Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This sleek, modern bathroom faucet lets you attach a handheld shower set (sold separately) so you can wash up in your RV after a long morning hike. Washerless 1/4-turn stems that prevent leaks so you won't have to worry about wasted water.
Features:
Specs:
The D-spud outlet lets you attach a handheld shower set (sold separately) to make cleaning mud and sand off the kids, pets, and shower walls even easier. To divert the flow of water to the shower set, simply lift the diverter pin on the faucet up.
To install, use the inlet shanks to drop the new faucet in place of your existing faucet. Hand-tighten the included mounting nuts against the underside of the counter, and connect the hot and cold water lines. You'll need to keep some tub and tile caulk (not included) on hand to help prevent any leaking.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Phoenix Faucets, 4 inch dual handle RV bathroom diverter faucet. This unit's going to add or replace a diverter faucet in your RV. It's a lead free design. It's going to feature the dual acrylic lever handles. Gives the unit a really nice look. That's going to feature a quarter turn design, very easy to operate.
They have the H and C on there, which is going to indicate hot and cold. Here on top we're going to have the D Spud outlet for attaching the handheld shower. The handheld shower is not included, those are sold separately and can be found here at etrailer.com. When you're ready to use the shower, all you have to do is lift up on the spout lift rod to divert water flow from the main spout to the shower head. The unit is designed to prevent water back flow, which is going to help prevent contamination of your fresh water supply. It's made from a strong and durable plastic construction. It's going to feature a really nice looking chrome finish.
It does have a low flow aerator on it. That is this component right here, that's already installed. That's going to have a flow rate of 2.2 gallons per minute. The mounting area does require 2 holes for your installation. These connection points right here are the connections for the hot and cold water lines.
These are going to be separated on center by about 4 inches. They're going to have a length measurement of right around 2 inches long. They're going to give us an outer diameter of 13 1/16's of an inch, with an inner diameter of a half inch. Then that D Spud connection point, that's going to have an outer diameter of 13 1/16th's of an inch. We're going to take a few measurements, starting with just the base. That's going to give us a depth measurement of about 2 and 1/8th of an inch.
Measuring edge to edge, the unit's going to give us a length measurement of about 6 and 1/4 inches. If we take a height measurement from the mounting surface, we can see that that's going to give us a measurement of just over 3inches, maybe 3 and 1/8th, from the mounting surface to the tallest point of the unit. Measuring the overall depth from the back of the base to the furthest out point, we can see that's going to measure just over 5 inches, maybe 5 and 1/4 inches, right in that area. Then the water outlet height, measuring from the mounting surface. Measuring from this point right here, mounting surface to the closest point of the low flow aerator, that's going to give us a measurement of about an inch and a 1/4. Pretty simple installation. Again, it's going to require 2 mount holes. Those holes need to have a diameter of 1 inch, separated on center by 4 inches. It's going to come with that nice backing plate. That's a one piece design, and it's going to come with the threaded mounting nuts. It does include detailed installation instructions. These are designed to walk you through the installation process step by step. They've got nice detailed diagrams there to help you with that. On this side it's going to go over some operating instructions and some helpful hints. Then on the backside it's going to have a detailed breakdown of the parts list. That's going to do it for today's look at the Phoenix Faucets 4 inch dual handle RV bathroom diverter faucet.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
they fit right in and work great
This is a poor quality product. The divertor failed in 2 weeks.
I replaced the manufacturer's standard with the Phoenix Faucet, and it was easy to replace and works better than the original.
This faucet will dress up the bathroom very well.
Fiy perfectly in my Casita RV. Easy to install too.
The faucet was an exact replacement and was an easy install.
Fast shipping--smooth transaction-- Tha nks
Looks good fast shipping
useful inexpensive faucet for my sailbo at
Easy replacement/install, no issues. Still working fine after a year.
Works and looks good and is much nicer than the original one. This setup with the separate diverter control works a lot better than the ones which just have the hose connected to the diverter which you just pull up.
High quality parts
Immediate service and follow through!!
Well done!
Good sales response and quick shipping. Product tougher than it looks.
Prompt shipping and great product to replace faulty diverter shower faucet in my Lance truck camper. Thank You.
I purchased this faucet for a boat bathroom and it fit the existing holes perfectly, no adjustments needed. The shower handle fit easily onto the diverter. The product is plastic but has a great chrome look and functions as needed.
Difficult to find this item. Glad they had it and it arrived in a timely manner in perfect condition.
The Phoenic Catalina RV Bathroom Faucet w/D-Spud Dual lever handle arrived today just in time for our next trip. The unit was easy to install and needed no tools. Every nut was hand tightened. I tested the function of the diverter and it worked. There were no leaks as well. I like the handles for the hot and cold. The old unit's handles were confusing as to whether the water was on or off. The Phoenix's handles provide no doubt.
Looks great right out of the box. Installed very easily in my RV trailer lavatory sink. No leaks. Love the 1/4 turn handles. Great product at a reasonable price. Considering a matching faucet assembly for the kitchen sink.
Not the right size
Great price. Quick delivery. Works perfectly. Thank you
Excellent customer service and delivery speed.
Havn't actually tried it yet, but it hooked up easy to my marine head, and it looks great!
The design is perfect for my travel trailer. I just need someone to install it and along with the shower part I purchased from your company. Winter is on the way, so that is my project for next Spring.
Really the faucet was installed last May. The RV has not had water to it. So have never tested the faucet. It was part of on going refurbishing of a 22 year old Class B+ RV that I bought a year ago. Also part of this work we've ordered and installed from e-trailer your Dometic 310 toilet, a MaxAir Fan, & other items all installed but some untested. The fan works great. The toilet seems to as we made sure the black and grey tanks were cleaned out well by pouring water down the drains and toilet. We will repeat this spring when it comes out of winter storage. The fresh water tank was removed to repair water damage below it and in the wall it blocked both. We also had to sanitize the tank due to mold entering it where previous owners allowed the air intake hose to flap about un-attached causing the leaks and water damage to the floor. We know the Ford Engine is in decent condition but due to so much unexpected work we are behind a good year getting Miss Mini Mo on the road and fully activated. She's come a long ways & with your help with parts like this. Which btw was almost identical to the one removed. We'll treat her with far more respect than the previous owners have. Thanks e-trailer no doubt we'll be back for more STUFF once we bring her out of winter storage.
Leslie
2/14/2025
ITs been 2 years. Again no water through the RV plumbing yet. The Fresh H2O tank was removed & sanitized. The lines yet to be fully sanitized & have not attempted pressurized fresh water yet either. The holding tanks were cleaned last Sept & winterized until this coming April-May time. We will be testing it all out then. Miss Mini Mo was neglected & abused by previous owners. I took it on my self to fix & renovate & update her. Taking close to 2 years to accomplish all. This sink was identical to the original & fitted prefectly & we had a professional business do the installation. Along with the new toilet also from E-trailer.
Robin H.
2/16/2025
It's a basic faucet that works like it should.
Do you have a question about this RV Faucet?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
2/17/2023
We went on a trip last week and it did just fine. No leaks!