6-5/8" x 2-3/16" Oval. Waterproof trailer light serves as either a side marker light or a clearance light. Chrome bezel provides finished look. Surface mount - hardware not included. Metripack connector. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The circuit board is sealed, which means that water will not damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're going to be taking a look at the Optronics M1 LED Clearance or Side Marker Light. This oval trailer light serves as either a side-marker light or clearance light.It features a nice chrome bezel that adds a finished look to the unit. It is sonically sealed, so it features a waterproof housing and lens unit that is submersible. It's a full LED system. LEDs make great replacements for incandescent lights. They last longer, burn brighter, and they're much more efficient.
You don't have to worry about replacing bulbs or worry about brittle filaments.The unit's going to feature a nice amber lens with a polycarbonate lens and housing design. It's very strong and durable. It's designed to mount on the surface of the trailer. You can see you have your mount holes here, so you will need to remove the chrome bezel to gain access to the mount holes. Mounting hardware not included.
It features a metripack connector.The unit is Department of Transportation compliant, and it's PT rated.Taking a look at the overall dimensions, if we take a measurement edge to edge, it's going to give us a measurement of around 6-5/8" long. Going this direction edge to edge, it measures about 2-3/16" to 2-1/4" this direction. When it comes to the depth, it's only about 5/8" deep. The mount holes on the unit are separated on-center by 4-5/8".It contains a total of 4 LEDs or diodes. The power draw at 12.8 volts is 0.12 amps.
Optronics puts a lifetime warranty of their LEDs.We're going to go ahead and hook it up to power. That way you can see what it looks like with some power running to it. Then we'll also be able to turn off our overhead lights so you can see it in a low-light setting. You can see there the four LEDs. It sends out a nice strong consistent signal.
We're going to go ahead and turn off the overhead lights and do that again. The multi-diode design really helps optimize the overall light output of the unit. The lens design allows plenty of light to come through for a really nice light that's again to serve as either a side-marker light or a clearance light for your trailer.That's going to do it for today's look at the Optronics M1 LED Clearance or Side Marker Light.
nice packaging
ship quick and fast good price tha nks
GREAT FRIENDLY SERVICE ORDER WAS RECIEVED COMPLETE & IN GOOD CONDITION & ON TIME
Good looking and working product. Chrome cover is plastic but should hold up well.
We are so happy with your company..thank you! The lights are perfect and just what we needed but best of all was the communication you do not get from many businesses. We were kept informed of when the order was received and when it was being shipped..packing was great. We appreciate you very much and thank you for being an exceptional company..nice change from normal services usually received .
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.