When your trailer is carrying serious weight, the Vesper Steel 10-Spoke Wheel delivers dependable strength. This 15" x 5" rim is rated for 2,160 lbs and uses a 5 on 4-1/2" bolt pattern with a 3.31" pilot diameter. The steel construction offers solid support for heavy-duty hauling, giving you confidence every time you hit the road.
Loose lug nuts are a problem you don’t want on the highway. This wheel’s automotive-rated center disc and beveled, uncoated stud holes provide better clamp force retention so the wheel stays tight without constant re-torquing. It’s a smart design that helps keep your setup secure mile after mile.
Corrosion can ruin a good wheel fast, but this one is built to last. The white acrylic enamel finish goes over a zinc phosphate pre-treatment and e-coat primer layer for excellent corrosion resistance—tested to more than 1,000 hours in salt spray. It resists chips from debris and scrapes from curbs better than typical powder coat finishes, keeping its clean look season after season.
Getting set up is straightforward with this standard 5 on 4-1/2" bolt pattern and 1/2"-20 wheel bolts. The included valve stem means one less part to source before installation. It’s an easy choice when you want a durable steel wheel that’s ready to mount and get moving.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors. Steven here with etrailer.com. Today we're looking at this Vesper Steel 10-spoke trailer wheel. It's a 15 by five inch and it's a five on four and a half inch lug pattern. Now, if you're not sure, on a odd wheel lug pattern, you need to measure directly across from the center of one lug hole diagonally across in between the center of the other two at the opposite side. Just like this image on the screen, that red line, that's how you're gonna measure that and make sure you're getting the right one for your specific application.
Now, getting into the wheel itself, again, it's a nice sturdy steel wheel with a 10-spoke design. So these 10 triangles going around there, that's what they consider that 10-spoke design. It's super durable. It's got a nice corrosion-resistant white acrylic enamel finish that's gonna resist chipping and other damage, and it's a lot better than powder coat finishes. And this finish is actually applied after they've already applied a zinc phosphate pretreatment, and then they cover all that up with an E-coat prime layer.
So it's a very, very nice corrosion-resistant. And it's also got a nice salt spray rating of more than 1,000 hours. Now the backside, they don't double coat that, just the side you see, but this still does have that first layer of finish on it as well. Now, it also has what's called a improved torque retention technology. So when they designed this wheel here, that technology helps to keep the wheel accurately and securely in place whenever it's installed.
Now, the stud holes are uncoated and they're beveled to offer a better clamp force retention. As you can see, the valve stem is included and the wheel meets all SAE J1204 standards. So again, folks, it's a 15 by five inch wheel. The bolt pattern, again, is a five on four and a half, and this pilot hole diameter is 3.31 inches. It's got a nice rating of 2,160 pounds and a very nice two-year limited warranty.
Now, the wheel bolt size where the studs go through, that's considered a half inch hole or a half inch by 20. Well folks, I think that's gonna wrap it up for our look at this Vesper steel 10 inch. or 10-spoke trailer wheel. Again, a 15 by five inch wheel with a five on four and a half inch lug pattern. I'm Steven, thanks so much for your time. Thanks for watching, have a great day.
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
Ratings & Reviews
As advertised. Fast shipping.
Do you have a question about this Trailer Tires and Wheel?
Condition: Surface Scratches
Notes: Item has minor cosmetic chips and scratches along the edge. Otherwise new and unused.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.