Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling gear, you want a wheel that can handle the weight without worry. This 14" x 5-1/2" Aluminum Sendel Series T07 wheel is rated for 2,200 lbs and meets DOT specifications for safety and performance. The aluminum build keeps it lightweight yet strong, giving you dependable support mile after mile.
Moisture and road grime won’t get the best of this wheel. Its aluminum construction is naturally rustproof, and both the front and back are clear coated for long-lasting protection. Whether it’s rain or salt spray, the machined black face and V-spoke design stay looking sharp season after season.
Getting the right fit is simple thanks to its standard 5 on 4-1/2" bolt pattern and 3.19" pilot hole diameter. The zero offset keeps the wheel centered on the hub where it should be. It uses a 1/2"-20 wheel bolt size for a secure connection that stays tight on the road.
Even under heavy torque, this wheel holds up strong. Steel inserts protect the lug nut holes from wear and prevent galvanic corrosion between metal surfaces. It’s a small detail that makes a big difference in long-term reliability and keeps your setup solid over time.
The black machined finish gives trailers a clean, updated look that stands out without being too flashy. If you want to complete the setup, center caps like the # AM90175 or # 319EZ and valve stem # AM20904 are available separately to match your needs.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this 14 inch x 5 1/2 black machined aluminum Sendel series T07 trailer wheel, with the 5 on 4 1/2 inch bolt pattern. Now, this is an aluminum wheel, it's very durable, very lightweight and rust-proof. And this is the Sendel Series T07, which is a 5 V-spoke design wheel. I want to zoom in to show you a close up of it. You notice it is a, has a nice glossy black finish to it, and then they machine faced the spokes to give some shine to it.
Now, the front and the back of the wheel is clear coated to protected the wheel from scuffs and scratches. And this is a high quality wheel, does meet the DOT, Department of Transportation's specifications. Now, this wheel does not come with a center cap. If you do want one, we do sell them separately on the website. If you do purchase a center cap, you do want to make sure the diameter on that center cap is 3.19 inches, which is the diameter of this pilot hole that the cap goes through.
A few specs on this. We're gonna measure the diameter, and the diameter will always be measured inside the inside on the wheel. So if we put a ruler on it, it'd be right at 14 inches. The width is the same way, inside to inside or beat seat to beat seat. And that'll be right at 5 1/2 inches.
The bolt pattern on this wheel is a five on 4 1/2 inch bolt pattern. And if you wanted to measure that on a wheel, that's an odd number of lugs, like in this case, five, what you want to do is pick any hole, let's say this one, and then you'll measure across to either one of these holes but when you measure it, is from the center of the starting hole to the furthest edge of the hole that you measured to. So on this it'll measure 4 1/2 inches, so it's a five on 4 1/2 inch bolt pattern. This wheel does use a wheel lug size of a half inch by 20 and the weight capacity on this wheel is 2,200 lbs. But that should do it on the review of the 14 inch x 5 1/2 inch wide black machined aluminum Sendel series T07 trailer wheel, with the five on 4 1/2 inch bolt pattern..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Bob
10/9/2022
Two thumbs up!!
Richard
9/25/2024
The wheel was for a match to my trailer and it has never been on the ground yet but looks amazing.
Do you have a question about this Trailer Tires and Wheel?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob K.
7/11/2023
They still look great and I’ve added stainless steel fenders from you as well. The fenders weren’t packaged very well and had some small scratches on them , but overall I love the new look