
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keeping gear safe from weather and theft is the main reason most of us want a cover in the first place. The Revolver X4s locks down your truck bed using interlocking aluminum slats hidden beneath a thick, matte black vinyl top. Those 1/4" aircraft-grade slats can hold up to 400 lbs evenly distributed, so they’re tough enough to take real use without flexing. When the tailgate is closed and locked, the built-in latches secure the cover from front to back, keeping your bed sealed and your cargo protected from prying eyes and rain alike.


Hauling large items doesn’t mean you have to remove your cover. The Revolver X4s rolls up by hand and secures behind the cab with nylon straps and buckles, giving you the entire bed to work with in seconds. Because it mounts inside the bed rails, your stake pockets stay open for racks, tie-downs, or other accessories. It’s a practical setup for jobs, camping gear, or anything that doesn’t fit under the cover.

Some covers look bulky, but this one sits nearly flush—just about 1-1/2" above the rails—for a clean, understated look. The matte black finish runs across the vinyl top and aluminum underbody, so everything matches. It’s not just for looks, though. The self-tensioning frame and beveled edges keep the cover tight and direct water off the sides, maintaining that smooth fit through heat, cold, and rain.

Getting a tight, straight fit doesn’t need to be complicated. The Revolver X4s clamps directly to the inside of your bed rails—no drilling required. Slotted brackets and pre-installed shims help align everything so the cover sits square and seals evenly the first time. Once installed, it’s solid and ready for long-term use without re-adjusting.

If you use racks for ladders, kayaks, or overland gear, this cover works right alongside them. The inside-rail mount keeps your stake pockets uncovered, so it’s compatible with T-slot and stake-mount systems like Adarac Pro and Thule TracRac SR. That makes it easy to carry heavy loads up top while still keeping your truck bed protected underneath.
Ratings & Reviews

Brooke M.
7/25/2025
Lauren is great! So glad she was able to help you with this. The cover looks right at home on your new truck! Thanks for sharing the pics :)

Lazer S.
2/24/2026
Glad to hear you are still happy with it, Todd! These hard roll up covers are definitely nice and durable. What are you keeping in your bed? I have a bunch of survival type gear in a milk crate. Can never be too prepared!

Brian P.
6/14/2023
The cover has been on my truck for a little over a year now. It looks exactly as it did the day I installed it. By far the best tonneau cover I have ever put on one of my trucks. Also, the roll up is much more convenient than the older tri-fold models I have had before. This thing looks good and is tough as nails. It has not been babied over the last year, but shows no signs of weartear. My one year review is 5 STARS!! I highly recommend this cover!

Roger
9/21/2023
I had a second warranty claim in June 2023 due to the same issues. I contacted BAK warranty claims and once again they were quick to respond. I asked them to replace my cover with a BAKFLIP MX4. They agreed and shipped the replacement very quickly. So far the new cover is working fine. Im interested to see how it works in cold and freezing conditions. My personal belief is the BAK Revolver is too heavy when rolled up against the cab on an 8 foot bed. The weight causes it to flex, stressing the hinged ribs. The ribs then start to separate. Im guessing a cover for a shorter bed would not cause the ribs to separate due to less weight when rolled up.

Tim
8/24/2023
My previous review still stands. I have to reposition cover at least once a month. Still love the cover other than that issue. I believe a redesign of the connector would be in order for this product to get 5 stars.

Tim
9/7/2025
Not great anymore… the glued on waterproof liner started peeling up about 1 year into service, the the pivot points on the tool up part started to separate towards the back and now it doesn’t roll back flat or seal properly.


Jerry
9/20/2025
One year later and still doing well. I highly recommend them & would purchase again.


Katrina B.
2/7/2023
Holy wind strength! Luckily this has a 5 year warranty. I will send you more detailed information about contacting BAK in an email.

Katrina B.
2/23/2023
Holy wind strength! Luckily this has a 5 year warranty. I will send you more detailed information about contacting BAK in an email.

Steven
1/18/2024
The Tonneau Cover has been working Great no leaks. I really think this product works as advertised. I would and have recommended this product to other people.

Tim B.
8/25/2023
Two years in and still very pleased. I get compliments frequently for the tidy appearance and minimal bed capacity impact. One more gotcha I should note: when below freezing, it’s rigid and can be difficult to roll away. Generally a minor issue for me in the mid-Atlantic mid morning sun warms it enough that it’s OK. However, having spent time in NY last winter there were times I simply couldn’t roll it away without concern about damage. If you’re in a more northerly climate, be aware.
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Brandon
5/19/2025
It’s a piece of junk. It’s all faded. It isn’t even close to water proof it won’t even keep road dust out and all the plastic pieces have broken off. The cable that locks and on locks it broke too. I hate this piece of crap and I wish I never bought this expensive hunk of crap. Also if it snows and freezes, you can’t open it.