No need for extra mounting time or shop stops. This setup comes pre-mounted and aired up, so it’s ready to install as soon as it arrives. The ST205/75R15 Kenda Karrier KR53 tire is already seated on a 15" galvanized steel spoke wheel with a 5 on 4-1/2" bolt pattern, making it a simple, reliable way to get rolling again fast.
When you’re carrying serious gear day after day, dependable load support matters. This Load Range C tire is rated for up to 1,820 lbs at 50 psi—plenty of muscle for everyday towing without stretching its limits. The sturdy radial construction runs cooler and wears more evenly, keeping performance consistent mile after mile.
Long trips and summer heat can be tough on tires. The KR53 tread design and radial build help reduce heat buildup while maintaining steady tracking on the highway. That means dependable grip and smoother handling whether the pavement is hot, slick, or rough from the miles ahead.
Moisture, salt, and weather can take their toll on a wheel—but not this one. The 15" galvanized steel spoke rim resists rust and corrosion, keeping it looking good and holding strong through humid summers or coastal air. It’s the kind of durability that pays off season after season.
If the tire fails under normal use in the first year, Kenda replaces it—no hassle. Add in a limited 2-year warranty on the wheel, and you’ve got a combo built to earn your confidence right from the first haul.
If the tire fails under normal use in the first year, Kenda will replace it. That's confidence you can count on, whether you're heading to the jobsite or the campsite.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a real quick look at this Kenda Karrier KR53 ST205 75R15 radio trailer tire with this 15-inch galvanized spoke wheel. Now, this radio tire comes pre-mounted on this 15-inch galvanized steel spoke wheel with a five on 4.5-inch bolt pattern. So whether you're replacing a worn set up, or you're prepping for a new trailer, you're gonna save time and skip the hassle of separate mounting and inflation. The low weight design of this KR53 tire helps improve fuel economy on longer trips, and the highway-friendly tread is going to keep your trailer tracking steady and straight. So this is gonna be ideal for both short hauls and cross-country travel.
The radial construction of this tire is gonna help reduce heat buildup and promote longer tread life, especially on extended trips. As I mentioned at the beginning of our time together and as we have stamped here on our tire, this is an ST205 75R15. This is a load range C tire, meaning it has a 6-ply rating. The maximum load capacity is 1,820 pounds at 50 PSI. And this has a speed rating of N, indicating a maximum speed of 87 miles per hour.
So this galvanized spoke steel wheel will obviously resist rust and corrosion. This is gonna be great for your boat trailers and harsh weather conditions. The measurements of our wheel, looking at the diameter first, measuring beat seat to beat seat is 15 inches. The width of the wheel is six inches. The bolt pattern is five on 4.5 inches.
And in case you don't know, the first number of the bolt pattern is the number of bolt holes. Second number is the diameter in inches of the circle from which the bolt holes sit. So to determine the bolt circle diameter on wheels with an odd number of bolt holes as we have here, you're simply going to measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. The wheel stud size is 1/2 an inch by 20. The wheel capacity is 2,150 pounds.
This does not include a center cap. But if you decide to pick one up, you just wanna make sure that it fits the pilot diameter of 3.19 inches. Now, if you do pick this up, we would love to hear back from you regarding how the installation went and how this is working out for you. So you can drop a comment or a review on this product page. But if you happen to have any other further questions, don't hesitate to reach back out to us. We do wanna be sure that you're getting exactly what you want and need. Well, that's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Ratings & Reviews
Awesome service
Fast shipping and product exceeded expe ctations!
Great quality tires! They were delivered quickly and the driver even put them by my garage!!
As Advertised! Very Satisfied! Fast Free Shipping!
Fast shipping in boxes! Awesome
Great better than expected
Arrived as pictured. do not see any defects. bolt spacing true to size. PSI dead on 50 psi as rated. mounted to endure fit and it fit as designed. have not needed to run it yet as it will be a spare for me.
Appears to be a good tire and the galvanized wheel (S. Korea) will be rust free for very long time.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.