Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y59KB
Our Price: $688.85
Confirmed to Fit
2017 Chevrolet Tahoe
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
- All Info
- Reviews (156)
- Q & A (0)
- Videos (60)
- Photos
Yakima Roof Rack - Y59KB
- Aero Bars
- Crossbars
- 60 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 60" Long - Black - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima Landing Pad 17 Fit Kit:
- Provide mounting points for Yakima SkyLine or Control towers
- Pads install in the fixed mounting points inside your vehicle's flush, factory side rails
- Protect your vehicle from scratches with UV-resistant, rubber base pads
- Include snap-on covers for protection when towers are not in place
Yakima SkyLine Towers - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with fixed mounting points, flush side rails, or tracks
- Pair with 2 Yakima crossbars and Landing Pads to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Easy, tool-free installation - just drop tower onto Landing Pad and close the cover
- Included torque tool clicks 3 times when crossbar is tightened to tower - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant die-cast aluminum, stainless steel, glass-reinforced plastic, and elastomer construction
8000243 Landing Pad 17 for Yakima SkyLine and Control Towers - Qty 4
8000426 Yakima Jet Stream Cross Bars - Aluminum - 60" Long - Qty 2 - Black
8000163 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000148
Video of Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Installation - 2022 GMC Sierra 1500
How's it going, everyone It's Ethan here with etrailer. Today we're going to be taking a look at the Yakima Roof Rack System with our JetStream crossbars and showing you how to install them on our 2022 GMC Sierra. If you're transporting a large amount of items or just large items in general and you don't have room in your bed, or they're just items you'd rather keep out of the cabin of your vehicle, a roof rack system like this is gonna be a good way to do that. The crossbars that we have here are an aerodynamic shape so they taper in the back just to cut down on some of that wind noise and wind resistance. With any sort of roof rack system, you'll get a little bit, but this is nice that it cuts some of that down. Additionally, it does feature this rubberized strip inside this T-track slot, so you can use these roof rack with T-track accessories and there's no need to trim the actual strip to get those on.
As far as the length of our crossbars go, there are a couple of different options as far as length. These are 60", which we found gives us enough room on top and enough overhang. The overhang that we have, we're measuring at 5", which gives you a little bit more room for accessories without being overbearing or sticking over your vehicle too much. With a weight capacity of 165 pounds, these crossbars will do a fine job of storing most of the bigger items that you might need, but something to keep in mind when you are storing those items is are they going to make contact with the top of your roof So we'll just measure from the roof to the bottom of our crossbars. It's about 3 1/2", so if your accessories do have clamps or things that hang onto the crossbars, you wanna keep that measurement in mind.
Additionally, to see how much height we're adding to the top of our vehicle is about 4 1/4", so if you live with these crossfires on your vehicle, that's how much you're gonna be adding to it. Additionally, if you have taller bindings on your skis or things like that, that's a good measurement to keep in mind to see if those will make contact with your vehicle as well. To start the install process, we like to just lay everything out, making sure that we know what everything is and that we have it. So we're going to obviously have our crossbar here, two towers, the covers for the towers, two hooks that'll keep the actual feet in place, two pads for the bottom, and our end caps. Additionally, there is a provided tool and we recommend going ahead and grabbing a fabric tape measure.
They do provide one, but we have our own. We'll start by assembling our towers. First thing, we probably want to loosen this metal plate here. We do that first actually by releasing this security lever. As you can see, it covers it.
If you pull it back, you have access to get in there. So we'll loosen that. And in our case, there are three different steps for the GMC Sierra that we're going to be putting these on. They do recommend setting it to C, but make sure you check the manual and see what's recommended for your vehicle. Now the next step is to get the actual feet on the towers. So ours came with a plastic cover. We just removed that, and making sure that this arrow on the tower is facing out, it just snaps into place. (feet snapping onto tower) And now we can go ahead and slide this onto our crossbar. Because we loosened that metal plate earlier, it should just slide right onto our track like so. Make sure you consult the manual to see the specific measurements for your vehicle, but as you can see, there are little ruler notches on the actual crossbars themselves, so using those will slide the feet to the point where we need it, which is right about here, in our case, and we can get that tightened down. (screwdriver twisting) Once we have our feet on, we can put our end caps back on just like that. As you can see, we already have our first crossbar installed. We got our measurement from the end of our glass windshield here and took it up to the front of the tower. It's going to be vehicle specific, but we have it where we need it in our case. Now we can fit our crossbar onto the roof of our vehicle, trying to do it as carefully as possible. The pads on the bottom should make it a little bit nicer on top of your vehicle, but we'll get it vaguely where we need to be and adjust it. When you actually place the crossbars on top of the vehicle, these feet are nice 'cause they will actually fit in the ridges on top of your roof. Now that we have our crossbars roughly where we need them to be, we'll take a measurement to make sure that the crossbar spread is what's recommended for our vehicle. In our case, it is 32", so we're about there. Just slide this forward a little bit and that's pretty good. Now we'll get clamps installed as well, starting by opening up that security door again, sliding it through, and all we have to do is get our tool through the middle of there and tighten it, probably not all the way just yet. We're gonna have to adjust our other side and we'll probably wanna go back and forth tightening it down just to make sure that one side isn't over-torqued. We've tightened the other side to where we need it to be and this one's about where we need it as well, so we'll close that security gate up and we can fit our racks back, or the end cap back on starting with these cringes down at the bottom and click that in place. Once you've done that, that's basically it. Fairly simple installation, as long as you know where all the pieces are and what they do, but you're ready to hit the road. Overall though, I think that the Yakima Roof Rack System is a sleek and pretty effective roof rack system. I like that the arrow bars will cut down on that wind resistance and I really like that rubberized strip that I don't have to trim. Now, if aesthetics are something that's really important to you, we found that the Rhino-Rack Roof Rack System looks just a little bit sharper, but I like the install of the Yakima Roof Rack System a little bit better, just a little bit easier if you're gonna be taking it on and off a lot, in my opinion, and overall, I think that it's a really nice fit on our 2022 GMC Sierra.
Customer Reviews
Yakima SkyLine Roof Rack for Fixed Mounting Points - JetStream Crossbars - Aluminum - Black - Qty 2 - Y59KB
Average Customer Rating: 4.8 out of 5 stars (156 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: Eric 05/13/2024
Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
by: John11/16/2023
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
by: Bob L11/30/2023
product was just what I needed The folks at etrailer were extremely helpufl!!
by: William02/28/2024
You guys provide great products and excellent customer service.
Thanks
by: DogDoc04/12/2024
Ford Expedition
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
by: Layne 02/11/2024
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
by: Elliott08/04/2018
2015 Jeep Grand Cherokee
I have a 2015 Jeep Grand Cherokee SRT which has the non-functional roof side bars. Etrailer.com helped me figure this out and gave me several options that would work. As I already have Yakima bike racks - I wanted to stick with the brand. The price on etrailer.com was the same as Yakima but had free shipping and no tax - awesome. Product arrived quickly!
I went with the Yakima 60" Jetstream cross bars, baseline towers, and the appropriate pads and clips.
The Yakima product came with thorough and easy to understand instructions. I was able to get the track installed and working in about an hour - and that was taking it slow and double checking everything. I was very pleased with the fit and finish.
After a test run, there was no wind noise or issue with the rack. Looking forward to taking a road trip next month with it!
by: Michael01/22/2023
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
by: Rod12/05/2021
2010 Jeep Grand Cherokee
Product exactly as expected. Quality bars. Using on a 2021 Jeep Grand Cherokee L. Looks great installed. Little to no wind noise. And, as usual, top notch service by the etrailer crew! Have purchased several items from etrailer over the past 10 years and have always been impressed by how timely they are and how responsive and helpful they have been regarding product questions. They are absolutely the first merchant I go to when shopping on line!
by: John 08/31/2017
2015 Ford Fusion
The Yakima rack system for my 2015 Ford Fusion is an awesome product! I hadn't needed to buy aftermarket racks in many years. These are a super solid, beefy, and very well made product. I am very impressed with the quality and fit. Yakima has obviously put lots of design time into them. And etrailer does an outstanding job of making sure you get the right product for your specific need.
I chose this rack specifically because of the spread between the bars - 32" - and for the higher weight limit, as I'm carrying a fishing kayak.
by: 10/06/2023
Love it! We've made several long trips with full luggage loads.
by: Dan 11/06/2023
Great company. Fast delivery.
by: Frank02/10/2023
Ford Edge
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
by: Andrew04/04/2023
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
by: Joseph08/23/2021
Pontiac Trans Sport Van
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
by: Andrew08/01/2023
Great! Easy to install!
by: RC01/05/2023
They were more helpful than Yakima identifying the correct part, arrived a day early. Nothing to complain about, great service.
by: Joao07/18/2023
Great service and great staff. They will have all the technical information you need.
by: Daryl04/29/2020
Jeep Cherokee
These Yakima crossbars are a part of the Yakima towers I bought to install on my Jeep Cherokee to hold a pair of Kayaks. They fit great as advertised. In fact I got these discounted as an open box. I would have never known, they look brand new. Thank you etrailer for your great advice, customer service and quick shipping process.
by: Gustav05/23/2021
Easy Install.
But, the instructions tell you torque bolts to 48 in lbf or 5.4 Nm, with the L shape security wrench.
How do you apply a specific torque to a L shaped wrench?
Can't put a torque wrench on it.
My question and reason for 4 stars is for Yakima. Why not supply a preset torque driver like the one supplied for the Skyline Tower installation?
Overall I'm quite pleased.
by: Philip 05/29/2023
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
by: Diane 07/28/2023
SIMPLE & EASY1
by: SJHughes12/23/2017
High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.
by: Greg N.11/18/2021
Ford Expedition
I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!
by: Ryan. K05/25/2020
Very sturdy hold with a matte look and fine textured feel. Very light making for easy install.
25
649
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Roof Rack for 2004 Toyota 4Runner to Carry Yakima Showdown Kayak CarrierThe Yakima Jetstream roof rack part numbers # Y00426 and # Y00147 that fits your 2004 Toyota 4Runner would do a great job carrying the Yakima Showdown part # Y04081. The Jetstream is very aerodynamic which helps with wind noise, is easy to install, and is one of the highest quality roof racks out there so you'll be very happy with it.
view full answer... - Can Only One 60 JetStream Crossbar be Used for 2016 Ford F-150Yes! A complete 60" JetStream roof rack for your 2016 Ford F-150 consists of parts # Y00426, # Y28TR, and 2 of the # Y06122. For just one crossbar setup you only need parts # 8880649, 2 of the # 8880618, and 1 of the # Y06122.
view full answer... - Roof Rack Recommendation for 2021 Jeep Grand Cherokee with Flush Black RailsTo add a roof rack to your 2021 Jeep Grand Cherokee with the flush black rails you'll need the crossbars, leg kit, and a fit kit. I really like the Yakima JetStream because it's a high quality system with adjustments in the legs to give you the best fit possible. Here are the parts you'll need: 60" JetStream Crossbars - # Y00426 BaseLine Towers - # Y28TR Fit Kit - # Y06121 Lock Core Kit - # Y07204 (optional) If you let me know what you plan on using the roof rack for I'd be more than...
view full answer... - Recommended Roof Rack for a 2018 Ford Expedition w/ Factory Raised Rails I would be happy to help you. To add a roof rack to your 2018 Ford Expedition's factory raised rails, you will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This roof rack is rated to carry rooftop tents and includes aero shaped crossbars to help reduce wind noise and are better with fuel efficiency....
view full answer...
- Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru OutbackThe Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
view full answer... - What Landing Pads do I Need to Use the 54 Yakima Tracks # Y01127?For the Yakima Tracks - 54" # Y01127, you need a set of the Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 for each crossbar. In addition to that, to have a complete setup, I recommend using the SkyLine Towers for Yakima Crossbars - Track Systems - Qty 4 # Y53TR and the Yakima JetStream Crossbars - Aluminum - Black # Y00425 (50 inches) or the # Y00426 (60 inches).
view full answer... - Roof Rack Recommendation for 2018 Honda Pilot that Allows Sunroof to Open PotentiallyWith aftermarket roof racks you really don't want to open the sunroof of the vehicle as it will create quite a bit of noise. I checked with other roof rack manufacturers and Yakima, for example, only has the line: If your vehicle is equipped with a sunroof or panoramic glass roof, prior to operation, ensure adequate clearance exists with roof rack and/or accessories installed. So the Yakima JetStream rack part numbers # Y00426, # Y28TR, and # Y06152 would be a great option that has similar...
view full answer... - Recommended Roof Rack System For 2015 Mazda 3 For a Roof Top TentI would be happy to recommend a roof rack for your 2014 Mazda 3 5 Door Hatchback for carrying a 165lb Roofnest Rooftop Tent. If your Mazda 3 has fixed mounting points on the roof I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pads # Y00248. If your Mazda 3 does NOT have fixed mounting points then I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars - Aluminum...
view full answer... - How to Fit a Thule Hullavator Pro on a Tesla Model 3The Thule # TH898 Hullavator Pro can be installed on Aero cross bars on a Tesla Model 3 as long as the cross bars extend past the mounting feet by 4 inches to 8 inches, and the cross bars are separated by at least 24". If you do not already have crossbars you can use the Yakima parts # Y00426, # Y28TR, and # Y06173 for 60" JetStream Crossbars. i have attached links to each of these products and and install videos.
view full answer...
- Recommended Roof Rack for a 2020 Toyota HighlanderI have an excellent roof rack for a 2020 Toyota Highlander (All Models) in the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y28TR, part # Y06153, and part # Y06132. The Jetstream system is one of the best fitting options on the market and what this means is that it will will blend in well with the vehicle making for the best overall appearance. The system has rubber pads to protect the vehicle's surface and aero crossbar which offer the best wind resistance. I...
view full answer...
- Will Yakima JetStream Roof Rack Fit a 2020 Ford Explorer with Raised RailsYes, the Yakima JetStream roof rack system, parts # Y00426 and # Y33TR, will fit the raised rails on your 2020 Ford Explorer. I really like this system because it's easy to install but is also great quality and reduces the amount of wind noise and drag you experience due to the aerodynamic crossbars. If you would like to add locks to this system then you can do that with part # Y07204 as well.
view full answer...
- Best Roof Rack for 2020 Toyota Highlander with Naked RoofIf this were my 2020 Toyota Highlander the roof rack I would put on it would be Yakima because it will give you a larger amount of crossbar space than most racks so you can hold the most gear, it is extremely quiet, highly durable and looks fantastic. The rack that fits your 2020 Toyota Highlander with a naked roof is made up of the following parts: - Yakima JetStream Crossbars # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06153 and # Y06132 - Same Key System...
view full answer... - Can I Use Shorter Bars With 2020 Kia Telluride LX Yakima Roof RackYes, you can use the 50" Yakima JetStream bars part # Y00425 on the 2020 Kia Telluride LX with a naked roof. The 60" bars part # Y00426 are recommended by Yakima but it is possible to use the 50" bars if you would like to. I do agree that the 70" bars look too long for the Telluride. You can use the 50" JetStream bars part # Y00425 with BaseLine Towers for Yakima Crossbars part # Y00146, fit kit part # Y06125 with part # Y28TR. You could also use the 60" bars part # Y00426 with the same...
view full answer... - Ladder Carrying Options for 2019 Honda RidgelineUnfortunately, I don't show any ladder rack fits for a 2019 Honda Ridgeline. If the needed capacity is 165 lbs or less, a roof rack would allow you to carry a couple of ladders as long as their combined weight doesn't exceed the rack's capacity. If this is something you might be interested in the actual parts needed will depend on the current setup of your roof. Rhino-Rack offers a high quality roof rack that's less expensive than the better known brands, which is why I tend to recommend...
view full answer... - Parts Needed to Add Yakima Rack to Thule Tracks on Leer CamperYep, you can put a Yakima roof rack in the Thule tracks on your Leep truck cap. I'll go ahead and list out the parts you need: - (Order a quantity of 2 of these) Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - SkyLine Towers for Yakima Crossbars # Y53TR - 50" Long Yakima JetStream Crossbars # Y00425 OR - 60" Long Yakima JetStream Crossbars # Y00426 OR - 70" Long Yakima JetStream Crossbars # Y00427 You'll want to measure the width of your tracks and get ones that extend...
view full answer... - Can 2023 Toyota RAV4 w/ Flush Rails Use 60 Inch CrossbarsSo I cannot say I've ever heard of someone using a Dremel or anything so they could use longer Thule crossbars, and I gotta say that besides the warranty being voided like you mentioned, it could cause some unforeseen issues with stability, capacity, etc. I absolutely understand not wanting to have to get a whole new roof rack but for best safety practices, that's the right way to go. You can get 60 inch crossbars on your 2023 Toyota RAV4 with flush rails by using Yakima bars like you...
view full answer... - Recommended Roof Rack for 2019 VW Atlas With Raised Side RailsFor your 2019 VW Atlas with raised side rails I highly recommend going with an option from Yakima, which consists of the Yakima Jetstream Crossbars # Y00426 and TimberLine Towers for Yakima Crossbars # Y33TR. This will give you a roof rack which not only looks great but uses aero bars with ridges that helps give you a very quiet ride. The bars are 60" long to fit the width of your Atlas and have T-slots which will allow you to use channel-mounting accessories. I also recommend using SKS...
view full answer... - Determining Correct Rhino-Rack Fit Kit For 2015 Mazda 3To install the Rhino-Rack Roof Rack System for fixed mounting points you will first need to verify that your vehicle has fixed mounting points, and you or the installer of your choice will need to drill the holes in the rain gutter trim to access the fixed mounting points of your 2015 Mazda 3. I attached a picture from the instruction manual for the Rhino-Rack Fit Kit # DK410 that is confirmed to fit the 5-door Model that has fixed mounting points, which goes over how to add a hole to...
view full answer...
- Converting Yakima Timberline Towers To Work With Yakima Jetstream CrossbarsAll you need is this T-Bolt Adapter # Y03541. It will take the place of your RoundBar Adapter # Y03536 and will work with the Jetstream Crossbars # Y00426
view full answer... - Will 2019 Toyota 4Runnner Factory Roof Rack Fit With The Yakima Skybox 16Good News! We have a solution that will make it fit, but due to low crossbar/roof clearance, the Yakima SkyBox NX 16 # Y95AV is not ideal for your factory bars. You have two options, if you want to use your factory roof rack system, you will need another box. The Inno Ridge # INBRA220R-BK has much lower profile mounting hardware and won't cause issues with your roof. If you are set on the Yakima Skybox NX 16 what you need is an extra set of crossbars. I like Yakima products and the...
view full answer... - Roof Rack Fit on 2021 Ford Bronco SportThere is a fit for a roof rack for your 2021 Ford Bronco Sport, so long as it has raised side rails. The rack that fits is from Yakima, and consists of just a couple parts: - Yakima JetStream Crossbars - # Y00426 - TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR This rack will give your '21 Bronco Sport a roof rack with 60 inch long crossbars which are also super quiet, easy to use, and have a 165 lb weight capacity. The JetStream crossbars are aerodynamically...
view full answer... - Recommended Roof Rack System For A 2022 Mercedes GLS Hauling Multiple KayaksSince you're wanting to go with crossbars longer than what any manufacturer has designed for your 2022 Mercedes GLS you'll need to go with a Yakima system since they're the only ones with a mounting track that runs the entire length of the crossbar. There's a bit of gap in options between 60" and 70" so you'd have to either go with the Yakima JetStream Crossbars - 60" Long # Y00426 or two of the 70" # 8880650. To connect the crossbars to the factory rails on your GLS you'll need the TimberLine...
view full answer... - Does the SportRack Horizon Rooftop Cargo Box Fit on the 2019 Ford Edge without a MoonroofThe SportRack Horizon Rooftop Cargo Box, part # SR7011, is designed to fit a variety of crossbars (including factory bars), so it will not be a problem fitting on your 2019 Ford Edge. If you do not have a roof rack and have no rails, I recommend the Yakima JetStream Crossbars, part # Y00426. They are aero-style bars that reduce wind drag and noise. To mount them, you will need the BaseLine Towers, part # Y28TR. You will also need the two fit kits, # Y06102 and # Y06139. I've linked to...
view full answer... - Can I Put a Tent on Top of My 1995 Jeep YJ with a Hardtop?While we do have roof rack systems that will fit your jeep, the issue is that your roof has a maximum weight capacity of 100 lbs. Even if you got the roof rack system with parts # Y00426, # Y01126, # Y53TR, # Y00221, you wouldn't have enough weight capacity for a tent. For example, the Yakima Sky Rise Tent # Y07436 weighs 101 lbs on its own and requires a roof weight capacity of at least 165 lbs. Your options from here is to either try to find an exo-style system to increase your roof...
view full answer... - Rack to Mount On Truck Bed Rails for 2013 Toyota Tundra with Tonneau CoverIt is possible to install the Swagman Roamer LT Roof Rack # S80510 on the bed rails of your 2013 Toyota Tundra. However, I see a couple of potential compatibility issues between the rack and tonneau cover that it will be important to consider. The crossbars of the rack will not allow the tonneau cover to fold back, if it is a hard tonneau cover. Even removing the crossbar from the foot may not provide enough clearance for the tonneau, as the base of the foot extends inward, toward the truck...
view full answer... - Roof Rack Recommendation For A.R.E. Camper Shell For A 2016 Ford F-150 Short BedThere will not be any need for pictures. If you have factory rails on top of your A.R.E. camper shell, I can find a roof rack to fit. Yakima makes the factory rails for your camper shell. The compatible roof rack will consist of the following items: Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2, part # Y00422 SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems - Qty 4, part # Y53TR Landing Pad 1 for Yakima SkyLine and Control Towers...
view full answer... - How to Transport 3 Bikes 1 E-Bike with a 2018 Subaru Outback WagonI do have a recommendation for you, but with your specific bike rack needs you don't be able to use your 1-1/4" trailer hitch on your 2018 Subaru Outback Wagon to carry all 3 bikes. Either the bike rack is way too heavy and requires a 2" receiver, like the Draw-Tite # 76227, or it doesn't have the attachment option you need, plus the weight capacity for your heavier bike. For your application you'll need to use a hitch bike rack and a roof mounted bike rack. The hitch mount bike rack I...
view full answer... - Availability of Longer Crossbar Roof Rack that Fits 2014 Jeep WranglerWe have a 55 inch long crossbar roof rack that fits your 2014 Jeep Wrangler hard top with the Yakima rack part numbers # Y01156, # Y53TR, # Y03541, # Y00226 but Sportrack does not have a way to change the crossbar length of your current rack. If you preferred something a little easier on the ole wallet Yakima also has a round bar rack with the part # Y00409 and # Y00101 which is 58 inches long.
view full answer... - Will Thule Hullavator Fit a Yakima Roof Rack on a 2018 Subaru OutbackThe Thule Hullavator, # TH898, will fit on a Yakima roof rack so if you like the spacing and looks of the Yakima racks you can certainly go that route for your 2018 Subaru Outback. With the Hullavator the roof rack crossbars need to stick out past the mounting feet by at least 4 inches. What this means you will need to use longer bars than what would normally be recommended for the vehicle. If you go with a round bar system then you will need the following parts: Crossbars # Y00409 SkyLine...
view full answer... - Parts to Install Yakima 78 HD Crossbars and Watersport Carriers on a 2014 Jeep Wangler UnlimitedTo use your 78" Yakima HD Crossbars, part # Y01159, on your 2014 Jeep Wrangler Unlimited, you will need the Yakima 42" Tracks, Skyline Towers, HD Bar SL Adapters, and Landing Pad 1s. The Track Pads, part # Y01126, are designed for use on naked roofs (those without rails). They give a more flush look for the roof rack system. This will require some drilling into the hard top, but they allow you to slide the crossbars along the length of the Jeep. The Skyline Towers, part # Y53TR, are designed...
view full answer... - Recommended Roof Rack for 2024 Subaru OutbackFor a stylish roof rack that keeps the noise down on your 2024 Outback I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00425 -SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails, and Track Systems # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream bars have a sleak look with an asymmetrical JetFlow shape. This combined with the built-in WindRidges seriously reduces vibration...
view full answer... - What Landing Pads do I Need to Use the 54 Yakima Tracks # Y01127?For the Yakima Tracks - 54" # Y01127, you need a set of the Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2 # Y00221 for each crossbar. In addition to that, to have a complete setup, I recommend using the SkyLine Towers for Yakima Crossbars - Track Systems - Qty 4 # Y53TR and the Yakima JetStream Crossbars - Aluminum - Black # Y00425 (50 inches) or the # Y00426 (60 inches).
view full answer... - Will the Yakima OffGrid Roof Cargo Basket Fit a Subaru Outback and Toyota Rav4's Roof RackThe Yakima OffGrid Roof Cargo Basket # Y07138 (medium) works with round, square, aero, elliptical, and most factory crossbars. This basket will work with the factory bars on your Subaru and the factory bars for your Rav4. I also listed aftermarket options that work with your Rav4 and the Yakima OffGrid Roof Cargo Basket. There are 3 different roof styles for the Rav4, so I have listed an option for each. Naked Roof 2023 Toyota RAV4 Roof Rack by Rhino Rack - Rhino-Rack Vortex Aero Crossbars...
view full answer... - Recommended Roof Rack System For 2015 Mazda 3 For a Roof Top TentI would be happy to recommend a roof rack for your 2014 Mazda 3 5 Door Hatchback for carrying a 165lb Roofnest Rooftop Tent. If your Mazda 3 has fixed mounting points on the roof I recommend the Yakima Roof Rack System which uses 50" Yakima JetStream Crossbars # Y00425, SkyLine Towers for Yakima Crossbars # Y53TR, and Landing Pads # Y00248. If your Mazda 3 does NOT have fixed mounting points then I recommend the Yakima Roof Rack System which uses 60" Yakima JetStream Crossbars - Aluminum...
view full answer... - Yakima Roof Rack Recommendation for Cab and Camper Shell on 2022 Toyota TacomaFor a Yakima roof rack system on the cab and camper shell of your 2022 Toyota Tacoma I recommend going with the JetStream crossbars. I'll break down what parts you need for each section so it's easier to know what is paired together. Truck Cab 50" JetStream Bars - # Y00425 BaseLine Towers - # Y28TR BaseClip - # Y06145 BaseClip - # Y06128 Camper Shell 50" JetStream Bars - # Y00425 60" Tracks - Y01135 SkyLine Towers - # Y53TR Landing Pad 1 - # Y00221 (you'll need 2 of these) I also recommend...
view full answer...
- Recommended Roof Rack With Low Profile Crossbars for 2022 Mazda CX-30For a roof rack with low profile crossbars for your 2022 Mazda CX-30 I recommend the Yakima JetStream roof rack. For this rack you will need the # Y00425, # Y53TR, and # Y00248. This roof rack uses the 50" JetStream crossbars which are are quiet with an incredibly low profile. They also feature an asymmetrical JetFlow shape making them extremely aerodynamic. The rack also has the option to add locks with the Yakima Same Key System. If you would like to keep the rack secured on your vehicle,...
view full answer... - Recommended Roof Rack for a 2024 Cadillac XT4 w/ Flush Rails Congrats on the new vehicle! To add a Yakima roof rack to your 2024 Cadillac XT4 with flush rails you will need the following parts: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 item # Y00421 or item # Y00428 for silver crossbars SkyLine Towers for Yakima Crossbars - Fixed Mounting Points, Flush Rails - Qty 4 item # Y53TR Landing Pad 19 for Yakima SkyLine and Control Towers - Qty 4 item # Y00245 I recommend adding the Yakima Same Key System item # Y07204 to help prevent...
view full answer... - What Do I Need To Attach A Yakima Rack To My RetraxPro Tonneau CoverYour RetraxPro tonneau cover comes with T-slots. The Yakima rack that is compatible with t-slots will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 70" Long - Qty 2, part # Y00423, SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 1 for Yakima SkyLine and Control Towers - Qty 2. part # Y00221, X 2 Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204 This rack will have a weight limit of 220 lbs. The Yakima CoreBars are elliptical in shape...
view full answer... - What Roof Rack Do You Recommend that Will Work with a Thule Hullavator on My 2021 Toyota RAV4?To mount the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading Item # TH898 on your 2021 Toyota Rav4 with flush rails, you will need a crossbar system that gives you at least 4 inches past the feet of the system in order to function. For a great system that will give you that clearance on your 2021 Toyota RAV 4, I recommend the following parts: - Yakima HD Crossbars - Aluminum - Black - 55" # Y01156 - SkyLine Towers for Yakima Crossbars - Fixed Mounting Points,...
view full answer... - How To Replace Factory Crossbars On 2020 Subaru Outback for Rooftop TentThe highest capacity roof rack option we offer for a 2020 Subaru Outback Wagon which will replace the factory crossbars is the Yakima JetStream Crossbar System part # Y00425, part # Y53TR, and part # Y46VR which will provide a 165 lb capacity. I'd also like to point out that most tents have a built-in support device (ladder) so the roof rack only needs to be rated for a certain amount, usually 165 lbs. The Thule system only provides a 130 lb weight capacity.
view full answer... - Can 60 Inch Yakima CoreBar Roof Rack Be Used on 2021 Mazda 3You can indeed use the longer 60 inch Yakima CoreBar crossbars. To equip your 2021 Mazda 3 with a Yakima CoreBar roof rack, you'd need the following: • Yakima 60 Inch CoreBar, part # Y00422 • Yakima SkyLine towers, part # Y53TR • Yakima Landing Pad 22, part # Y00248 which attaches towers to existing mounting points on vehicle roof. I'll link to some product videos that you might find helpful.
view full answer... - 60 inch Crossbar Roof Rack Recommendation for 2020 Honda CR-VIf you went with a Yakima corebar setup you could install a 60 inch aero bar rack. So for that you'd want the SkyLine Towers # Y53TR, Landing Pad 19 # Y00245, and 60 inch bars # Y00422 and you'd be set! This attaches directly to your flush roof rails. I attached an install video for a similar corebar roof rack on a 2016 Honda CR-V for you to check out as well.
view full answer... - Best Roof Rack System for 2001 Ford E350 VanThe gutter mounts we have are actually really sturdy if you get the right ones and install them right. Technically, you should have more weight capacity off the gutter mounts since the weight is distributed vertically through the gutters vs racks bolted onto your fiberglass roof. A good system for your 2001 Ford E350 Van is the Rhino Rack system with Square Crossbars # RB1800B-2 and Gutter Feet # RL150S10. You can switch the square crossbars for aero ones with 71" Vortex Aero Crossbars...
view full answer... - Recommended Roof Rack for 2004 Chevrolet Trailblazer EXT Compatible with Rooftop TentFor your 2004 Chevy Trailblazer EXT, I recommend the Yakima roof rack consisting of the following: Yakima JetStream Crossbars - 50" Long # Y00425 (these do have the T-slots for compatible accessories) SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 1 for Yakima Control Towers # Y00221 Yakima Same Key System (SKS) Lock Cores # Y07204 This roof rack is rated for 165 lbs capacity, and will work with the Yakima SkyRise Tent for Roof Rack Crossbars - 2 Person - 400 lbs max # Y07436...
view full answer...
- Roof Rack Recommendation for 2019 Subaru Forester with Bare RoofI really like the Yakima JetStream roof rack systems because they are high quality, look great, and they have adjustments in the legs to make the crossbars level with each other. Here are the parts you'll need for your 2019 Subaru Forester: 50" JetStream Crossbars - # Y00425 SkyLine Towers - # Y53TR Landing Pad 22 - # Y00248 Lock Core Kit - # Y07204 The black strips on your roof have little cutouts you'll either flip open or remove altogether and that's where the Landing Pad 22 will anchor...
view full answer...
- Can Parts of Yakima Round Bar Roof Rack Be Reused on 2005 Honda CR-V or Toyota HighlanderAs long as the crossbars are in good condition, you can reuse the Round 48 Inch Crossbars for Yakima Roof Rack Systems # Y00408 on the 2005 Honda CR-V with naked roof. Yakima recommend the 58 Inch Round CrossBars for the 2005 Toyota Highlander, so I cannot guarantee that the 48 inch bars will fit correctly. Since you want to continue using the round crossbars, your FatCat EVO # Y03096 and Kayak Stacker # Y04036 will still fit to your roof rack for these 2 vehicles. To add the Yakima Round...
view full answer... - Parts Needed to Add Yakima Rack to Thule Tracks on Leer CamperYep, you can put a Yakima roof rack in the Thule tracks on your Leep truck cap. I'll go ahead and list out the parts you need: - (Order a quantity of 2 of these) Landing Pad 1 for Yakima SkyLine and Control Towers # Y00221 - SkyLine Towers for Yakima Crossbars # Y53TR - 50" Long Yakima JetStream Crossbars # Y00425 OR - 60" Long Yakima JetStream Crossbars # Y00426 OR - 70" Long Yakima JetStream Crossbars # Y00427 You'll want to measure the width of your tracks and get ones that extend...
view full answer... - Can 2023 Toyota RAV4 w/ Flush Rails Use 60 Inch CrossbarsSo I cannot say I've ever heard of someone using a Dremel or anything so they could use longer Thule crossbars, and I gotta say that besides the warranty being voided like you mentioned, it could cause some unforeseen issues with stability, capacity, etc. I absolutely understand not wanting to have to get a whole new roof rack but for best safety practices, that's the right way to go. You can get 60 inch crossbars on your 2023 Toyota RAV4 with flush rails by using Yakima bars like you...
view full answer... - The Kuat Grip Ski and Snowboard Carrier for a 2020 Chevrolet SuburbanThe Kuat Grip Ski and Snowboard Carrier, # GRR6B is a slide-out style carrier that will fit arrow bars, round bars, square bars, and most factory roof racks. If you have a cross-bar with T-channel option and prefer that type mount, use the T-Channel Mount Kit for Kuat Grip Ski and Snowboard Carrier, # GRDMK. If you do not already have crossbars on your 2020 Chevy, I recommend the Yakima JetStream Crossbars, # Y00426 mounted with the SkyLine Towers, # Y00148 and Landing Pad, # Y00243. Please...
view full answer... - How Do I Mount The Surco Safari Rack # SP1101 To My 2015 Chevrolet TahoeYou will need to put a roof rack on your 2015 Chevrolet Tahoe first. I recommend the Yakima JetStream Crossbars # Y00426, the SkyLine Towers # Y53TR and the Landing Pad 17 # Y00243. Now that you have a roof rack to secure your Surco Safari Rack # SU87VR to those bars. You will need to use these Clamp On Adapters # SP1101 to secure your Safari Rack to the bars.
view full answer... - Recommended Weight Distribution System for 2019 Chevy TahoeI recommend the Equal-i-zer Weight Distribution w/ 4-Point Sway Control # EQ37061ET for your travel trailer. This system has integrated 4-point sway control and uses clamp-on brackets so there is no need to drill into the trailer frame. The tongue weight capacity for this system is 200-600 lbs so your 430 lbs tongue weight falls nicely in the middle. All of the available roof racks have fixed mounting. If that works for you, there are options with longer bars. I recommend the Yakima Roof...
view full answer... - Roof Rack with 60-Inch Crossbars for 2017 Chevy Suburban with Flush Roof Side RailsThe Rola Sport REX Series Roof Rack 59685 is a confirmed fit for your 2017 Chevrolet Suburban but this rack comes as a complete kit and no other lengths of bars are available. If you prefer a longer roof rack crossbar in the 60-inch size we do have options that are displayed on the linked page. Like the Rola rack, all of these Thule and Yakima options feature aero-style crossbars that are quieter than other bar types. The most cost-effective choice is the Yakima Core Bar/Skyline rack...
view full answer... - Can I Carry A Rooftop Tent On My 2017 Chevy SuburbanThe good news is that Yakima sells rooftop tents, so their fit guide will always indicate whether their rooftop tents are compatible with their roof rack. This is a good indicator of whether other companies aftermarket roof racks will support the weight of a rooftop tent. Your 2017 Chevy Suburban can carry a rooftop tent. Before rooftop tents we had to keep track of one weight limit. This weight limit is primarily based upon the strength of the vehicle's roof. That weight limit is the...
view full answer... - Parts Needed to Install Round Yakima Bars on a 2015 Chevy SuburbanI have a solution for you, but since your 2015 Chevy Suburban has flush rails and not raised rails the RailGrabs that you have would not work. You would need to start over with the following Yakima roof rack components but would be able to use your roundbars like part # Y00409. SkyLine Towers for Yakima Crossbars # Y53TR RoundBar SL Adapter # Y03536 Landing Pad 17 # Y00243
view full answer... - Crossbars And Cargo Box For 2017 GMC YukonThe Thule Motion XT # TH629706 will fit on your roof. If you have side rails but no crossbars you'll want to get the Jetstream crossbars # Y00426 Skyline Towers # Y53TR and Landing Pad Kit # Y00243. The sooner you order the sooner they will arrive!
view full answer... - Easily Loading and Carrying 2 Kayaks on a 2017 GMC Denali XLA roof rack is required first and if you are looking to ease the loading, a lift assist would be important too. The Yukon XL roof weight limit is 150 pounds so that is important in selecting rails, loading 2 kayaks, and their carriers. Yakima makes a solid roof rack option with their 66" roof rack system including parts # Y00410, # Y53TR, # Y03536, # Y00243 A side loading kayak carrier such as the Thule Hullavator # TH898 would help you a great deal loading kayaks. The video below...
view full answer... - Recommended Roof Rack for Drywall and Lumber on 2019 Chevy TahoeFor your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
view full answer... - Roof Platform Tray that Fits 2015 Chevy TahoeI have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
view full answer... - Size Bolts in Yakima Landing Pad 17 KitWe aren't able to get the hardware of the Landing Pad 17 but the kit comes with 8 bolts that are M6x1x30 in size.
view full answer... - Platform Tray that Fits Roof of 2018 Chevy TahoeFor your 2018 Chevy Tahoe we have the Yakima platform tray kit part # Y05045, # Y00148, # Y05042-2, and # Y00243 as a confirmed fit.
view full answer... - Recommended Yakima Roof Rack to Fit 2016 GMC YukonThe best Yakima Roof Rack for your 2016 GMC Yukon consists of: 60 inch JetStream Crossbars # Y00426 (black) SkyLine Towers # Y53TR Landing Pad # Y00243 This is Yakima's quietest, most aerodynamic roof rack. It uses built-in WindRidges to contorl air flow over the bars to reduce wind noise and vibration. The bars are strong, durable, and will support up to 165 pounds. I've attached a video review for you to take a look at.
view full answer... - Recommended Aluminum Crossbars for a 2020 Chevrolet Suburban Hey Andy, for your 2020 Chevrolet Suburban I recommend checking out the Yakima JetStream # Y59KB. These cross bars measure 60" long, is made from lightweight aluminum, and has a black powder coat finish.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Video Edited:
Chris R
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.