Can Dexter Nev-R-Lube Hubs Be Replaced with Oil Bath Hubs
Updated 10/14/2019 | Published 10/13/2019 >
Products Featured in This Question
Question:
I have Dexter 8k torsion never lube axles and have had 2 bearing failures in 4 years. The trailer was purchased new in 2015. Can I purchase the Oil Bath hub Assembly and replace the Never Lube assembly using the same spindles?
asked by: Fred
Expert Reply:
The existing Dexter 8K Nev-R-Lube spindles on your trailer are designed specifically for the cartridge-style bearing that the corresponding Nev-R-Lube Hubs # 8-389-81UC3 use. The spindles themselves are uniquely sized for this purpose so unfortunately the hubs can't be replaced with standard hubs that use traditional inner and outer bearings, including oil-bath units like the Dexter 8K # 8-285-9UC3 that you referenced.
The only way to switch to hubs like this would be to replace the entire axle or cut off and weld on new spindles (which requires a certified welder with experience in this type of application).
To replace just the Nev-R-Lube bearing you can use part # 31-71-3.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 8,000-lb Axles - 12-1/4" - 8 on 6-1/2 - Oil Bath
- Trailer Hubs and Drums
- Hub with Drum
- Oil Bath
- 25580 / 02475
- Standard Grade
- For 8000 lbs Axles
- 9/16 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Exploded Diagram of Draw Tite 15k Fifth Wheel Hitch
- Q&A: Is Socket Post of B and W Companion Fifth Wheel Hitch Adjustable
- Q&A: What Is the Proper Oil for Oil Bath Hubs on Trailer Axles?
- Q&A: Replacement For Dometic AC 59516.331
- Q&A: Can Standard Lug Nuts be Used With the Taskmaster TA69VR?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Replacement Bearings and Seals for Converting 8K Oil Bath Dexter Axle to Grease
- Article: Trailer Maintenance Schedule
- Article: Most Popular Wheel Bearings
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Trailer Wiring Diagrams
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Testing Trailer Brake Magnets for Proper Function

