bing tracking image
Customer Service My Orders
  1. RV Awning
  2. Solera
  3. Patio Awnings
  4. 10 Feet Wide
  5. Black
  6. Fabric/Rollers
Replacement Roller and Fabric Kit for 10' Solera Power and Hybrid RV Awnings - Solid Black
Add to Cart
Solera

Replacement Roller and Fabric Kit for 10' Solera Power and Hybrid RV Awnings - Solid Black

Part Number: LCV000211447
93 Reviews | 16 Questions
In Stock
$601.57
Retail:$645.95
You Save: $44.38
 RV Awning
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

solera rv awning fabric/rollers manufacturer
solera rv awning patio awnings fabric/rollers replacement roller and fabric kit for 10' power hybrid - solid black
solera rv awning fabric/rollers lcv000211447

Show All (3) Product Images

Show Fewer Product Images

Videos

Show All (2) Videos

Show Fewer Videos

Need help with installation?
Locate installers near me
Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Solera 10' hybrid and power awnings that extend 8' from your RV. Installs more easily than replacing just the fabric. Great Prices for the best rv awning from Solera. Replacement Roller and Fabric Kit for 10' Solera Power and Hybrid RV Awnings - Solid Black part number LCV000211447 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (93)
  • Q & A (0)
  • Related Parts
  • Photos

Solera RV Awning - LCV000211447

Highlights

  • Save Hours on Awning Replacement: Roller and fabric come pre-assembled for faster install—no tedious re-feeding or centering needed.
  • Keep Shade Strong and Seamless: Heavy-duty 13.5-oz vinyl is cold-crack tested to -25°F and built for long-term outdoor use.
  • Prevent Leaks and Water Damage: Heat-welded seams keep out moisture, stopping drips and fabric separation over time.
  • Get a Clean, Modern Look: Solid black fabric and matching roller tube give your setup a sleek, uniform finish.
  • Fits 10' Solera Power or Hybrid Awnings: Designed for 8' projection systems with 10' arm spacing for exact replacement.
  • Simplify Installation: Roller slides directly into awning arms and attaches to awning rail (LC715217 sold separately).
Made in USA

Features to know about

Replace Old or Damaged Awnings Fast: Fabric and Roller Come Pre-Assembled

This replacement roller and fabric kit takes the headache out of swapping a worn or torn awning. The roller comes pre-installed with the solid black fabric, so you won’t have to mess with feeding fabric into a tube or stretching it straight. Just slide one end of the fabric into your awning rail and attach each end of the roller to your Solera support arms. Roll it in and out a few times, and you’re done.

Built to Last Through Harsh Conditions: Heavy-Duty 13.5-oz Vinyl Construction

The premium 13.5-oz vinyl fabric is made for heavy outdoor use. It’s cold-crack tested down to -25°F, so it won’t stiffen or split when the temperature drops. Heat-welded seams seal out water to prevent leaks and mold buildup. The solid black color also helps resist sun fading while adding a clean, modern look.

Sized Right for a 10' Power or Hybrid Awning: Accurate Fit with 8' Projection

The roller measures 10' wide, and the fabric measures 9' 1" (109") wide, designed for Solera 10' hybrid or 12V, 18V, and Smart Arm power awnings with an 8' projection. To make sure you get the correct fit, measure from the center of your left awning arm to the center of your right arm—don’t go by the old fabric width since it’ll be too short.

Keeps Installation Simple: Hardware and Endcaps Ready to Go

The assembly comes with the endcaps already installed on the roller, so there’s no need to set spring tension or add extra components. You can reuse your existing hardware for installation. The roller tube easily slides onto each awning arm head, and the required awning rail (LC715217, sold separately) attaches the fabric to your RV.

Reliable Coverage Season After Season: Backed by Strong Warranties

The roller assembly includes a 1-year limited warranty, and the fabric is covered for 5 years. That means you can count on long-term durability and dependable protection against rain, debris, and sun exposure every time you set up your awning.

Specs

Application

  • Application: Solera 10' hybrid or 12V, 18V, and Smart Arm power awnings with an 8' projection
  • 10' Width is measured from: Center of left arm to center of right arm

Diagram showing how to measure from the center of the left awning arm to the center of the right arm for selecting the correct Solera RV awning roller and fabric replacement kit.

Dimensions

  • Fabric: 9'1" (109") wide
  • Roller tube: 10' wide

Warranty

  • Awning roller: 1-Year limited
  • Fabric: 5-Year

V000211447 Replacement Lippert Solera Hybrid and Power Awning Roller Assembly - 10' Awning - 9'1" Fabric - Solid Black







Customers Who Purchased This RV Awning Also Bought...





Ratings & Reviews

4.7

93 reviews
5 Stars
(76)
4 Stars
(12)
3 Stars
(2)
2 Stars
(1)
1 Star
(2)
Review Sort Icon
by:
?????

Installed this awning roll tube assembly today, and everything fit exactly as it should. The assembly arrived in good condition, was straightforward to install, and operated smoothly once completed. The construction feels solid, and the awning rolls in and out evenly. Very satisfied with the quality and fit.
Kate F. profile picture
Etrailer Expert

Kate F.

8/31/2026

I am glad we had the right fit to keep you shady on your adventures Derek! What was your favorite adventure this year?

by:
Great product. fit well and easy instal.
Also great customer service from etrailer.
Kenny profile picture

Kenny

5/4/2026

Still looks like new. great product,would buy it again

by:
The awning and tube was well packaged and product undamaged.
by:
Perfect replacement on my 2018 Thor Freedom Elite 30FE
by:
excellent service as always from etrailer came surpisingly quick great people to do business with and will continue to do so
by:
Typically people buy these for RV installations or replacements, I’m an avid RV’er and like most of us have awnings on our rigs. I decided why not on my house too! They’re easy to install and adjustable to give us the summer shade on the back of our house which faces due West. The only thing you need to do is buy a 115vac to 12vdc converter that can handle up to 80% of 30amps. Plenty of those are available. Using the Lippert “smart” arms also provide additional flexibility.
Customer Large Image
Customer Image
Click to Enlarge
by:
I am extremely happy with my new awning. My original awning was destroyed by my own neglect. ETRAILER.COM was great, ordered a new awning unfortunately came in damaged. Contacted ETRAILER.COM sent a couple of pictures, and they sent me a whole new awning. With thier videos and instructions, it was extremely easy to install. I will recommend them to anyone that needs a new awning. Thank you ETRAILER.COM!
Customer Large Image
Customer Image
Click to Enlarge
by:
Easy to install at a great price. Exactly what I was looking for.
by:
Stacey A. and the entire etrailer team are outstanding!
Replacement awning fabric and roller tube kit was exactly what I needed and it shipped quickly.
by:
I will recommend etrailer for all. everything I order came with in the time. I was very happy with the free shipping offered.
Aaron profile picture

Aaron

3/16/2025

I screwed up and ordered the wrong one, but I put my own led lights in, so my mess up still worded i am very happy with its still

Kate F. profile picture
Etrailer Expert

Kate F.

3/17/2025

@Aaron Glad you were able to get things figured out Aaron!
by:
I still don’t have the product and I want a refund!!
by:
So far, I have not uncrated the item as it is raining at our location. The customer service and delivery team have been simply awesome!!!
by:
Worked great, easy to install. Very happy.
by:
Great customer service!
Great shipping service.
All around excellent experience.
by:
It looked great. When the RV Repair Tech arrived and removed it from the shipping tube, it had been driven over with something pretty heavy. It broke the tube completely into and put a large flat spot on the roll. Tech saw it and said it could not be installed.
Mike L. profile picture
Etrailer Expert

Mike L.

9/4/2026

That's not good!! I'll get that replaced for you.

by:
Got the awning and it worked good. The package was damaged on the end but luckily the awning tube was not damaged. Thanks
by:
Delivery was a little off schedule (I guess do to factory coordination?) but telephone assistance and product delivery/quality were Good!
by:
Exactly like the stock one. At least before I ripped it off on that one lane road an hour outside of Nashville. Easy to replace. Pretty straight forward and it works like a charm.
by:
Great product, but wish it provided a way to mount my awning light the way my original awning did. There were no other issues.
by:
This was an exact replacement for a 10 year old camper/awning. etrailer had the materials in stock and the web site was easy to order from. I did note on the tracking info that there was damage reported early in the shipment. When the package arrived at the local terminal I received an delivery scheduling phone call. We discussed the note in the shipping history (the scheduler even sent me a pic from his cell) and I was able to convince the shipper to reject prior to delivery thus saving a good deal of hassle. A phone call to customer service at etrailer explaing the circumstance yielded a quick shipment of another awning. The awning came in a couple days and I was able to get it installed prior to a major trip.

First class customer service from etrailer!
Perfect part installed in about an hour.
by:
The awning is made very well. The end caps would not work on my arms. I was able to use the ones from my old tube. The length of the tube and material was 3 inches shorter than the awning I replaced. I had to modify it and add a piece of metal to make it wide enough so it would retract and line up with the arms. It is working fine. I was given conflicting information from e-trailer about if it would work with my current frame. I had no other choice but to modify and make it work.
by:
I think I may have,ordered the wrong product. I have a power awning and this appears to be for a manual system. Going to attempt to use the motor off existing tube. Thanks
Katrina B. profile picture
Etrailer Expert

Katrina B.

3/18/2022

I have checked out this product and spoke with one of our installers and the awning you had purchased LCV000223189 is a replacement for power awnings. As long as you have the Solera RV arms, this awning will fit perfectly into your set up. I have also attached a link below of our installation video., showing this particular awning being installed onto Solera power awning arms.

Helpful Links

tv-review-lippert-solara-replacement-awning-roller-and-fabric-lcv000286920.aspx

by:
Great add putting the electric awning on my rig. Reasonably easy to install and works great. Love the adjustable extension arms to lower a corner to run water off in one direction.
by:
This awning is a better quality than the original. It was very easy to replace even though we aren't professionals. Take note of how the original was set. Read the instructions. Easy! Thank you, etrailer!
by:
Awesome product.Thanks to Bob and his crew for the great install. See the install video.
Joe H. profile picture

Joe H.

5/3/2022

Holding up very well. No cracking or peeling.

25
93
true
Show More Reviews

See what our Experts say about this Solera RV Awning

Do you have a question about this RV Awning?
  • Parts Needed to Add 10' Awning to 2013 Starcraft AR-One 14RB
    Hey Alton! To add a 10' awning to your 2013 Starcraft AR-One 14RB you can use the following: -Solera 12V Electric RV Awning Conversion Kit - 69" Arms - Black # LC434723 -Solera 12V Electric RV Awning Conversion Kit - 69" Arms - White # LC434724 -Replacement Roller and Fabric Kit for 10' Solera Power and Hybrid RV Awnings - White Fade # LCV000211450 -Replacement Roller and Fabric Kit for 10' Solera Power and Hybrid RV Awnings - Black Fade # LCV000211446 -Replacement Roller and Fabric...
    view full answer...
  • Installation of Replacement Roller and Fabric Kit for 10' Solera Power and Hybrid RV Awnings
    Hello again Jeff; you wont' have to tension anything to install the # LCV000211447. All you're really doing is removing the cover from the head of the arm, removing the screw holding the existing roller, pulling the old roller and fabric, then reversing the process. I attached an installation video below so you can see the entire process.
    view full answer...
  • Need To Replace Dometic Awning MFR 916FT.21 501UL PNC 958603680
    Hello Dale, thanks for reaching out. We do carry Solera awnings which can be used to replace Dometic awnings. I was not able to find any reference for the part number you provided, but it appears to be a 16' awning, correct? If so, we can provide a black awning to replace this. Here is what I recommend: - Replacement Roller and Fabric Kit for 16' Solera Power and Hybrid RV Awnings - Solid Black # LCV000211487 - Solera 12V Electric RV Awning Conversion Kit - 69" Arms - Black # LC434723 -...
    view full answer...
  • Will Replacement Roller and Fabric Kit Need Additional Parts for Installation on 2015 Jayco
    Hi Jeff; the Replacement Roller and Fabric Kit # LCV000211447 will not need any additional parts to replace the roller and fabric on your 2015 Jayco Jay Flight Swift SLX 184BH. You will use the existing hardware for the installation. As long as you measured 10' from the center of your left arm to the center of the right arm this will fit your Solera hybrid or power awning.
    view full answer...
  • Recommended Awning for 2016 R-POD 178
    We can recommend items for a (our shortest width) 10' width awning or larger widths, but there really isn't a specific awning for the 2016 R-Pod 178. The shape of the R-Pod campers make it slightly more challenging for adding an awning but it can be done on some models. If your camper has room to support a 10' awning, I suggest the following items: To add the 10' Awning # LCV000211447 you will need: - Solera Manual Pull Style Awning Drive Head # LC271181 - Solera Manual Pull Style Awning...
    view full answer...
  • Parts Needed to Install 10 Foot Awning on Starcraft AR-ONE
    To install a 10 foot awning in black on your StarCraft AR-ONE you'd need the following products: 10 foot awning and roller part # LCV000211447 Solera Power Conversion kit part # LC434723
    view full answer...
  • Complete Replacement Awning for 2015 Keystone Cougar XLite 28SGS
    The full kits we sell like the # LC56AF you looked at start at 11' wide. You could use this or the black version # LCV000334909-362243 if you have the space and would like the XL awning with the 9'8" projection. These arms require 78" of space on the wall from the awning rail straight down for each bracket. It also requires at least 4-1/2" of clearance between the awning rail and the top of your entry door. If you also need to replace the awning rail extrusion you can use # LC715216 or...
    view full answer...
  • Replacement Awning Solution for 2022 R-Pod 193
    We have all the parts necessary to add an awning to your R-Pod 193. To add a10' Awning # LCV000211447 you will need: - Solera Manual Pull Style Awning Drive Head # LC271181 - Solera Manual Pull Style Awning Idler Head # LC272397 - Solera Manual Awning Pull Strap # LC2810801 - Two of Solera 63" Short Awning Support Arm # LC97UD
    view full answer...
  • Components Needed to Add an Awning to a 2016 Forest River R-Pod Travel Trailer
    It looks like the 2016 Forest River R-Pod Travel Trailers have space for a 10' awning. With that in mind, to add one to your R-Pod, you will need each of the following components: For the awning itself, you can use part # LCV000211447. It measures 10' long and extends 8' out. It's a solid black fabric. For the drive head, you can use part # LC272067. For the idler head, you can use part # LC273479. For the pull strap, you can use part # LC292794. For the support arm, you can use part #...
    view full answer...
  • Parts Needed to Install a Solera Awning on a 2013 R-Pod 177
    We have had a similar question come up before and the below information outlines the parts needed to install awning # LCV000211447. For a 10 foot awning # LCV000211447 you will need several other components: Solera Manual Pull Style Awning Drive Head # LC271181 Solera Manual Pull Style Awning Idler Head # LC272397 Solera Manual Awning Pull Strap # LC292794 Two of Solera 63" Short Awning Support Arm # LC97UD The only other part you would need that we don't have is the awning rail. That...
    view full answer...
  • Replacement Leaf Springs For A 2012 Startcraft AR-ONE 15RB Travel Trailer
    Hi Tyler, There unfortunately isn't a guide to tell us what leaf spring your trailer has so we'll need a bit of information to find the correct replacement. First you'll want to take a look at the axle tube for a sticker that lists the capacity. If the sticker is gone then measure the diameter of the axle tube. Pretty sure you have a 3,500lb axle but I'd like to verify first. Next you'll want to lift the trailer by the frame to take pressure off the non-broken leaf spring and measure...
    view full answer...
  • Material Width of 10 Foot Solera Slide-Topper Awning
    The material of the Solera 10 foot slide-toppers, like part # LCV000211447 in solid black, measures about 9 feet and 4-1/2 inches wide. I confirmed this with Lippert.
    view full answer...
  • Awning Parts Needed for 10' Support Arm Spacing
    For mounting brackets that are spaced apart 10' you'll need a 10' awning like the Solid Black # LCV000211447, the 8' Long Awning # LC715217, and then the Classic Manual # LC434717 or XL Power # LC362243 awning arm kit. If you were wanting a different color fabric I've linked our selection of 10' fabrics for you to filter through. Attached are a few videos for you to check out. If you were needing something else please let me know!
    view full answer...
  • RV Awning Recommendation Closest to 8 Foot by 8 Foot
    We have 8 foot by 10 foot in length, but not 8 foot by 8 foot! Would that be close enough? If so the part # LCV000211447 is black and is 8 feet wide and 10 feet long.
    view full answer...
  • Does Replacement Roller and Fabric Kit Come With Screw to Attach Endcap to Pin
    The Replacement Roller and Fabric Kit # LCV000211447 comes with the endcaps installed but does not have the two screws to attach to the pin on the awning arm. So if you're looking for some of the six screws that attach the two endcaps to the roller they're already on there. I reached out to Lippert about the two screws for the pins and for whatever reason they have no idea what size they are. My recommendation is to take the end cap and pin to a local hardware store to find what fits.
    view full answer...
  • Parts Needed to Add 10 Foot Awning to Side of RV Slide Out
    To install a 10 foot awning in black you'd need the following products: 13 foot awning and roller part # LCV000211447 Solera Power Conversion kit part # LC434723
    view full answer...

Do you have a question about this RV Awning?


Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Mike S
Updated by:
Mike S
Employee Amanda K
Updated by:
Amanda K
Employee Kristen H
Written by:
Kristen H
Employee Bradley B
Installed by:
Bradley B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.