Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Seal numbers are not always listed the same way across axle and hub brands, so the cross-reference data gives you another way to confirm the replacement before the hub comes apart. This oil bath seal matches the following common seal numbers:
| Brand | Part Number |
|---|---|
| Chicago Rawhide/SKF | 23742 |
| Dexter | 010-048-00 |
| Lippert | -- |
| National/Timken | 470350 |
| NOK | -- |
| Transcom | -- |
Use a digital caliper and measure to the nearest thousandth of an inch.
Measure each location in a few spots to check for wear or an out-of-round surface. Match both measurements to the replacement seal.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today were going to review part number 10-48. This is the Redline Trailer Hub Oil Seal. This oil seal is designed for the older style 8000-lb axles. It is designed to be used with a 60-6 wear sleeve. Basically the wear sleeve is a very thin metal sleeve that would fit over the spindle and would fit on the inside of the oil seal right here. That wear sleeve is no longer available so if you happen to have the wear sleeve on your spindle and you do want to replace the oil seal, you can use this one.
Now if you no longer have that wear sleeve or it is damaged then you can actually use a 10-36 oil seal as a replacement. Now a few measurements on this, the overall or outer diameter on this seal is 3.376. The inner diameter which is measured across here would be 2.375. Now if you go to the product page for this oil seal, youll see a chart and that chart will list the different manufacturers of oil seals and their part number which will coincide with this oil seal. That should do it for a review on part number 10-48..
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Great seal.
Great deal and fast shipping
Great inventory and fast friendly service. Always is the first place to check for anything trailer related
Rare seal, had in stock, fast shipping
These are heavy duty seals as compared to the ones I had on the dexter axles I have on my trailer. They should last longer with the double seal. Grease was leaking from two of the old seals which could possibly cause trouble with the brakes. Can only give 4 stars until I give these a couple years of use. If they are holding up next time I repack the bearings, then a 5th star would be appropriate.
Do you have a question about this Trailer Bearings Races Seals Cap?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kenny
9/16/2019
After a year, still no issues. I believe these parts will hold up for years to come. Now I believe a 5 star rating for quality parts and service is warranted