Product Experts Available Now!
Call 1-800-940-8924
Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long - Qty 2
(82 reviews)
Price: $18.41
Wheel Masters
Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long - Qty 2
Part Number: WM80292
$18.41
Retail:$30.01
You Save: 39%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (82)
- Q & A (0)
- Videos (1)
- Photos
Wheel Masters Accessories and Parts - WM80292
- Tire Repair Tools
- Valve Extenders
- Straight Extender
- Wheel Masters
- Silver
These straight valve extenders make it easy to access the valve stems on your tires. Each sturdy, nickel-plated brass tube is 2" long and screws onto your existing valve stem. Includes 2 extenders with caps.
Features:
- Valve extender allows for simple access to valve stem on wheel
- Long, straight tube extends existing valve stem
- Corrosion-resistant nickel-plated brass construction is long-lasting
- Included endcap replaces your existing valve stem cover
- Threaded head on extender screws onto your existing valve stem
- Made in the USA
Specs:
- Length: 2"
- Quantity: 2 valve extenders with caps
- 1-Year warranty
80292 Straight Valve Stem Extenders by WheelMasters - 2" Long - Qty 2
Video of Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Hands-On with the Wheel Masters Tire Pressure Valve Extenders
Randy: Hey guys. Randy here at etrailer.com. Today we're going to be taking a look at some valve stem extenders from Wheel Masters. These are just the straight version. Basically anytime we're dealing with dual rear wheels like this, we usually have an air fitting that's hard to get to. That inner wheel generally doesn't allow itself to be very easily accessible.
You can see on ours here, it's just basically tucked right back in the end there, and while we can kind of get to it to get the cap off the end, it's just not ideal.Generally, when you're taking this cap off, what you'll do is drop it. And then you got to, kind of, get down there and dig in-between and try to get to it. So these are available, this is a three-inch version, but they're available in a two-inch extension or a four-inch extension. You want to be sure you're not using these on a rubber valve stem, they're just too heavy. They'll kind of flop around.
But, see that's a nice steel valve stem that we have there. And by using this extender, we'll just get it started on there, threads on just like a valve stem cap will. Let me get it down, and then it's got that nut on it, we'll use a 7/16-inch wrench for that. You can go in between the tires if you need to, but we don't need to have these super tight, we just want them to be tight enough, of course, where no air is going to escape..Let me see, that's on there, nice and stiff. And then we got that Chrome cap there.
Now we've moved that out either two, three or four inches. It makes it much easier to get to. Now there are other extenders available. This one comes straight out, so this is where we're going to use the straight line. But if you look at this one, you can see with this valve stem here, it points towards the inside.
So that's where like the reverse air chuck, you can kind of get in there, hook onto it and pull out on it. But using a bent extender like this helps us out in this situation. Just depending on what your application calls for. Just allows us to get these out here where it's much more easy to get air into our tires and maintain proper pressure.You can see it's got a nice bright finish to it. It's going to come with the metal cap. In some situations people like to switch the metal cap for just the standard black plastic ones. Sometimes corrosion can be an issue and make these a little tough to get off so just keep that in mind. This is the one that's been on here for probably about a year and a half and you can see the finish is still holding up really well. There weren't any issues with leaks or anything, just like this one here. It's been on there for about a year and a half too and really no major issues with corrosion or discoloration.Overall, guys, I think these are an excellent idea. Anytime we can make it easier to properly maintain our vehicle, we're going to do it more often. When tire pressures get low or if we don't check them often enough, it can cause safety issues. If not safety issues it can cause weird wear on our tires and things like that. So if I had a set of dual rear wheels like this, I would definitely extend them out, make them easier to get to, an easier to maintain.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
Ratings & Reviews
4.7
82 reviews
by:
BAH
04/12/2026
Seem well made These 2" extensions ended up being almost flush with the wheel simulator so I cut a notch in the simulator to make it easier to get the air chuck on it. I think the next longest would have been too long and perhaps could get caught on something.
by:
Jay V
10/01/2017
Definitly American made product and pretty solid. Needed this to be able to extend my current tire valve out past the hub cap port so that I could easily take air pressure readings while travelling in my RV. Before this I would have to remove the hub cap first in order to use my digital pressure guage- NO MORE. Timely delivery and very satisfied! :)
by:
Matt
06/27/2025
Well, these valve extenders are much more beefy than the cheaper China made ones I had purchased over a year ago. Substantially more heft to them, and the internal valve contact point is more sturdy as well. Several months ago one of my cheaper ones failed at the attachment point to my tire valve stem while I was driving. I lost that extender along with the attached TPMS device. Luckily the inner stem held and the tire did not explosively leak out.
Gwendolyn Y.
7/2/2025
Oh no! I'm glad that the inner stem held on till you could get everything fixed up. What kind of rig do you have this on?
by:
Robert
03/10/2026
Working Great on Motorhome
by:
Leonard
07/09/2021
The WM tire valve extension are good quality and work well. The reason I gave it four star is with steel dual wheels I had to use a crows foot and ratchet with a long extension to snug it up on the valve stem on the wheel because the female end of the extension spins like that of a garden hose. So you either have to have small hands to reach through the wheel holes with an open end wrench or remove the duals to get to the inside dual to snug it up or use a crows foot. If the nut would have been on the end just below the extension valve core and the end on wheel fixed would have been much easier for me.
Leonard
7/13/2022
After a year still working as designed.
by:
David
09/22/2024
Looks well made. Checking for leaks over next week.
David
9/23/2025
Great. No leaks. Seems to be very high quality.
by:
Billy
12/20/2025
Not long enough
by:
Mike
10/30/2022
This will definitely prevent the hidden valve issue on the rear dually’s when the original valve stem floats behind the wheel and is not accessible.
Mike
10/31/2023
Product is holding up as expected. Still tight and no leaks best if all ! Solid product if you want to be able to access your valve stem with ease and keep the air pressure checking simple. No more floating , hidden valve stems !!
Mike L.
11/15/2023
@Mike We're glad you're happy with them!
Mike
11/15/2023
No more hidden valve syndrome when checking my air pressure, THANKS !!
by:
Pappy T
04/28/2025
Good stem extensions, solid so no seam leaks .
by:
Cesar
08/05/2022
Just received them and haven't tried them yet but they seem to be well made. Also was pleasantly surprised to see they are US made - always willing to pay a little more for American made products. Etrailer's follow-up is top notch, keep up the good work.
Cesar
8/6/2023
They work very well, highly recommend especially for very short factory valve stems when the air chuck will not seat properly.
by:
Donald
02/25/2024
Stems work perfectly. Nice to be able to do my own tire check before I hit the road.
by:
Jeff
09/18/2024
Good product. Works with TireMinder i10. Attaching bracket to the center hub required a small right angle drill attachment.
by:
Steven
11/04/2025
Very high quality
by:
Donald
06/26/2018
Going to use these on 5th wheel trailer. Previously had gotten some made in China and they were poorly constructed with much thinner metal, easy to break and totally not trust worthy so I ordered these. These are well made and should last for a long time. Much heavier metal construction and much more robust internal components. Go USA, well worth the extra money. And etrailer has the best price for these extenders.
by:
Dymphna
10/22/2023
When I called customer service the woman was helpful and understanding. I was amazed the two times I called, later in the day I received a callback with updates. The USPS was the problem not etrailer. I received my package and I’m thankful for the wonderful service that was provided.
by:
Thomas
10/29/2025
As usual great product at a good price and delivered quickly.
by:
Raul
08/07/2019
I have bought numerous valve stem extenders, over time. While they are simple, some don't make proper contact, others leak, others simply don't work.
The etrailer product is the BEST valve stem extender. Quality, quality quality.
The etrailer product is the BEST valve stem extender. Quality, quality quality.
by:
Richard
12/25/2019
I used these to extend the valve stems to make it easier to check and inflate tires.
by:
Dale
05/21/2023
I always like ordering from eTrailer, there was quick to respond and quick to suggest something else. The original part I ordered would not have come in until after I had left my current position. They offered something else within 5 minutes. We've changed the order and it was on its way. Definitely, I would always order from eTrailer when I can
by:
Barry
11/16/2020
installed one of them and it seems to hold pressure and not leak-that is the main thing I was lookin for. I was also looking for a longer threaded end so my quick connect chuck could be used without any problems and it fits the bill there also.
by:
Mark
02/14/2022
Friendly customer service. Prompt shipping. To cold to install so I cant tell you if they work.
by:
Bruce
07/14/2023
ETrailer is our go-to for everything trailer, tire, etc! They always surpass expectations!! Excellent service....Fas delivery!
by:
Frank
10/22/2022
Its always a pleasure to work with etrailer.com. They are always helpful with every need I have ever had. Thanks
by:
Eddie
05/09/2024
Fast delivery, worked well. Installation was fast.
by:
Nicholas
09/18/2022
I bought here because product was made in USA. Not to mention it was shipped right away.
25
82
true
Show More Reviews
See what our Experts say about this Wheel Masters Accessories and Parts
- Valve Stem Extension Recommendations for RV with Dually WheelsHey Danny, If you're needing valve extensions for your dually trailer tires, we've got a few different options for you. I do recommend using the Wheel Masters brand valve extensions because they confirmed that these will work with the rubber valve stems. They do recommend using the Wheel Masters Support brackets for Rubber Valve Stems part # WM8029VS in addition to the extension to support the rubber stem since they can be flimsy. A 45-degree bend valve extender like the # WM8029 is...
view full answer... - Is There A TPMS Valve Stem Extension Shorter Than 2" From etrailer?Hey Paul! The 2" is pretty much the smallest valve stem extension we have, such as Wheel Masters Tire Pressure Valve Extenders # WM80292 you were looking at. Now we do actually have one that offers a straight extension of about 1-1/2", then has a 45 degree bend. So it ends up being around 2" or so total after the bend. The part number for that one is # WM8029 in case it happens to look like a better fit for you. I went out to our warehouse to grab a pic for you. Let me know what you...
view full answer... - Are Wheel Masters Tire Pressure Valve Extenders Compatible With TST TPMSHi Kevin; the Wheel Masters Tire Pressure Valve Extenders # WM80292 are compatible with TST TPMS systems like the # TST-507-RV-6-C. If you need anything else feel free to reach out in the comments below.
view full answer... - Recommended Valve Extenders for a 2016 Ford F-450 Cab & ChassisThank you for the picture that really does help figure out what'll be best for you. It appears for your right/left rear outside tires, you could benefit from an extender that has a bend in it, like the Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend # WM8029135. For your inside tires, I'd recommend going with a simple straight extension like the Wheel Masters Tire Pressure Valve Extenders - Straight # WM80293 which measures 3" long. We also have those straight extenders...
view full answer...
- Recommended Valve Stem Extention for a Ford E-450 Class B Motorhome Yes, you can. The Wheel Masters Tire Pressure Valve Extenders item # WM8029 you were looking at will not affect your factory tpms. I have linked an installation and review video below. Here are some other options for valve extenders: Wheel Masters Tire Pressure Valve Extenders - 90-Degree Bend - Front Wheels - Qty 2, item # WM802990 Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend - Steel Rear Wheels - Qty 2 item # WM8029135 Finally, the Wheel Masters Tire Pressure Valve...
view full answer... - Valve Extenders For Motorhome That Can be Used With TPMSWe do have solid valve extenders for your motorhome that can be used with a tire pressure monitoring system, and come in different lengths, depending on what you need, the Wheel Masters Tire Pressure Valve Extenders - 2" Long # WM80292, 3" Long # WM80293, and 4" Long # WM80294. If instead you were referring to an inflation kit for a dually, the only options we offer are indeed the braided style: - Wheel Cover Mount: Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually # WM8208 -...
view full answer... - TST Tire Pressure Monitor Sensors for a Ford F-450 DuallyRegardless of whether you go with the cap style or flow through, they use the same monitor so you should be good to continue use with your current monitor. I would recommend sticking with the flow through sensors like the Flow Through Tire Sensors for TST TPMS # TST-507-FT-S2 that you already have if they can fit your dually wheels. Since you already have some, you could remove them and test fit them first. Pretty much all valve stems have at least some rubber on them, more than likely...
view full answer... - Do I need Metal Valve Stems for Flow Through Tire Sensors?To use the TST TPMS 4 Flow Through Tire Sensors item # TST-507-FT-4 or 6 Flow Through Sensors item # TST-507-FT-6-C you will need to swap out your rubber valve stems with valve stems that are steel, chrome or nickel. You can use the Americana Metal, Bolt-In Valve Stem item # AM20906 which fits either of the standard hole sizes of 0.453" or 0.625" and is made of chrome-plated brass. You won't be able to use just the metal extensions, like item # WM80292 you were looking at, with these tire...
view full answer... - What Tire Pressure Valve Extenders Work with the TireMinder i10 TPMS for RVsWhen using the TireMinder i10 TPMS for RVs # TM29FR, it is recommended to not use valve extenders. Obviously this is not always possible. But the manufacturer does state that if you do need extenders, you should use straight extenders that are steel or brass. They do state not to use braided extenders, for the reasons you mentioned. You would need extenders like those below: - Wheel Masters Tire Pressure Valve Extenders # WM80292 (2") - Wheel Masters Tire Pressure Valve Extenders # WM80293...
view full answer...
- 135 Degree Valve Extenders that are 3 inches Long for DuallyWe don't have any 135 degree valve extenders in that size but you could use the part # TM84SR and the 2 inch extension part # WM80292.
view full answer... - Tire Pressure Valve Extenders for Dually Tires it really depends on how long of an extension you are needing for your 2021 F-350 Dually. We have the Wheel Masters Tire Pressure Valve Extenders 2" item # WM80292 you were looking at. We also have a Wheel Masters 3" extension item # WM80293, or a 4" extension item # WM80294. All of these valve extenders work with tire pressure sensors and are great with dually style tires.
view full answer... - Short Valve Stem Extention For Ford E-450 Front Wheel Tire Pressure Monitoring SystemFor a short extention we have a few option for your Ford E-450 with different degree bends to suit your needs. Without knowing what system you have, I'll give you options for you to compare. The Wheel Masters Tire Pressure Valve Extenders - 45-Degree Bend - Front Wheels - Qty 2, # WM8029. Wheel Masters Tire Pressure Valve Extenders - 90-Degree Bend - Front Wheels - Qty 2, # WM802990. Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend - Steel Rear Wheels - Qty 2, # WM8029135 Finally,...
view full answer... - Availability Of Valve Stem Extensions For 2006 Dodge Sprinter 3500 With Dual Rear WheelsI would be happy to help! For your 2006 Dodge Sprinter 3500 DRW you will need the 4" extenders # WM80294 and the 90 degree extenders # WM802990 to get the 5" extension you are wanting with a 90 degree bend. We do not have anything that will secure these extenders to your wheels, so you will need to be a bit creative. Using a metal valve stem # AM20906 instead of rubber would be the best option for these extenders. For the outer wheels it really depends on how long of an extension you...
view full answer... - Identifying Valve Extender For Outside Dually Wheel To Bring Tire Valve Where it Can Be UsedIt appears to be one of the 180-Degree Wheel Masters Tire Pressure Valve Extenders # WM8029180 which was then bent back out to accommodate the opening for that wheel. We do also have the 135-Degree Extenders # WM8029135 which may work depending on your exact application. Kits like the Wheel Masters 4-Hose Inflation Kit # WM8001 are great to get the fill points further out towards the center of the hub and more easily accessible.
view full answer... - Tire Valve Extension for Rear Dual Wheels on a Semi The Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long item # WM80292 can be used in any application where a straight 2-inch tire pressure valve extension is called for. These extenders are made of solid brass that is nickel plated for corrosion resistance. We also offer valve extenders in other lengths 4" item # WM80294, 3" item # WM80293, and the 90-degree extenders item # WM802990.
view full answer... - Do Wheel Masters Tire Pressure Valve Extenders # WM80292 Depress Original Tire Valve at All TimesThe Wheel Masters Tire Pressure Valve Extenders # WM80292 do depress the original valve on the tire at all times once they are installed. Their Schrader valve on the extender then becomes the stop-point for the pressure in the tire. This part consists of two extenders with caps.
view full answer... - What is Max PSI Wheel Masters Valve Stem Extenders Can HandleWe've checked with Wheelmasters in the past and they have told us their valve stem extenders like the part # WM80292 are rated for up to 160 psi.
view full answer... - Are Wheel Masters Tire Pressure Valve Extenders WM80292 Compatible With TPMS Sensors?The Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long - Qty 2 # WM80292 you were looking at are indeed safe to use with a Class A motorhome with TPMS sensors. I included a video of the # WM80292 for you to take a look at.
view full answer... - Compatibility of Wheel Masters Airless Inflation Kit # WM80092 with Tire Pressure Monitoring SystemsAccording to my contact at Wheel Masters, the 80092 wouldn't be compatible with TPMS systems, because there's no air in the tube. Using a regular extension like # WM80292, # WM8029 or # WM802990 would be a better choice, as they're compatible with TPMS systems.
view full answer... - Recommended Tire Valve Extenders for Dually PickupsI have some great options for tire valve extenders, the good news is that they are universal in designed so all you really need to do to find the correct ones is determine the length you need along with the angle. The Wheel Masters Tire Pressure Valve Extenders - 45-Degree Bend part # WM8029 and Wheel Masters Tire Pressure Valve Extenders - Straight part # WM80292 are both great options. I have attached our full list below.
view full answer... - Recommended Valve Extenders For The Exterior Dual Wheel Of A 2003 Gulf Stream MotorhomeWe have a variety of options when it comes to valve extenders, the real question is what angle are you needing the valve to be at to make it easy to access? For just the exterior dual wheel you can use shorter extenders like a Straight 2" # WM80292 or even a 135-Degree Bend # WM8029135 if you're needing a bit of an angle to get through the wheel handholes. If you're wanting more of a hose style you would technically need to get a full kit like the # WM8001 you were looking at to get the...
view full answer... - Rear Wheel Liners For 1987 John Deere MotorhomeThe Wheel Liners confirmed to fit your 1987 John Deere Motorhome are only available in the complete front and rear package # NA7195D0. You may also want the Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long - Qty 2 # WM80292 to allow you to access the inflation valves easier.
view full answer... - How To Add Length to Firestone Inflation ValvesThere is an option for you to add length, though there are no longer than standard valves. So what you could do is add a valve extender to the Firestone Inflation Valve for 1/4" Tubing # F3032-1. You would be able to add length by utilizing the Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long # WM80292 or 3" Long # WM80293.
view full answer... - Does the Nut on the Wheel Masters Tire Pressure Valve Extenders # WM80292 Freely RotateThe nut on the Wheel Masters Tire Pressure Valve Extenders # WM80292 freely rotates to make installation and removal easier. If you check out the attached review video you can see this process being done.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Leah B
Video by:
Zack K
Video by:
Jonathan Y
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Video Edited:
Kathleen M
Written by:
David L
Installed by:
Shane T
Installed by:
Randy B
Updated by:
Wilson B
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jay V.
10/1/2018
Still great! I did put a small piece of tubing around them to prevent squeeks against the cap...just a small mod...