To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
A more stable ride starts with your suspension. This anti-sway bar kit helps reduce body roll and keeps your vehicle feeling more planted through curves and crosswinds. That means a calmer drive where you're less tired after long trips.
Long highway drives can become tiring when your vehicle leans through curves or gets pushed around by crosswinds and passing traffic. This front anti-sway bar helps reduce body roll, improve tracking, and increase cornering control so your suspension feels more planted through changing road conditions. Its thicker diameter than many factory sway bars increases torsional roll stiffness, helping your vehicle settle more quickly after weight shifts and making long trips feel calmer behind the wheel.
Handling improvements depend on more than adding a replacement bar. This anti-sway bar uses 4140 chromoly steel to increase strength and durability, while polyurethane bushings resist gas, oil, ozone, abrasion, and heavy loads better than standard rubber bushings. Those design choices help your suspension maintain consistent roll control through curves, uneven pavement, and changing road conditions, keeping your vehicle composed as the miles add up.
Suspension components spend their lives exposed to road debris and the elements, so lasting protection matters. A powder-coated finish helps resist wear and corrosion while the custom-fit design integrates with your suspension system to improve overall handling. Your anti-sway bar continues delivering predictable roll control trip after trip, helping your vehicle retain the same planted feel throughout years of service.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer. Let's take a quick look at this Roadmaster front anti-sway bar. Now this bar has been designed to fit your 2020 to current Ford F600. On custom fit parts such as this bar, I do recommend going through our vehicle pick guide here at etrailer. Pop in the year, make, and model of your vehicle and our pick guide will confirm if this will work for you or if we have something comparable that will work for you.
Now this anti-sway bar is designed to make your vehicle feel more stable and controlled while you're out on the road, especially when you're dealing with curves, crosswinds, uneven pavement, or heavier loads. This one and three quarter inch in diameter bar is thicker than many factory sway bars, which increases the roll resistance and helps keep your vehicle flatter instead of leaning as much from side to side. The added stability can also improve tracking on the highway, so the vehicle's gonna feel more planted and you don't have to make as many steering corrections while you're driving. It's built for durability too. The sway bar is made from strong 4140 Chromoly steel to handle the demands of heavier vehicles and loads.
The polyurethane bushings are designed to withstand oil, gas, ozone, abrasion, and heavy loads, while the black powder coat finish on the bar itself, it's gonna help protect it against wear and corrosion. But overall, this is going to be a solid upgrade if you're looking for less body roll, better highway stability, and a more controlled, confident feel behind the wheel. It includes everything that you see here. If you need help with installation, on this product page underneath the photo section, we have a link that will take you to our installer locator. Click that link, answer the questions that it has for you, and that locator will find an installer in your area that etrailer has partnered with to help you with the install.
Well again, my name's Andy. Thank you for joining me.
Ratings & Reviews
As others have said the sway bar is good but the directions could be improved. Removing the old down link on the drivers side is a bit of a challenge as you can't easily remove the old bracket until you remove the downlink. Unfortunately you can't get the bolt holding the link to the bracket without supporting the fuel tank and removing the rear strap so that you can push the tank over far enough to get the bolt out. Another issue was the old U brackets holding up the old sway bar were on 3" centers where the new bracket is on 2 3/4" centers. This looks like an insurmountable problem until you remove the star washers holding the old bolts where you can see there is a slot which allows you to use the bolts included. The old bolts were both attached to a plate which kept made the center distance between the bolts non adjustable so using the old bolts is not an option. On the passenger side the plate holding the 2 bolts was connected to the axle connection for the height sensing proportioning valve. I removed the 3 bolts holding it, took out the plate and cut off the front most bolt and reinstalled the plate. Fortunately that allowed me to use the old bolt in the plate and for the front most bolt I used one from the kit and achieved the 2 3/4" center spacing needed for the new bracket. All of this would be nice to know when you tackle this job. Fortunately I had all the tools needed to complete the job. I found it easy to install the new bar despite its weight by lifting up one end of the sway bar and loosely attaching it to the the down link. I then did the other side and once both ends were attached I put the center of the bar on my hydraulic jack and lifted it into place. This made it a fairly easy job to position and attach the U brackets to the axle despite the heavy weight of the bar. A video of this process on an older (1998 vintage) Dodge Ram 2500 would be a big help.
Easy to install by myself in the driveway. I replaced both the front and rear anti-sway bars and the improved handling characteristics were noticeable immediately. Fantastic product!
1 of the best purchased I've made for my Fleetwood Discovery. All wandering is now gone. Took an afternoon to install (I'm a retired mechanic) and am very pleased with the outcome. I also purchased an Steering Stabilizer Shock a year before and I improved wandering maybe %25. Both purchases arrived (in Alaska) promptly and in good condition. I Will purchase from eTrailer.com again when needed.
I love this sway bar, and love the service and overall experience with etrailer. My F350 came with factory sway bars front and rear, and I'd replaced the rear bar several years ago, and was impressed with the difference it made. So, more recently I ordered the front bar to replace the smaller factory unit, and it again made a wonderful change for the better. Our Bigfoot truck camper is tall and heavy, but our rig handles wonderfully and has essentially no sway or rock in traffic or on bumpy roads. I highly recommend this sway bar.
I have a hard side slide in camper in the back of my pickup. This is the first time I installed an Anti-Sway Bar of any kind. It took me about 6 hours to install. But it works, and it works really well. I'm glad I took the time to install it.
Easy installation ,done by myself laying on my back in the driveway only took about 1 1/2 hours to do. I have a lift but didn't use it and I think it was easier on the ground for just one person. Sway bar made a big difference in the drivability of my 2003 E350 pleasure way class B
I'll upgrade the front factory bar to the HD Roadmaster bar soon
If you have issues with the handling of your Ford pleasure way start with this sway bar
After a year of usage, I couldn't be happier with the Roadmaster front and rear anti-sway bar kits. The rear kit for my W22 chassy, the mounting hardward would not fit properly. I call Roadmaster directly and they custom built the mounts, painted, and shipped within days.
Grate stuff. Easy to bolt up and figure out. Drive quality improved dramatically and less sway with trailers.
Just in the kit with the grease and red lock tight the hardware washers were one size to large so I got the right ones and installed all is well.
Super quality product build. However it is made for ford transit dually. I have single rear tires. Worked with road master rep to select the correct sway bar for my van.. RM82EQ
you guys did great package was damage RM-1139-149
Roadmaster Rear Anti-Sway Bar - 1-5/8" Diameter the sway bar itself
I Installed the bar in my Ram promaster HR 2500 and it’s an incredible difference on twisty mountain roads. I highly recommend it.
This is a must have for your Motorhome. What a difference in the ride of the coach through the highway washes, the side winds and the side drift of the big rigs. This bar reduces the coach movement by as much as 80% I would say. The installation is easy for someone who is mechanically inclined and still doable for DYIer as long as you have the tools ( standard 1/2” drive tool set, low speed high torque drill for the holes in the frame and a 250 plus ftlbs torque wrench). I would highly recommend this Anti-Sway Bar.
The products itself is good. Works well. But you would think when you spend $800 for something, the directions could be very detailed. There could be a complete video of it being installed. They don't give you specs for torquing any of the bolts and some very lousy pictures with a small amount of instruction. You can do better Roadmaster you want to charge me a lot of money for something then give me great detail on in installing it as well.
After waiting 3 weeks the swaybar kit was drop-shipped from the factory. Received and discovered the bushing inserts were the wrong size (too small) for the bolts that were sent. Contacted Roadmaster support and provided them a photo and invoice as requested. The replacement inserts were approved and shipped out. I got metric bolts to go with the inserts I received. I will save the replacements for additional replacements.
The install was fairly straight forward.
Haven't had a chance to tow the 5th-wheel yet.
a quick fix it to install sway bars front and rear.
I did this and just came home from 2400 mile trip.
installed rear only before we left, then at our destination installed front.
the drive back it handles wayyy better and it sits level now.
""your results may very-use at your own risk. ""
from etrailer.com
rear = RoadMaster 1259-109.
front = RoadMaster RM-1259-105 with RM-590063-00 bracket kit.
i'm sure over time they will flex and stress and start to lien again.
But for now it looks much happier. ( and level )
and i'm very happier with performance and drivability
Seems the big bars help distribute the load to both sides,
you can drive it with one hand now.
and when a truck passes, it's very manageable.
( this could be part the tires on it )
these can be installed in about 6 hours pretty easy.
The hardest thing is drilling the 8 holes in frame. ( 4 front 4 rear. )
We had to shift 2 brake lines over via and small bracket and covers lines with old fuel like to act as wear buffer.
The anti sway bar is a big improvement when the truck bed camper is on. The installation took a bit longer than expected because the frame brackets don’t fit around an aftermarket B&W gooseneck hitch. I had to fabricate new top brackets and drill out the bottom brackets to widen the bolt pattern. Keep this in mind if you have a gooseneck hitch.
Received the product in a timely manner. The shipping company used I’d give a no star rating. I received the anti-sway bar bare out of a box or wrapper with the installation part box and a cut out piece of cardboard with the shipping label on it taped to the bare bar with about five yards of packing tape. The bar was scuffed, scratched and chipped with the RoadMaster label destroyed. I realize it’s going to be installed under the front of my motorhome but as much as it costed I would like to be the one to scratch and scuff it. If I was a company installing this on a customers vehicle I’d return it. I do not believe it was shipped from etrailer in this condition.
I prefer to purchase direct from most manufacturers due to tech support and service. However I find myself purchasing from etrailer.com more and more due to the positive experience, expert tech chat advice, fast shipping and great prices to name just a few. It makes all the difference knowing that you are communicating with a real person and not AI. The Roadmaster 1 3/8” rear sway bar has been my most effective purchase for my truck to date. The SuperSprings SuperSway Stops are right up there in effectiveness as with the rear sway bar. The rear sway bar and SuperSprings SuperSway Stops were very easy to install and I feel like I am driving a different truck. In combination, the two purchases have made the truck and camper feel like one vehicle; no longer does it feel like a truck with something in the bed. VERY stable on turns, twists, hills and angles. I cannot recommend these products enough.
After about a year with both the Roadmaster Rear Anti-Sway Bar and the TorkLift StableLoad Upper Overload Spring Upgrade on our truck camper setup, my experience has been mixed.
With the StableLoads, some of the mounting screws eventually fell out. I contacted etrailer expecting the issue to be handled under warranty, but instead of taking care of the replacement directly, I was referred to the manufacturer. Considering the age of the product and that it was purchased through etrailer, I was disappointed with how the warranty issue was handled.
As for the Roadmaster 1-1/2" rear anti-sway bar, it is a very solid and well-built product, but in our particular application I honestly haven't noticed a major difference in body roll while taking turns with the camper loaded. I have driven the truck both with and without it, and the improvement was much less noticeable than I expected.
Neither product is necessarily bad, but based on our experience, the improvement in handling hasn't been significant enough for me to strongly recommend them given the cost.
Great buying experience with ETrailer. Fast shipping and quality constructed part. Noticeable difference in controlling body sway. Very pleased with the bar and highly recommend Etrailer.
2025 Sprinter 2500 low roof WITH factory sway bar. Added this bar to control the terrible handling at the rear of these vans and it absolutely takes care of that. Be aware that you 100% need the retro-fit kit for this bar to be installed as the factory sway bar end links will NOT work. The retrofit kit that you need is the RM-590064-00.
I have carried a truck camper for 7 years with just Timbrin blocks also from Etrailer and finally made the move to Roadmaster anti sway bars front and rear. Planning a trip to the west coast from Georgia next year and wanted all the help I can get for stability on the mountain roads. Have yet to test but Im sure it will be a noticeable improvement. When my wife takes the wheel so I can have a break she would see-saw the steering wheel to balance the load and it drove me insane. Hoping for relief for both of us.
RM-1109-121 Rear Sway bar for 85 Chevyvan G30 RV. Install was pretty straightforward. I would mount the brackets to the frame first and then the sway bar to the axle. It’s easier to drill the holes without the sway bar getting in the way.
Before I replaced the shocks and upgraded the from sway bar and added the rear sway bar my G30 Chevyvan Winnebago was a wallow wagon. It took 110% focus to drive. Now it drives like a regular vehicle. Smooth. No leaning over when cornering. It’s night and day.
Excellent high quality product made a big difference in handling with heavy Artic Fox camper
Give poor rating regarding installation instructions
Great instructions and nice, high quality fasteners.
Fitment was great and only minor adjustments to my Air lift air bags was needed.
I have a 2013 Ram 3500 Dually with:
-Torklift 30K hitch
-5” Exhaust
-Air lift 7500XL air bags.
The lower brackets for the air bags needed to be moved slightly and I had to cut the excess bolt off on the passenger side.
Do you have a question about this Anti-Sway Bar?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.