Boat Trailer Winch to Fit with CE Smith Bow Roller Bracket for Winch Stands

Question

Question:

I am looking to purchase CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16 Tall - Bolt On - Part Number: CE31005PG My question is about the winch in the pictures. If I am looking to upgrade mine, can you please tell me the part number of the one in the website images that is used with this bracket? That would be very helpful. Thank you!

asked by: Tanner P

0

Expert Reply:

Hey Tanner, thanks for reaching out!

I don't have a record on what winch appeared in the photos we took of the CE Smith Bow Roller Bracket for Winch Stands # CE31005PG, but I looked at the dimensions of the bracket and I was able to find that the Buyers Products Trailer Hand Winch - 800 lbs # 337HW800S will fit inside the bracket just fine. As long as this can handle the weight of your boat you'll be good to go!

If this can't handle the weight of your boat please let me know and I'll be happy to help you look into this further.

expert reply by: Jon G

0

Answer 1

Hey Scott, We do have a trailer winch with the 3-1/2" wide measurement you need to go with the CE Smith Bow Roller Bracket #CE31005PG. What you can use with this is the Fulton Single Speed Trailer Winch #F142102. This has an 1,100 lb capacity…

view full answer...

Answer 2

You could use a bracket such as #CE31005PG for bow stop #YRJONBLOCK. A lot of trailers use this type of bracket for bow stops. I have also included a link to all of the brackets we carry.

view full answer...

Answer 3

Since the Malone EcoLight trailer part #MAL53FR has a tongue width of 2 inches you could use the tower kit part #CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part…

view full answer...

Answer 4

The diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, #CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part #CE10700A. The…

view full answer...

Answer 5

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 6

The best part about boat trailers is that everything is universal so a lot of the parts you add to them are about preference and have to do with the type of boat you're carrying. I recommend checking out the CE Smith Bow Roller Assembly with…

view full answer...

Answer 7

The diameter of the mounting bolt hole on the CE Smith Bow Roller Bracket for Winch Stands, #CE31005PG, is .45 inch. The bracket uses a 5-1/4 inches long x 1/2 inch diameter steel shaft for attaching the roller/Y-stop, which is part #CE10700A.

view full answer...

Boat Trailer Winch to Fit with CE Smith Bow Roller Bracket for Winch Stands

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching