See what our Experts say about this Inno Roof Rack

• Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to Vehicle
  The door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
  view full answer...
  
• Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota Avalon
  For a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use. The best way to carry two kayaks on the roof...
  view full answer...
• Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 Door
  For your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks. I have attached a short...
  view full answer...
  
• Roof Rack for 2013 Ford Focus
  Roof rack # SR1010 is not a fit for a Ford Focus, is this the one you have? If you let me know what year your vehicle is I can recommend the right fit, but this one is not going to work on a Focus.
  view full answer...
• Roof Rack Options For A 2024 Honda CR-V
  Hey Shelby, Roof rack components are all brand and even model specific so I'll need to know exactly what crossbars you have to find any other compatible components. The # INSUT feet you referenced are for Inno square crossbars. If you want to use them then you would need fit kit # IN45RR and 54" Inno sqaure crossbars # INB137. If you can get me more info on what you have or if you're just wanting to go with a whole new rack then let me know and we can figure out what the best options...
  view full answer...
• Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked Roof
  Do you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
  view full answer...
• Recommended Roof Rack for 2014 Mazda 3 Without Fixed Mounting Points
  If your 2014 Mazda 3 does not have the fixed mounting points, I recommend the Rhino Rack Aero Bar Roof Rack. This system consists of # RRVA126B-2 for the two 49 inch Vortex Aero Crossbars, # RRRLKVA for the 2500 Series Legs, and # DK406 for the Custom DK Fit Kit. This will provide an extremely quiet roof rack system with a weight capacity of 165 pounds. If you find that your vehicle does in fact have fixed mounting points, you can use the same crossbars and 2500 Series Legs as above,...
  view full answer...
• Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia Sportage
  The Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
  view full answer...
• Parts to Install Inno Square Bar Roof Rack on 2023 Chevy Traverse Raised Rails
  The Inno square bar roof rack that fits the raised rails on your 2023 Chevy Traverse includes the following parts: - 54" Square Crossbars # INB137 - Inno Feet # INFR As long as your crossbars are at least 54" you just need the feet and you're good to go!
  view full answer...
• Do the Inno Square Crossbars fit the Thule Pass Through Foot Packs
  Yes the Inno Square Crossbars part # INB137 are the same 7/8" tall and 1 1/4" wide as what the original Thule Square bars were. They will work with the older Thule Foot Packs for square bars like part # TH450. As you know they are a pass through style bar so you have the option of using any length cross bar you would like. I generally stay inside the vehicle mirrors because it gives you a good reference point of how wide they are on the rooftop.
  view full answer...
• Replacement Square Bar Solution for Older Thule Square Bar Roof Rack
  The older style of Thule square bars are no longer made but I do have a solution for you. The Inno square crossbars are the exact same dimensions and will fit your Thule feet so you'd want the # INB137 for a set that is 54 inches long. The new Thule square bars attach to the feet with a track on the bottom side of the bars instead of the feet grabbing around the bars.
  view full answer...
• FIt and Compatibility of Inno Roof Rack on a 2014 Ford Fusion
  The front feet should sit flush just like the back feet do on your 2014 Fusion. The first thing to check is that you received the correct pad kit for your vehicle. After that you will want to check the orientation of the rubber pad into the foot of the carrier, I have linked an image of how to tell if this is installed properly for you to better see. Finally you will want to consult the mounting position measurements that were included with the mounting hooks. I have also linked these...
  view full answer...
  
• Square Crossbars Compatible with Older Thule Crossroad 450 Feet
  The old Thule Crossroad 450 Feet were compatible with the Thule square crossbars that were a whole all the way around. The new Thule SquareBars have a slit in the bottom so they only fit the standard Thule feet and aren't compatible with the older 450 feet so we need to look to a different manufacturer. We have actually found that the Inno Square Crossbars have the same dimensions as the older Thule crossbars so they will be compatible with the older Thule feet like what you have. I have...
  view full answer...
• Can I use Inno Aero Crossbars on Thule Towers?
  I'll start out with the easiest part of your question in saying that footpacks between the two manufacturers are not going to be compatible, so you wouldn't be able to use Inno footpacks with a Thule tower or vice versa. When it comes to the cross bars, the Thule Vortex Aero Bars # TH711520 and Inno Aero Crossbars # INXB123-2 are going to be very close to the same size and they will mount in a similar manner on a foot pack, so you are able to use an Inno Aero Crossbar on a Thule tower...
  view full answer...
• What are the Dimensions of the Thule Square Bars
  I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like # INB137.
  view full answer...
• Will the Thule Hullavator Pro Kayak Carrier Work W/ Inno Square Crossbars?
  I'm not quite sure what you're asking, but let me see if I can clear some things up for you. The Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs # TH898 is compatible with both the Inno Crossbars # INB137 you were looking at as well as your Thule crossbars that have the channel down the middle. Since you already have crossbars you don't need to use the Inno bars . The only reason you'd need to swap your bars out would be if you don't have 4"-8" of overhang past your...
  view full answer...
• Roof Rack Recommendation for 2018 Hyundai Tucson to Carry Thule Hullavator
  To install a Thule Hullavator on your 2018 Hyundai Tucson with a naked roof (thanks for picture), you will first need to install a roof rack. For that you'd want the Inno Square bar roof rack part numbers # INB137, # INSUT, and # INK680 which is a confirmed fit and will give you bars that the Hullavator can attach to.
  view full answer...
  
• Solutions for Carrying Spare Tire on 2009 Toyota RAV4 Sport
  From what I understand, the 2009 RAV4 Sport was originally equipped with run-flat tires which explains why they typically didn't come with a spare tire or a good place to store one. The Buyer's Products # 3375201010 spare tire carrier is a universal fit item, so Buyer's Products doesn't offer specific mounting instructions or guidance. It would be up to the end user to determine the best placement and do the measuring to determine if the tire and mount would fit in the desired location....
  view full answer...
• How to Use Surco Safari 5.0 Cargo Basket on Roof of 2015 Chevy Suburban with OEM Roof Rack
  Hey Michael. so the Surco Safari Cargo Basket # S5072 can be used on the roof of your 2015 Chevy Suburban that has factory crossbars but not to them directly. The only way is to use the square bar adapter part # SPT400 and then install the Inno square bar roof rack # INB137, # INXP, # INTR154. I wish there was a simple way to attach it to your factory rack but that's not how the rack works unfortunately.
  view full answer...
• Fitment of Older Yakima and Thule Systems on a 2014 Nissan Frontier and 2015 Ford C-Max
  Thank you for all of the info and the pictures! When I looked at everything it sadly looks like none of your current older equipment will fit your newer vehicles save for the Thule bars on the C-Max. For your 2014 Nissan Frontier you can either use a 1 or 2 bar roof rack with a load extender or a ladder rack (or by itself) if you want. Here is a list of the following: 2-bar roof rack: 54" Vortex Crossbars - # RRVA137B-2 2500 Series Legs - # RRRLKVA Fit Kit - # DK374 1-bar roof rack: 54"...
  view full answer...
  
• Recommendations on How to Safely Carry 12 Foot Jon Boat on Roof of 2013 Hyundai Tucson
  A great choice would be a Inno Square bar roof rack, which would be made up of the following parts: 54 inch square profile crossbars part # INB137 Inno Feet for Crossbars, part # INSUT Vehicle specific clamp kit, part # INK605 To secure the boat to the roof, using ratchet straps like # IMF14256 hooked over the crossbars would provide a secure hold for the boat. Using foam blocks like # MPG152 would protect the roof rack from the boat and vice versa, as well as adding some friction to...
  view full answer...
• Will SportRack Roof Rack # SR1002 Fit a 2017 Civic EX 4Dr
  We do carry roof rack systems that fit your 2017 Honda Civic but the SportRack, part # SR1002, is not one of them. It only fits the Civic through 2013. Instead I recommend the Inno square bar system consisting of parts # INB137, # INSUT, and # INK684. This is the most cost effecient rack that fits your car.
  view full answer...
• Recommended Kayak Carrier for 3 Kayaks on 2008 Toyota Highlander
  I envy your choice of lakes for your kayaking, but I can relate to the convenience of nearby water since I have to go only 1/4-mile to hit the lake in my kayak! If your 2008 Toyota Highlander has a factory-installed roof rack with crossbars that run side-to-side then you can use the Thule Kayak Stacker # TH830. The Stacker handles up to 4 kayaks up to 10-feet in length and holds them on their sides. Please click on the video link provided. If you don't have a factory roof rack but do...
  view full answer...
• Roof Rack and Kayak Carrier for 2020 Honda Civic Hatchback
  Yes the Inno Roof Rack system consisting of the 54" bars # INB137, Inno Feet for Square Crossbars # INSUT and the custom fit kit # INK684 will fit the 2020 Honda Civic Hatchback. The etrailer J-Style Kayak Carrier also fits this roof rack. It is not just as economical choice. The fold down feature is normally found in higher end carriers and I really like the included straps and anchors. This makes securing your Pelican Trailblazer 100 NXT much easier on your vehicle. I attached a video...
  view full answer...
• What Feet Can I Use to Mount Older Thule Square Crossbars on My 2012 Toyota Sienna with Raised Rails
  I have the part you need! Since Thule discontinued their old feet that are compatible with the older square crossbars without a bottom channel, Thule doesn't make feet that are compatible. However, Inno uses the same exact square crossbar dimensions 7/8" tall x 1-1/4" wide as Thule. Also, since the Inno crossbars do not have a bottom channel, they work perfect with your older square crossbars. The feet you need to complete your setup on your 2012 Toyota Sienna with raised rails is the...
  view full answer...
• Will Inno Square Bar Feet Work w/ Older Thule Square Bars?
  Yes, they can so long as your Thule square bars don't have slots on the bottom. The Inno Feet for Square Crossbars item # INFR work with the Thule square bars that measure 7/8" tall x 1-1/4" wide. The Inno Feet item # INFR will fit the raised rails on a 2023 Subaru Outback wagon. What are you planning on using your roof rack for?
  view full answer...
• Rack for 2009 Dodge Durango to Carry Ladders
  The MaxxTow Van Ladder Rack MT70440 won't work with a 2009 Dodge Durango but we may have a different option for you to consider. To help carry your ladders, if your Durango has the factory installed side rails, I recommend simply adding an inexpensive roof rack, the Curt Roof Rack Crossbars for Raised Side Rails # C18118, which has crossbars that are 53-3/8" long, or the longer 58" bars of the Malone SteelTop Roof Rack # MPG202. I have added links to video reviews of both options for you...
  view full answer...
• Is There A Universal Roof Rack That Can Use Thule Load Bars?
  Hi Greg! If the 2018 GMC Acadia you entered in our fit-guide is what you are wanting to put this on, then we might have something for you. If you have factory raised rails, you could use the Inno Feet for Square Crossbars - Raised Side Rails - Black - Qty 4 # INFR. We have found the Thule Square Load Bars fit Inno towers and this would clamp around the factory raised rails pretty easily. If you have a naked roof though, there will not be a way to get anything to fit properly, unfortunately....
  view full answer...
• Availability Of Replacement Set Of Keys For An Inno Roof Rack
  It looks like you are looking for a replacement key for an Inno roof rack. While we do not carry a 1254 key from Inno, we do have a T254 key # IN43RR. Is it possible the number 1 on your key is actually a letter "T"? If so, the # IN43RR will be the correct key for you.
  view full answer...
• Parts to Install Inno Square Bar Roof Rack on 2023 Chevy Traverse Raised Rails
  The Inno square bar roof rack that fits the raised rails on your 2023 Chevy Traverse includes the following parts: - 54" Square Crossbars # INB137 - Inno Feet # INFR As long as your crossbars are at least 54" you just need the feet and you're good to go!
  view full answer...
• What Foot Pack Can I Use to Fit My Older Thule Square Bars on My 2014 Subaru XV Crosstrek?
  If you have older, pre-channel Thule SquareBars, I do have some option for you. If you happen to have raised factory rails on your 2014 Subaru XV Crosstreck, a compatible foot pack that will work is the Inno Feet for Square Crossbars - Raised Side Rails # INFR. This is because the Inno Square Crossbars like # INB127 have the same 7/8" tall x 1-1/4" wide dimensions as the Thule bars. With that being said, there is no solution if you have a bare roof. The only other option is to purchase...
  view full answer...
• Are Inno Square Roof Rack Bars the Same Dimensions as Thule Crossbars
  The Inno crossbars of the roof rack you mentioned part numbers # INB117 and # INFR match the same dimensions as Thule crossbars at 1-1/4 inches wide and 7/8 inches tall. This rack will work with your Thule roof bike racks that are designed to fit square crossbars.
  view full answer...
• Thule Square Bar Roof Rack Parts Needed for a 2023 Subaru Outback Wagon
  To install a Thule square bar system on your 2023 Subaru Outback Wagon you need the following legs depending on what version of the Thule square crossbars you have: New Thule Square Bars with Limited Slot Underneath - Evo Raised Rail Feet # TH710401 Old Thule Square Bars with Slot All the Way Through Underneath - Inno Feet # INFR When Thule redesigned their square bars they made it so the bars install on the feet using the slot method instead of the brackets fitting over the bars and...
  view full answer...
• Are Thule Square Bars Compatible With Inno Feet
  Rob, the Thule square bars and the Inno square bars have the same measurements so the Inno feet would be compatible. So if you have factory raised rails then you're going to need the Inno Feet for Square Crossbars # INFR, but if you have flush mounted rails you're going to need the Inno Feet for Square Crossbars # INXP with the Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # IN33FR.
  view full answer...
• What Feet Can I Use with My Older Thule Square Crossbars on My 2008 Volvo XC70 with Raised Rails?
  If you have older Thule square load bars that do not have the bottom channel, there is a way to use a different manufacturer's feet with your 2008 Volvo XC70. For that route, I recommend using the Inno Feet for Square Crossbars # INFR. These feet are designed to fit Inno square bars that measure 7/8" tall x 1-1/4" wide. Since the Thule square load bars have these same dimensions, you can use the Inno # INFR on your vehicle's raised rails. We've had dozens of neighbors who have used this method.
  view full answer...
• What Inno Square Bars do You Carry over 50 Inches Long for My 2022 Chevy Equinox?
  Yes! We do carry longer Inno Square Crossbars than the # INB127. For longer sizes, here is what we carry: - Inno Square Crossbars - Steel - Black - 58" Long # INB147 - Inno Square Crossbars - Steel - Black - 65" Long # INB165 - Inno Square Crossbars - Steel - Black - 71" Long # IN434 - Inno Square Crossbars - Steel - Black - 79" Long # IN436L It is important to note that Inno recommends the 50" # INB127 maximum crossbar length for your 2022 Chevy Equinox. If you go with longer crossbars,...
  view full answer...
• Can Hullavator and J-Style Carrier be Used to Carry Two 40 lb Kayaks on a 2003 Honda Odyssey
  We do have an option for you to use a roof rack to carry your kayaks but I am unsure as to the weight capacity of the roof of your 2003 Honda Odyssey. The Inno roof rack that we carry has a weight capacity of 140 lbs which would allow you to use the Hullavator # TH898 and the Hull-A-Port # TH834, but if your roof itself doesn't have a weight capacity of at least 135 (weight of the kayaks and both carriers combined) then you will be overloading your roof. The Thule roof rack options for...
  view full answer...
• Can I Put Thule Square Crossbars On My 2018 Subaru Outback Limited Wagon?
  We do have a square bar roof rack system that will fit your 2018 Subaru Outback Limited with factory raised rails. For the Towers you will want the Thule Evo feet # TH710601. For the fit kit it will be part # TH37CE. Please note that only the new Thule square bars will work with this setup. The new bars have a channel in the bottom of the bar, and the feet attach to the bottom of the bar. Old Thule square bars do not have this channel on the bottom and cannot be used with the new Evo...
  view full answer...
• How to Install Older Thule Square Crossbars on a 2020 Subaru Impreza
  Thanks for reaching out, Peter! The older Thule Podium Roof Mounted Foot Pack TH460 worked with the older style of Thule square crossbars, which is actually a good thing! When Thule released their Evo line they changed how the square bars install but we've found that the Inno square bar feet are compatible with those older Thule square bars so you'll need the following parts depending on whether your 2020 Subaru Impreza has raised rails or a naked roof: Raised Rails - Inno Feet # INFR Naked...
  view full answer...
• Carrying A Previous Generation Thule Hullavator On A 2011 Subaru Forester
  Your least expensive option would be to go with an Inno roof rack. Your older Thule Hullavator was designed to go with either square crossbars or round crossbars. The Inno rack uses square crossbars that are the same dimension as Thule's square crossbars. Your rack will consist of the following; Inno Square Crossbars - Steel - Black - 50" Long - Qty 2, part # INB127 or Inno Square Crossbars - Steel - Black - 58" Long - Qty 2, part # INB147 and Inno Feet for Square Crossbars - Raised Side...
  view full answer...
  
• Adding Roof Rack Crossbars on a 2013 Nissan Xterra to Mount Cargo Basket
  You can add crossbars to your 2013 Nissan Xterra. The aftermarket crossbars available do fit different years of the Xterra but I can't speak to the OEM bars. To add crossbars I recommend using Inno square bars # INB107 with feet # INFR that clamp around the side rails. With the bars installed and at the proper width you can mount the Thule basket # TH859XT.
  view full answer...
• Do Inno Crossbars Work With Thule Evo Raised Rail Feet
  The Thule Evo Raised Rail Feet # TH710401 do not work with other branded crossbars, but will fit any Thule Crossbar. That includes the Thule AeroBlade, WingBar, WingBar Evo, SquareBar, and ProBar. If you have Inno crossbars already then you'll want the Through Feet # INXS150 for aero-style crossbars or the Feet # INFR if you have their square crossbars.
  view full answer...
• Clearance Between Vehicle Sunroof and Roof Rack Crossbars of Inno Square Bar Roof Rack
  Roof rack makers generally do not recommend operating a vehicle's sunroof when an aftermarket roof rack is installed. Even if there is no clearance issue between the bottom of the crossbars and the top of the sunroof there would be a lot of noise from wind turbulence at the bars that would likely make you want to keep the sunroof closed anyway. Also note that any roof-rack-mount accessory item you might install on the crossbars - say a bike rack or cargo carrier - will use some type of...
  view full answer...
• How to Transport 3 Kayaks with 2018 VW Golf SportWagen
  To transport all 3 of your kayaks with your 2018 VW Golf SportWagen you will need to go with a set of roof rack crossbars and a post/stacking style carrier that mounts to them. Starting with the roof rack I recommend an Inno Square Bar System that consists of # INB137 for two 54 inch Square Crossbars and # INFR for the Mounting Feet. This will provide you with a durable system that has a 220 pound weight capacity. The mounting feet simply clamp around the factory rails on the roof of...
  view full answer...
• Parts Needed to Install Longer Crossbar Roof Rack on 2020 Toyota Sienna
  I have a 54 inch crossbar solution from Inno that will work great on your 2020 Toyota Sienna but since the tracks on the bottom of the aero Inno bars that attach them to the rack feet only goes so far across the bar you can't go with longer bars in this style than what's recommended. However the square bar roof racks from Inno attach in a way that does not limit the length of the bars at all. So you could install the 54 inch square bars part # INB137 on your 2020 Toyota Sienna but you'd...
  view full answer...
  
• Parts Needed to Use Old Thule Square Crossbars on 2020 Toyota RAV4 With Raised Rails
  Assuming you have the older Thule square crossbars and not the SquareBar Evo, and also that your 2020 Toyota RAV4 has raised side rails, you can mount those square bars with the following: - Inno Feet for Square Crossbars - Raised Side Rails # INFR For flush rails use # INXP and # IN33FR
  view full answer...
• Are Crossbars Required for the Inno Board Locker Surfboard Carrier Part # INA744
  In order to use the Inno Board Locker Surfboard Carrier part # INA744 on your Jeep Patriot with raised side rails you would need a set of crossbars. Unfortunately, none of our watersport carriers are designed to attach directly to the raised side rails. Generally speaking, almost all rooftop carriers are designed to attach to crossbars for the exception of some ski carriers and cargo bags. For your Jeep Patriot, I recommend using the Inno Square Crossbar Roof Rack System part # INB117...
  view full answer...
• What is Needed to Install the Yakima RocketBox Pro 14 Cargo Box on a 2011 Dodge Journey
  The Yakima RocketBox Pro 14 Cargo Box, part # Y07192, will fit your 2011 Dodge Journey if you have the factory roof rack with cross bars that run from side to side. If your 2011 Dodge Journey has just the factory installed side rails that run from front to back you will need to use the Inno Square Bar Roof Rack, parts # INB127 and # INFR. These parts will attach to your factory side rails and supply the cross bars that are needed for attachment of the Yakima RocketBox cargo box. The last...
  view full answer...

Do you have a question about this Roof Rack?