To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Hard, roll-up cover with premium, 5-layer fabric and thick aluminum slats is stylish and durable. Low-profile, self-leveling rails ensure easy install. Latches at tailgate and mid-bed offer enhanced security. Cover removes in seconds without tools.
Features:
Specs:
This hybrid-style cover combines the benefits of a hard tonneau and a soft tonneau into one. It opens faster and removes easier than a hard tonneau. The premium, 5-layer woven polyester and vinyl fabric over aluminum slats provides better protection for your cargo when compared with a standard soft cover. The tonneau rails have 15-degree angles for an ultra-low-profile look, and safely latches at the tailgate and the midway point of your truck bed provide enhanced security for your gear.
Strong, Convenient Hybrid Design
This hybrid-style cover blends the durability and security of a hard cover with the flexibility and convenience of a soft cover. The 3/4" thick, hinged aluminum slats are strong enough to protect your cargo yet offer the flexibility to enable you to roll the cover up for full bed access in seconds. The fabric top over the slats provides a seamless look and helps to protect your bed and cargo from the elements.
Ultra-Low-Profile Design
The side rails are angled at 15 degrees so the cover sits just 1/2" above your truck bed to create a streamlined look. This aerodynamic design - when paired with a covered truck bed - also reduces wind noise and drag and helps to improve fuel economy.
Quick Truck Bed Access
To access your truck bed, simply pull one of the release cables at the tailgate to release the latches. There are cables on the driver's and passenger's side so you can open the tailgate from either side of your vehicle. The cover can then be rolled up in seconds to store at the cab. This allows you to haul large or tall cargo without the need to completely remove the cover.
To store the cover, roll it tight and secure it with the attached safety straps. Then, secure the ends of the safety straps to the retaining loops on the side of the rails.
You can remove the cover completely in seconds without tools. Simply slide the quick-release guides on the underside of the header away from the side rails to release the cover.
Durable and Stylish Construction
The premium, 5-layer polyester and vinyl fabric layer of the cover is resistant to UV rays and inclement weather. This state-of-the-art material has been tested to withstand extreme temperatures from -40 degrees to 120 degrees F. The material is highly resistant to dirt, and it will maintain a clean appearance more easily than a standard vinyl cover.
The black fabric top layer and all-black aluminum slats offer a "blacked out" look when the cover is rolled up. The strong, woven material keeps the slats perfectly aligned to ensure that the cover will roll up evenly every time. Standard soft covers can get lopsided as you roll them up.
The hybrid cover's weight capacity also matches many hard covers that do not conveniently roll up. It is strong enough to hold up to 400 lbs of evenly distributed weight when it's rolled out. The aluminum slats also protect your cargo from being damaged by hail and falling objects.
Enhanced Security
The hard aluminum slats of this cover provide better protection against theft when compared with a soft cover that can be cut open with a knife. There are slam latches and additional security latches to provide maximum security.
To secure your truck bed, press down on the corner ends of the cover to fasten the 2 slam latches at the tailgate. The latches will lock the cover to the vehicle when used in conjunction with a closed and locked tailgate.
There are additional security latches located at the mid-point of the bed. These latches lock automatically with the slam latches, so you won't have to crawl to the middle of the bed to lock them. These side rail latches prevent thieves from pulling up the cover and sticking their hands underneath to get into your truck bed.
Easy, Clamp-On Installation
The Sentry side rails mount to your truck bed rails with bolt-on clamps for an effortless, no-drill installation. These in-bed rails do not overlap your truck bed stake pockets, so you can still use the stake pockets to mount accessories such as tie-down anchors.
The side rails have built-in lips to make sure that they stay square with the bed rails as you tighten the clamps. This self-leveling design makes it easy to install the rails, and it ensures the cover rolls evenly every time.
Installing the cover assembly to the side rails is simple. Place the rolled-up cover on the rails near the bulkhead of your truck. Insert the screws on the leading edge of the cover into the screw holes on the rails. Then slide the quick-release guides on the cover assembly until they lock in place under the rails.
Unroll the cover completely, and close the tailgate. Push down on the end of the cover to make sure both slam latches lock. To prevent wind from lifting the cover, press down along the length of both rails before driving. This will secure the hook-and-loop fasteners to the rails.
California residents: click here
Awesome!!
Easy to install. Fits perfectly.
Everything from order to delivery was spot on ...as usual.
shipping was very fast as ususal, it arrived and the box had damage but a close inspection verified no issues with product. installed by myself a little akward but do-able after reading the instructions and watching the install video it took about 45 minutes to install. There were some fitment issues as the tonneau cover would not stay closed and the tailgate was very hard to open so I shimmed the back corners of the rails with large washers just inside by the tailgate 2 on the right side 1 on the left, I also had to move the rails back about 1/4 inch to ease the opening of the tailgate. So all installation issues are resolved but only 4 stars because the locking mechanism is less than robust. I got the material finish instead of the vinyl it looks very nice. It has rained several time since installed and it keeps most of the water out, what water there was came in by the tailgate I installed this on a 2015 F350 with 8 foot box, it is much easier to open and close than a bak hard folding top.
Love, love, love this cover. Great product that has performed as advertised. If you are considering a cover, this one should be on your short list.
Living at 5000ft I was concerned about the UV degradation, but haven’t seen any in a year. The form/fit/function on my 2018 F350 short bed is excellent and it doesn’t leak in rain or car washes. Great product.
I had one of these on my last truck and loved it! When I got a truck with a longer bed, I didn’t hesitate to purchase the same thing in the new size.
Build quality is great. Install instructions were accurate and clear. It looks fantastic. I'd recommend it. Also, etrailer was great to work with.
Very high quality product. When rolled out, the cover rubber gears did not stay in the track near the tail gate. Had to do some improvising (i.e. little cutting and filing) to get the cover to snap closed easily.
Very sharp look and still looks and operates great after a year.
Very easy to install. Awesome product. Slightly loose back towards the tailgate in the middle where there aren’t any latches. Haven’t been able to test the water resistance yet but seems 100 times better than my previous tri-fold.
Really great cover. It looks just like it did when I installed it a year later. It is easy to remove for when I need to haul larger items like my motorcycles. Does a good job at keeping the rain out as well.
Only issue is the latches by the tail gate don't always retract so I have manually push them back in when closing the lid. I guess the spring is a bit weak.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.