To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Yakima 50" CoreBar SM:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we have a 2018 Kia Sportage, we're gonna be test fitting the Yakima CoreBar Roof Rack System. This is gonna be consisting of part numbers Y00421, these are the 50 inch long CoreBar crossbars. Part number Y00145, this is the RidgeLine Tower for the flush side rails. Finally, part number Y06021, this is the RidgeClip Fit Kit for this particular vehicle.Now when it comes to these bars, it combines two things; the aerodynamic shape of the JetStream bars from Yakima with the strength of the RoundBars that you'll find from Yakima as well. This can carry a wide variety of accessories while freeing up space inside your vehicle such as bike racks, cargo baskets, or cargo boxes. And this utilizes the fixed mounting points to attach to your roof rack system on your flush mounted side rails so this eliminates a lot of headaches that you get with other roof rack systems such as having to measure from center to center and make sure everything's nice and neat at the spots right here and it's ready to go.
It does have nice thick padding where it makes contact with your factory side rails as well as on the clips that go around it. With our end caps here, we do have these plastic knockouts that you can remove and replace with the Yakima SKS Lock Core System so you can make this secure to your roof as well as key inaudible 00:01:21 with the accessories that you're hauling.We have the front bar installed already, let's go ahead and show you how the rear bar goes on. We have it partially assembled on our table here. We'll show you how the rest of it goes on. In front of me is all the stuff that's gonna come with the kit.
We have the tower, the clips, the fit kit for the bar, and the tightening tool to make sure everything gets tightened down to its proper torque. We'll start with our tower and we'll start installing it onto our bar. We'll take our plastic bracket, which pushes into place onto the top, you hear a little bit of a click. Then we'll loosen up this right here in the center and flip it upside down, you'll see a hole there. There we go.Then we'll slide on our metal bracket onto our bar.
This is what's gonna enable our tower to attach to our bar. Then we'll line up the hole with the screw and we'll tighten this down until our tool here will give you two to three audible clicks. This when you know it's torqued. Now it's still pretty tight to the bar so we'll go back to that screw that we loosened up earlier and just loosen that up little bit more because we want some maneuverability with our tower. Then we'll take our end cap, push that in as well.
Loosen it just a little bit more. There we go. Then we'll take the pad from our fit kit and that pushes into the bottom here and just snaps into place, like so.Now we can set this onto our flush mount side rails. Now right now, we're not gonna have it in a specific set place. We're gonna try to kind of eyeball it to keep it with the front portion, let me show you on the other side so you can see it better. With the two holes here, you wanna go with the hole more towards the front so we'll kinda try to line it up with that. There we go. Make sure it's sitting right on top of our flush mounts, there we go, like so. inaudible 00:04:23 just a hair here.Alright, now we can start taking our clips and installing those. For our front clip, you'll see just the one. The rear clip, you'll have the two plus the notch that fits into that fixed mount. So lift up and it hooks on like so. We'll have to open up the door here because this one's kinda tricky you kinda have to eyeball it to get it in properly. Lift up just a little bit . You'll be able to see this a little bit easier on the other side, there we go. The rear part, as you can see, is the hardest part. Alright, once we have those lined up, our next step is to take our tightening tool and tighten down the clamps to the flush mounted side rails then make sure our rear clamp matches up with that mount. Alright, there we go. Maybe I'll close the door so I can a little bit closer here. As we tighten it down, you can see the clamp moving closer and closer to the flush mount and repeat this on the other side.So our next step is we're gonna measure for our crossbar overhang and that's from this point out. We're gonna make sure that that's the same measurement on both sides, that's why we haven't tightened down our towers to our bar yet.Alright, with that done, we'll take our tool and tighten our tower down to our bar.Then our final step is we're gonna take our end caps, we'll put those in place. It's very easy, they just snap in. You take the two hooks on the bottom, match them up like so. Now we're ready to load up our gear and hit the road. But first, let me give you a couple quick measurements and this is gonna give you an idea of the height that this adds to your roof. As you can see, with these towers here, that adds quite a bit. From the center of the roof to the bottom of the bar is gonna be about four and a quarter inches and from the center to the top is gonna be about five and the 3/8 inches, so from center to the top, center to the bottom. When you have your bike racks or your cargo baskets installed, fully loaded, just keep that in mind when you're pulling into your garage. Also, these bars do have a combined carrying capacity of 220 pounds, however, you always want to go by your vehicle's manual and figure out how much weight it can take up on the roof and go by the smaller of the two numbers.There you have it for the Yakima CoreBar Roof Rack System on our 2018 Kia Sportage.
Average Customer Rating: 4.7 out of 5 stars (163 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.I've just recently installed this setup on my 2015 Toyota Camry.
etrailer - Shopping for this rack was fairly simple, and the shipping from etrailer was quick and reliable. I received the rack in 2 different shipments but they both arrived at the same time. etrailer made sure the all the contents were available. They also have several resourceful videos on their YouTube page, which was helpful while shopping for the rack and during a few trouble shooting items while I was installing.
Yakima Core Bar - Overall a quality product. Everything necessary was supplied, including a handy measuring tape and some very well written instructions. The fit is clean and very sturdy. The only qualm I have is that the hex hole in the large anchor bolts are a bit larger than the supplied hex driver. Toward the end of the installation, the tool was worn and ended up turning inside the bolt itself (not due to over torquing whatsoever). I ended up having to use a hex set I had in my toolbox to complete the installation because the provided tool was starting to strip out the anchor bolt. With that said, the kit is still a great kit that meets my expectations.
Wind noise is quieter than my OEM VW bars on my 2017 Volkswagen GTI. It's noticeable, but nothing extreme - I believe that's just the price you pay when adding crossbars to a vehicle.
Verdict - etrailer has definitely met my expectations, and the Yakima kit provided is a well designed kit that fits well!
From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
Placed the order for the rack a year ago. I didn’t like the way it sat on the roof of my vehicle, but because I had already installed it, etrailer customer service refused to take it back. I would’ve gladly paid for the return shipping or some sort of restocking fee, but that wasn’t an option. I’ve had brand new rack and hardware sitting in their original boxes for a year.
As described! Quick delivery!
Great product great service
Great secure product though some written instructions on their setup and installation would be helpful.
Of all of the many racks I’ve purchased over the years, this, by far, is the worst. Once installed, it is okay, but installing these towers is extremely frustrating. The front and back “clips” fall out requiring multiple attempts. When I contacted Yakima customer support, they acknowledged that they have received complaints about the product. Their solution was to just leave the racks on the car. I asked to be notified when a better product was available but a year later I’ve received no response. If this is the only option available for your vehicle (as it was for mine), then prepare to be frustrated. Otherwise, purchase a different product.
Should include extra end caps just in case they fall off.
These crossbars feel like they are well made and sturdy. It took less than 30 minutes to install with the Ridgeline Towers. I love the look of the bars! Can't wait to load the Kayaks up and get out on the water.
Timely delivery of my order, as usual! Easy to install on my 2015 4Runner. After I had the mounts ready and put on both bars, I installed the front one and fine-tuned it, the second took even less time then. I now have the ability to carry up to 3 kayaks, perfect! etrailer is a great company!
Very sturdy, well made. The assembly instructions are not too good but if you call Yakima they will provide additional instructions.
I bought both the roof rack and the cage from etrailer! Put everything on myself...easy peasy!
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
I am thrilled this got delivered sooner than anticipated! It was quite easy to install once you started actually putting it together and measuring everything out. I like that this can easily be removed and installed onto the vehicle.
I needed crossbars for my new 2018 Mazda CX5, which came with flush side rails. The RidgeLine Towers for the Yakima crossbars, along with the vehicle specific kit worked great. The installation (10-15 min) is super easy. They look cool, and performed great (I strapped 160-lbs rooftop tent on them!). Removing them is also super easy (10 min tops). Highly recommend.
It's a great roof rack, but the paint is getting all scratched off...probably from sliding kayaks up onto it. I hope it doesn't rust. So far no signs of that.
I loved how easy these towers were to install. Took less than 30 mins total. They look nice and feel very sturdy. I am looking forward to loading the Kayaks up and getting out on the water next weekend.
Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process.
Because of the 'rona-induced supply chain interruptions, I was unable to purchase all of my Yakima components from etrailer, but I did get these, and they are typically excellent Yakima components. Well-made, easy to install, good directions, no problems.
I chose the Yakima roof rack, because It spanned 50 inches, rather than the leading competitor's 47 inches, making it better for tying down 4 ft x 8 ft sheets of building material. It also seemed to be about half the price. It took me about 2 hours to put it all together and mount it on my car. The instructions were all visual and there was one little pic I didn't understand, but the equipment seemed to go together correctly anyway. Now that it's adjusted, it should be fairly easy to remove and replace next time. I did need to put on super tacky gloves to get the covers off. Although it seemed unnecessarily complicated, I would still choose this product again.
Great product! Relatively easy install, had the racks on for a few days now with no issues.
I have a 2004 Toyota Camry, my purpose is to purchase this Yakima Baseline System for Rooftop tent. My 23Zero rooftop tent weighs 130 lb, so far it's super solid. I did some minor adjustments based on the shape and level of the roof when mounting it.
Easy installation. Great follow-up and service by etrailer post-delivery
Feel solid, not too tricky to install
THERE'S A PIECE MISSING, A rubber cap on 1 of the crossbars
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.