See what our Experts say about this Inno Roof Rack

• Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to Vehicle
  The door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
  view full answer...
  
• Recommended Roof Rack for 2014 Mazda 3 Without Fixed Mounting Points
  If your 2014 Mazda 3 does not have the fixed mounting points, I recommend the Rhino Rack Aero Bar Roof Rack. This system consists of # RRVA126B-2 for the two 49 inch Vortex Aero Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK406 for the Custom DK Fit Kit. This will provide an extremely quiet roof rack system with a weight capacity of 165 pounds. If you find that your vehicle does in fact have fixed mounting points, you can use the same crossbars and 2500 Series Legs as above,...
  view full answer...
• Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked Roof
  Do you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 Door
  For your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short...
  view full answer...
  
• Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota Avalon
  For a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use. The best way to carry two kayaks on the roof...
  view full answer...
• Roof Rack for 2013 Ford Focus
  Roof rack # SR1010 is not a fit for a Ford Focus, is this the one you have? If you let me know what year your vehicle is I can recommend the right fit, but this one is not going to work on a Focus.
  view full answer...
• Roof Rack Options For A 2024 Honda CR-V
  Hey Shelby, Roof rack components are all brand and even model specific so I'll need to know exactly what crossbars you have to find any other compatible components. The # INSUT feet you referenced are for Inno square crossbars. If you want to use them then you would need fit kit # IN45RR and 54" Inno sqaure crossbars # INB137. If you can get me more info on what you have or if you're just wanting to go with a whole new rack then let me know and we can figure out what the best options...
  view full answer...
• Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia Sportage
  The Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
  view full answer...
• Replacement Square Bar Solution for Older Thule Square Bar Roof Rack
  The older style of Thule square bars are no longer made but I do have a solution for you. The Inno square crossbars are the exact same dimensions and will fit your Thule feet so you'd want the # INB137 for a set that is 54 inches long. The new Thule square bars attach to the feet with a track on the bottom side of the bars instead of the feet grabbing around the bars.
  view full answer...
• Do the Inno Square Crossbars fit the Thule Pass Through Foot Packs
  Yes the Inno Square Crossbars part # INB137 are the same 7/8" tall and 1 1/4" wide as what the original Thule Square bars were. They will work with the older Thule Foot Packs for square bars like part # TH450. As you know they are a pass through style bar so you have the option of using any length cross bar you would like. I generally stay inside the vehicle mirrors because it gives you a good reference point of how wide they are on the rooftop.
  view full answer...
• Square Crossbars Compatible with Older Thule Crossroad 450 Feet
  The old Thule Crossroad 450 Feet were compatible with the Thule square crossbars that were a whole all the way around. The new Thule SquareBars have a slit in the bottom so they only fit the standard Thule feet and aren't compatible with the older 450 feet so we need to look to a different manufacturer. We have actually found that the Inno Square Crossbars have the same dimensions as the older Thule crossbars so they will be compatible with the older Thule feet like what you have. I have...
  view full answer...
• Can I use Inno Aero Crossbars on Thule Towers?
  I'll start out with the easiest part of your question in saying that footpacks between the two manufacturers are not going to be compatible, so you wouldn't be able to use Inno footpacks with a Thule tower or vice versa. When it comes to the cross bars, the Thule Vortex Aero Bars # TH711520 and Inno Aero Crossbars # INXB123-2 are going to be very close to the same size and they will mount in a similar manner on a foot pack, so you are able to use an Inno Aero Crossbar on a Thule tower...
  view full answer...
• What are the Dimensions of the Thule Square Bars
  I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like # INB137.
  view full answer...
• FIt and Compatibility of Inno Roof Rack on a 2014 Ford Fusion
  The front feet should sit flush just like the back feet do on your 2014 Fusion. The first thing to check is that you received the correct pad kit for your vehicle. After that you will want to check the orientation of the rubber pad into the foot of the carrier, I have linked an image of how to tell if this is installed properly for you to better see. Finally you will want to consult the mounting position measurements that were included with the mounting hooks. I have also linked these...
  view full answer...
  
• Solutions for Carrying Spare Tire on 2009 Toyota RAV4 Sport
  From what I understand, the 2009 RAV4 Sport was originally equipped with run-flat tires which explains why they typically didn't come with a spare tire or a good place to store one. The Buyer's Products # 3375201010 spare tire carrier is a universal fit item, so Buyer's Products doesn't offer specific mounting instructions or guidance. It would be up to the end user to determine the best placement and do the measuring to determine if the tire and mount would fit in the desired location....
  view full answer...
• Will the Thule Hullavator Pro Kayak Carrier Work W/ Inno Square Crossbars?
  I'm not quite sure what you're asking, but let me see if I can clear some things up for you. The Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs # TH898 is compatible with both the Inno Crossbars # INB137 you were looking at as well as your Thule crossbars that have the channel down the middle. Since you already have crossbars you don't need to use the Inno bars . The only reason you'd need to swap your bars out would be if you don't have 4"-8" of overhang past your...
  view full answer...
• Recommendations on How to Safely Carry 12 Foot Jon Boat on Roof of 2013 Hyundai Tucson
  A great choice would be a Inno Square bar roof rack, which would be made up of the following parts: 54 inch square profile crossbars part # INB137 Inno Feet for Crossbars, part # INSUT Vehicle specific clamp kit, part # INK605 To secure the boat to the roof, using ratchet straps like # IMF14256 hooked over the crossbars would provide a secure hold for the boat. Using foam blocks like # MPG152 would protect the roof rack from the boat and vice versa, as well as adding some friction to...
  view full answer...
• Inexpensive Roof Rack Recommendation for a 2019 Honda Civic Hatchback
  I do have a cost effective roof rack option for your 2019 Honda Civic Hatchback with a bare roof but the SportRack Semi-Custom Roof Rack for Naked Roofs part # SR1002 is not a confirmed fit. Instead, I recommend using the Inno Square Crossbar System part # INB137, part # INSUT, part # INK684. This system is a custom fit for your Civic unlike the SportRack system that is semi-custom fit which means it will have a much cleaner fit/look. The custom fit system also has a higher weight capacity...
  view full answer...
• Fitment of Older Yakima and Thule Systems on a 2014 Nissan Frontier and 2015 Ford C-Max
  Thank you for all of the info and the pictures! When I looked at everything it sadly looks like none of your current older equipment will fit your newer vehicles save for the Thule bars on the C-Max. For your 2014 Nissan Frontier you can either use a 1 or 2 bar roof rack with a load extender or a ladder rack (or by itself) if you want. Here is a list of the following: 2-bar roof rack: 54" Vortex Crossbars - # RRVA137B-2 2500 Series Legs - # RRRLKVA Fit Kit - # DK374 1-bar roof rack: 54"...
  view full answer...
  
• Recommended Kayak Carrier for 3 Kayaks on 2008 Toyota Highlander
  I envy your choice of lakes for your kayaking, but I can relate to the convenience of nearby water since I have to go only 1/4-mile to hit the lake in my kayak! If your 2008 Toyota Highlander has a factory-installed roof rack with crossbars that run side-to-side then you can use the Thule Kayak Stacker # TH830. The Stacker handles up to 4 kayaks up to 10-feet in length and holds them on their sides. Please click on the video link provided. If you don't have a factory roof rack but do...
  view full answer...
• Will SportRack Roof Rack # SR1002 Fit a 2017 Civic EX 4Dr
  We do carry roof rack systems that fit your 2017 Honda Civic but the SportRack, part # SR1002, is not one of them. It only fits the Civic through 2013. Instead I recommend the Inno square bar system consisting of parts # INB137, # INSUT, and # INK684. This is the most cost effecient rack that fits your car.
  view full answer...
• Roof Rack Recommendation for 2018 Hyundai Tucson to Carry Thule Hullavator
  To install a Thule Hullavator on your 2018 Hyundai Tucson with a naked roof (thanks for picture), you will first need to install a roof rack. For that you'd want the Inno Square bar roof rack part numbers # INB137, # INSUT, and # INK680 which is a confirmed fit and will give you bars that the Hullavator can attach to.
  view full answer...
  
• Roof Rack Recommendation for a 2012 Honda Civic 2-Door
  The Rola 59758 only fits the 4-door models of the 2012 Honda Civic and will not fit a 2-door but we do have racks that will fit. I have included a link to the right to the options. The most economical option is the Inno system made up of the following parts: Inno Square Crossbars # INB137 Inno Feet for Square Crossbars # INSUT Custom Fit Kit # INK642 Then you can use a bike rack such as the ForkLift, # Y02098. This is a fork mount bike rack so it will not make contact with the frame of...
  view full answer...
• How to Transport 3 Kayaks with 2018 VW Golf SportWagen
  To transport all 3 of your kayaks with your 2018 VW Golf SportWagen you will need to go with a set of roof rack crossbars and a post/stacking style carrier that mounts to them. Starting with the roof rack I recommend an Inno Square Bar System that consists of # INB137 for two 54 inch Square Crossbars and # INFR for the Mounting Feet. This will provide you with a durable system that has a 220 pound weight capacity. The mounting feet simply clamp around the factory rails on the roof of...
  view full answer...
• Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to Vehicle
  The door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
  view full answer...
  
• Replacement Lock Cover for Inno Feet
  Hi Scott; sorry for the delay on this it took a while to hear back from Inno. The part you need is the Replacement Lock Cover Set for Inno Roof Rack Feet Stays for Bare Roofs # IN97YV. This replaces the lock and cover on the # INSUT. However, this will be a random lock so more than likely it won't match the others on your roof rack. We don't have a way to get a specific lock core for it to remain keyed alike.
  view full answer...
• Parts Needed to Install Older Thule Square Bars 2012 Toyota Camry
  Hey Brian, you are on the right track for a solution to allow you to continue to use the older Thule square bars on your 2012 Toyota Camry as thankfully Inno decided to make their square bar racks to fit the exact same bar size. I am not sure how Thule feels about this haha... So what you need is the feet kit part # INSUT and the fit kit part # INK872 and you'd be set!
  view full answer...
• Thule Roof Rack Recommendation for 2012 Toyota Camry
  For a new Thule roof rack that fits your 2012 Toyota Camry the Wingbar Evo rack part numbers # TH711420, # TH710501, and # TH145149 would be a great choice confirmed to fit the vehicle and the bike racks you have as well as long as they can fit aero shaped bars.
  view full answer...
• Roof Rack Capacity for a 2017 Ford Fiesta
  The racks you see have a different weight capacity depending on if your 2017 Ford Fiesta is a 5-door hatchback or 4-door sedan. For example, the Rhino Rack that consists of Aero cross bars # RRVA118B-2, legs # RRRLKVA and fit kit # DK046 have a 110 lb capacity if installed on a '17 Fiesta that is a 5-door hatchback but the same rack has a 165 lb capacity if installed on a '17 Fiesta that is a 4-door Sedan. Choosing what model of Fiesta you have will lead you to the correct rack. I've attached...
  view full answer...
• Recommended Roof Rack for 2014 Mazda 3 Without Fixed Mounting Points
  If your 2014 Mazda 3 does not have the fixed mounting points, I recommend the Rhino Rack Aero Bar Roof Rack. This system consists of # RRVA126B-2 for the two 49 inch Vortex Aero Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK406 for the Custom DK Fit Kit. This will provide an extremely quiet roof rack system with a weight capacity of 165 pounds. If you find that your vehicle does in fact have fixed mounting points, you can use the same crossbars and 2500 Series Legs as above,...
  view full answer...
• Parts Needed to Install Old Thule Square Bars on 2000 Toyota Tundra Access Cab SR5
  Hey Chris! To install your Thule square bars on the roof of your Tundra you will need the Inno Feet for Square Crossbars # INSUT along with the Custom Fit Kit # INK153. What will you be using the solar for?
  view full answer...
• Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked Roof
  Do you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 Door
  For your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short...
  view full answer...
  
• Roof Rack for 2010 Toyota Corolla Similar to Thule Square Bar Rack
  Thule stopped offering the fit kit you mentioned for your 2010 Toyota Corolla which means that while we have other great roof racks that can be installed on your vehicle we do not have any Thule options. For a rack that is very similar to the Thule square bar racks we have the Inno part # INB127, # INSUT, and # INK593 that fits your vehicle. This rack actually has the exact same crossbar dimensions as the Thule square bars but at a much better price.
  view full answer...
• How to Use Older Thule Square Bars with 2017 Toyota Highlander with Naked Roof
  Hey John, I do have a solution for you but the Thule square bar roof racks changed a few years ago and now their current feet don't work with the older style of crossbar. The new crossbar has a channel that runs along the bottom of it whereas old style did not have this. But we have found is that the Inno square bars are exact same dimensions so you can use their feet and fit kit with the bars you have now. For that you'd need the part numbers # INK666 for the correct fit kit and part...
  view full answer...
• Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota Avalon
  For a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use. The best way to carry two kayaks on the roof...
  view full answer...
• How To Determine Crossbar Placement On A 2024 Ford Maverick
  Hello Warren, I can definitely help. Roof rack manufacturers test vehicle roofs to determine the strongest points. They develop their fit kits to fit in this predetermined spot. So, this measurement will vary from vehicle to vehicle. For a 2024 Ford Maverick, the front crossbar will be placed 12-1/4" back from the top edge of the front windshield. The rear crossbar will be placed about 27-1/2" behind the front crossbar. There may be a bit of front/back wiggle room, but generally you will...
  view full answer...
• Roof Rack Recommendation for 2008 Honda Fit for Carrying Kayak Carrier
  For your 2008 Honda Fit the Inno roof rack part numbers # INB127, # INSUT, and # INK219 is a confirmed fit and would do a great job carrying a kayak carrier. For the carrier we have the Thule Hullaport part # TH849000 which will do a great job and is compatible. It's padded, can fold down when not in use, and can be expanded to carry a second kaya if ever needed.
  view full answer...
• Recommended Cost-Effective Roof Rack for a 2009 Chevrolet Malibu and a 2012 Nissan Maxima
  The SportRack # SR1002 is a Semi-Custom roof rack. It will fit your 2009 Chevrolet Malibu and will work if you are looking for the most cost-effective option out there. If you plan on using the roof rack frequently though I highly recommend going with a custom roof rack for your Malibu. A custom rack is one that uses a fit kit specially designed and tested to fit your roof properly. The most cost-effective option we have in this category is the Inno rack which consists of the Square Crossbars...
  view full answer...
• Roof Rack Recommendation for 2006 Chevy Uplander
  Thule does not make a roof rack solution that fits the naked roof versions of the 2006 Chevy Uplander. Closest thing would be the Inno brand roof rack that consists of part numbers # INB127, # INSUT, and # INK585. This won't reuse any of your Thule roof rack but your roof carriers will fit this same square bar style of rack that you had.
  view full answer...
  
• Roof Rack for 2013 Ford Focus
  Roof rack # SR1010 is not a fit for a Ford Focus, is this the one you have? If you let me know what year your vehicle is I can recommend the right fit, but this one is not going to work on a Focus.
  view full answer...
• Cost Effective Roof Rack Recommendation for 2011 Honda Accord
  What we've found with the Sportrack Semi-Custom roof racks like the part # SR1002 is that they don't always fit the best. Reason being they are designed to fit as many vehicles as possible which means they don't fit everything perfectly. The price makes these hard to not be tempted by, but your best option is a fully custom fit roof rack like the Inno part # INB127, # INSUT, and # INK745 otherwise you'll have to get somewhat creative to get the Sportrack to fit right.
  view full answer...
• Roof Rack Options For A 2024 Honda CR-V
  Hey Shelby, Roof rack components are all brand and even model specific so I'll need to know exactly what crossbars you have to find any other compatible components. The # INSUT feet you referenced are for Inno square crossbars. If you want to use them then you would need fit kit # IN45RR and 54" Inno sqaure crossbars # INB137. If you can get me more info on what you have or if you're just wanting to go with a whole new rack then let me know and we can figure out what the best options...
  view full answer...
• What is the Inno Roof Rack Weight Capacity for My 2016 Toyota Tacoma Limited Double Cab?
  Hello Dana, Yes, the Inno Square Bar Roof Rack for Naked Roofs - Steel - Black - Qty 2 # IN79TR will be a great fit for your 2016 Toyota Tacoma Limited Double Cab without factory rails. As for the weight rating, you are only as strong as the weakest link, the feet are actually rated for 132 pounds, so I cannot recommend putting more weight on the roof rack than that. As you already know, you will want to check your owners manual to see what Toyota says you can put up there, based on my...
  view full answer...
• Parts Needed To Mount Thule Square Crossbars On 2016 Honda CR-V
  Hello Chad, thanks for reaching out. I do have a solution for you, but first I will need to know exactly what kind of Thule square bars you have. Basically there are new-style and old-style bars. The new-style bars have a bottom channel for mounting the towers. The old-style bars are just a solid bar and do not have a bottom channel. We have solutions for both, just select from the following depending what kind of bar you have. New Style bars: - Evo Clamp Feet for Thule Crossbars - Naked...
  view full answer...
• How to Adapt Old Thule Square Bars to 2015 Toyota Prius V
  Hello KMc; I don't think a fit kit is available but you can still install those old Thule bars on your Prius. The Thule square bars match the current Inno square bars. You can use the Inno Feet for Square Crossbars # INSUT along with the Custom Fit Kit # INK870. The full Inno roof rack # IN54XR comes with 50" bars so I would double check the length of your current crossbars to make sure they're appropriate for your vehicle.
  view full answer...
• How to Mount Old Thule Square Bars to 2020 Toyota Camry
  Thanks for the pictures. What you have there are the old Thule square bars. Since none of the current Thule feet are compatible with those crossbars you will need to use the Inno Feet for Square Crossbars # INSUT. The Inno bars are the same as the old Thule so they're compatible with the feet. You will also need the Custom Fit Kit # INK498 to attach them to your 2020 Camry.
  view full answer...
  
• Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia Sportage
  The Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
  view full answer...
• Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia Sportage
  The Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
  view full answer...
• Roof Rack for a 2017 Kia Sportage With a Naked Roof
  Inno makes several options for your 2017 Kia Sportage with a naked roof that clamp to the vehicle. I've included a link to all of the possible kits, but I recommend in particular the Through Aero Kit, consisting of the following parts: Inno Aero Crossbar Kits, 51 and 54 inches, part # INXB130-138 Inno Through Feet for Aero Bars, part # INXS250 Inno Custom Fit Kit for Naked Roofs, part # INK686 This kit will add a raised, aero bar kit to your vehicle, and present a sportier look than...
  view full answer...
• Roof Rack and Canoe Carrier Recommendation for 2019 Kia Sportage with Naked Roof
  Inno roof rack part numbers # INXB108-115, # INXS200, and # INK686 would be what I recommend for your 2019 Kia Sportage with a naked roof. This rack will give you aero shaped bars that will offer minimal wind noise and will install easily. Then for a canoe carrier the Thule Portage part # TH819 would fit and be a great choice as well. It will let you carry the canoes facing down and comes with straps needed to secure the canoe.
  view full answer...
  
• Roof Rack For 2019 Kia Sportage With Naked Roof
  The Inno Square Crossbars - Steel - Black - 54" # INB137, Feet # INSUT, and Fit Kit # INK686 that you referenced is confirmed to fit your 2019 Kia Sportage if it has the naked roof without roof rails. I attached a link to our return policy that you can check out. If parts are missing or the products do not fit as intended, our customer service team will certainly handle the issue.
  view full answer...
• Recommended Roof Rack And Kayak Carrier For A 2019 Kia Sportage
  A good rack for your 2019 Kia Sportage is the Inno Square bar system you were looking at. All you need is the Inno Square Crossbars # INB137 the feet # INSUT and the Custom Fit Kit # INK686. It's pretty simple to use and has locking caps so it won't go anywhere! If you wanted something super simple that you can use on almost any car, truck or SUV grab these monkey bars # 298-SX6000B. They just suck onto your roof so if you're not sure how your getting to the water, you don't have to worry...
  view full answer...

Do you have a question about this Roof Rack?