motorhome. Fixes suggested made for a simple install. Should be incorporated in future kits. I wont charge for the redesign. :+~ I spent my working life as a mechanical designer builder for a major industrial equipment company.
by:
Ed
09/05/2020
A little scary at first but went on my Geo Tracker easily. Extremely solid once installed. Made the tow from CA to Ohio a breeze. I did have to make some adapters to fit my towbar but that's not the fault of your product.
Ed
9/6/2021
Still on my Tracker, ready to rock & roll whenever I need it.
by:
rick /ny
08/02/2014
Suzuki
Samurai
made strong took about 3 hours my tow hooks on my suzuki samural were bent out so that slow me down a bit i used 5 pound sledge out bang them straight then bolts went in i turn the front wheels to the right so to drill the hole in the frame used small bit then went for larger one work out well follow direction they did work but lacking illustration .works good
Rick N.
8/2/2015
Its good works well
by:
Gary
03/03/2018
Delivery of the products was EXTREMELY fast.
The installation instructions referred to a page with adjustment instructions but the page was not included and I couldn't find the missing page on-line either. Installation was a bit more complicated than I thought it was going to be.
Very sturdy product. It should do a great job for me.
The installation instructions referred to a page with adjustment instructions but the page was not included and I couldn't find the missing page on-line either. Installation was a bit more complicated than I thought it was going to be.
Very sturdy product. It should do a great job for me.
Gary
3/3/2019
The base plates worked perfectly
by:
Jerry
06/09/2018
1998
Saturn
S Series
Very happy with the service I received, and so pleased with the base plate easy to install. Pics soon. Thank you etrailer
Jerry
7/1/2019
I am very pleased with the baseplate and tow bar, I have had zero problems with any of it , so glad I chose etrailer
by:
Joe Mechanical Engineer
06/24/2014
The Real Story - The real story regarding what it takes to install the base is that it takes about 4 hours and . .
- You will need a small sledge hammer to pound the unit into the frame cross tube such that the attach points are solid against the frame and align properly at the center point bottom of the frame.
- You will need to remove the wheels to gain access to the side of the vehicle’s frame for drilling the attach points.
- You may need to jack the car up for ground clearance, to drill the bottom hole.
- I had to cut an access hole through the bumper cover to get the backing plate into the frame channel.
- You will need to pry off the frame mud guard, if your car has one.
- You may need to make a ruler like metal shim to hold the back plate while you screw the bottom bolt.
- A 6 ft pole lever is needed to force the front of the base down and thereby pivot the back flange up to align it to the slot like hole in the frame. This area is critical so make sure the hole you drill is match centered!!
- Drill small attach point holes first to make sure you have sufficient clearance on the back side, for the large washers and proper hole alignment with the base flange
- If it all goes well . . plan on a 4 hour job.
- The base is a real beast and could haul a Mac Truck!
- It is by far the easiest base to install, of any I evaluated.
- Would you recommend etrailer.com to a friend? Oh hell yes!
- You will need a small sledge hammer to pound the unit into the frame cross tube such that the attach points are solid against the frame and align properly at the center point bottom of the frame.
- You will need to remove the wheels to gain access to the side of the vehicle’s frame for drilling the attach points.
- You may need to jack the car up for ground clearance, to drill the bottom hole.
- I had to cut an access hole through the bumper cover to get the backing plate into the frame channel.
- You will need to pry off the frame mud guard, if your car has one.
- You may need to make a ruler like metal shim to hold the back plate while you screw the bottom bolt.
- A 6 ft pole lever is needed to force the front of the base down and thereby pivot the back flange up to align it to the slot like hole in the frame. This area is critical so make sure the hole you drill is match centered!!
- Drill small attach point holes first to make sure you have sufficient clearance on the back side, for the large washers and proper hole alignment with the base flange
- If it all goes well . . plan on a 4 hour job.
- The base is a real beast and could haul a Mac Truck!
- It is by far the easiest base to install, of any I evaluated.
- Would you recommend etrailer.com to a friend? Oh hell yes!
25
171
true
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Base Plate
- D-Ring Kit for Flat Towing a 1998 Jeep TJ with Roadmaster Falcon All-Terrain Tow BarHey Tim, thanks for all of the info! The Roadmaster Kit # 1427-1 on your buddy's Jeep is for a different model Jeep which is why you're having issues finding that for your 1998 Jeep TJ on our site. The equivalent for your '98 TJ would be the part # 1417-1 but requires you to move your factory fog lights 1" for the kit to fit. Since you're wanting to switch to a D-Ring front bumper you'll need the Adapter Kit # RM-035-1 for 1" D-Rings. Please note you'll need to make sure your bumper is...
view full answer... - Available Roadmaster Base Plates for 1998 Jeep Wrangler TJWe have three Roadmaster base plate fits for the 1998 Jeep Wrangler TJ with the u-channel bumper that appear on the linked page. These items are the fixed-install Classic # 1417-1, and the kits with removable arms, EZ5 # RM-521424-5 and the EZ4 kit # RM-521424-4. These different base plate kits are suited to difference versions of the vehicle, as noted. The base plate kits also vary in their tow bar compatibility. There is no tow bar model 5000 but the Roadmaster Tracker tow bar # RM-020...
view full answer...
- Base Plate and Quick Disconnect for the Duncan Towmaster II Tow Bar On a 2000 Jeep Wrangler SaharaThe base plate kit for your 2000 Jeep Wrangler Sahara will depend on the style of front bumper you have on your Jeep. If you have the double tube bumper you will need the Roadmaster EX4 Base Plate Kit, item # RM-521424-4. If you have the single tube bumper you will need the Roadmaster XL Base Plate Kit, item # 1420-1 and if you have the U-Channel bumper you will need the Roadmaster Standard Base Plate Kit, item # 1417-1. To have quick disconnects to use with the RoadMaster Base Plates...
view full answer... - What is the Difference Between a Double Tube Bumper and U-Channel Bumper on a 2001 Jeep WranglerI have included a couple of pictures that show the differences between a double tube bumper and a U-channel bumper. A double tube bumper really is 2 round tubes while a U-Channel is U-shaped (more of a C-shape or a U turned on its side). In the case of base plates you could use # 1424-1 because it will fit U-Channel or double tube bumpers. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle....
view full answer...
- Recommended Parts For Flat-Towing 1998 Jeep Wrangler TJThe base plates you can install on your Jeep depend on the bumper style you have. If you have a U-channel bumper the base plates that will work are part # 1417-1. If you have an off-road bumper with the 1-inch D-Ring bumper mounts then the base plates for your Jeep are part # RM-035-1, and if you have the off-road bumper with 3/4-inch D-ring bumper mounts the base plates you can use are part # RM-035. If you have a double tube bumper I recommend the part # RM-521424-5 EZ5 base plates. For...
view full answer... - Can Other Brand Tow Bars be Used with a Roadmaster Classic Base Plate KitYou can use the Roadmaster Classic Base Plate Kit, # 1417-1, with a Blue Ox tow bar, but you will need to use the Roadmaster Tow Bar Adapter, # RM-032. This adapter also works with the Demco Aluminator, Excalibur, and Kwik-Tow tow bars. If you have a different tow bar check out the chart I attached to see all of the adapters we offer.
view full answer... - Recommended Items Needed To Flat-Tow 2001 Jeep Wrangler With U-Channel BumperMost of the base plates we offer for your 2001 Wrangler do require drilling of the vehicle frame for installation. We do have one kit that does not drill into the frame. It is the Roadmaster Classic # 1417-1. Per the installation instructions this bracket kit is designed to fit on the top and bottom of the bumper and utilizes existing bumper and tow hook mounting points for attachment. If you decide you will drill through the frame I recommend part # 1420-1. When installing this kit you...
view full answer... - Availability of Propane Regulator for 266k BTU for 100 lb TankWe have the MB-Sturgis regulator part # 108221 which is rated for up to 400,000 btu and would work great with your 100 lb tanks as long as you needed low pressure propane or LP.
view full answer... - Tow Bar Base Plates for 1998 Jeep WranglerI believe you are referring to the base plates. The base plates are vehicle-specific, and provide the mounting point on the vehicle for the tow bar. For the 1998 Jeep Wrangler, you would need part # RM-521424-4 if you have the Rubicon, Unlimited, or Double Tube bumper. If your Wrangler has the U-Channel bumper, you would use part # 1417-1.
view full answer...
Do you have a question about this Tow Bar Base Plate?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Isabelle B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim K.
7/1/2014
The brackets have performed as expected, no problems or concerns.